无明胶重铬酸盐全息记录材料及实时特性

本文简要报道无明胶重铬酸盐全息记录材料的基本特性及其实时效应。实验中获得了正负一级实时衍射效率高达25％的平面透射光栅。     

相匹配契伦可夫辐射式倍频

用波导产生倍频波时,如果倍频波进入辐射模区,仍然有相匹配问题。契伦可夫辐射式倍频不是自动地实现相匹配的。相匹配要求导波基波模式场,倍频传输场(自由波),倍频触发场,以及经多次反射透射后的辐射场的迭加形成的总辐射场处于同步的相匹配状态。根据这个相匹配的分析,提出波导契伦可夫相匹配的特有的方法,那就是对波导的模色散进行设计,并指出非对称波导的特有优点,是改变一个边界上的反射相变,即选择不同色散的线性材料作包层,由此可得到相匹配的高效契伦可夫倍频辐射。     

Ultrasound-assisted solution crystallization of fotagliptin benzoate: Process intensification and crystal product optimization

The ultrasound-assisted crystallization process has promising potentials for improving process efficiency and modifying crystalline product properties. In this work, the crystallization process of fotagliptin benzoate methanol solvate (FBMS) was investigated to improve powder properties and downstream desolvation/drying performance. The direct cooling/antisolvent crystallization process was conducted and then optimized with the assistance of ultrasonic irradiation and seeding strategy. Direct cooling/antisolvent crystallization and seeding crystallization processes resulted in needle-like crystals which are undesirable for downstream processing. In contrast, the ultrasound-assisted crystallization process produced rod-like crystals and reduced the crystal size to facilitate the desolvation of FBMS. The metastable zone width (MSZW), induction time, crystal size, morphology, and process yield were studied comprehensively. The results showed that both the seeding and ultrasound-assisted crystallization process (without seeds) can improve the process yield and the ultrasound could effectively reduce the crystal size, narrow the MSZW, and shorten the induction time. Through comparing the drying dynamics of the FBMS, the small rod-shaped crystals with a mean size of 9.6 μm produced by ultrasonic irradiation can be completely desolvated within 20 h, while the desolvation time of long needle crystals with an average size of about 157 μm obtained by direct cooling/antisolvent crystallization and seeding crystallization processes is more than 80 h. Thus the crystal size and morphology were found to be the key factors affecting the desolvation kinetics and the smaller size produced by using ultrasound can benefit the intensification of the drying process. Overall, the ultrasound-assisted crystallization showed a full improvement including crystal properties and process efficiency during the preparation of fotagliptin benzoate desolvated crystals.     

Modeling and Performance Optimization of an Irreversible Two-Stage Combined Thermal Brownian Heat Engine

Based on finite time thermodynamics, an irreversible combined thermal Brownian heat engine model is established in this paper. The model consists of two thermal Brownian heat engines which are operating in tandem with thermal contact with three heat reservoirs. The rates of heat transfer are finite between the heat engine and the reservoir. Considering the heat leakage and the losses caused by kinetic energy change of particles, the formulas of steady current, power output and efficiency are derived. The power output and efficiency of combined heat engine are smaller than that of single heat engine operating between reservoirs with same temperatures. When the potential filed is free from external load, the effects of asymmetry of the potential, barrier height and heat leakage on the performance of the combined heat engine are analyzed. When the potential field is free from external load, the effects of basic design parameters on the performance of the combined heat engine are analyzed. The optimal power and efficiency are obtained by optimizing the barrier heights of two heat engines. The optimal working regions are obtained. There is optimal temperature ratio which maximize the overall power output or efficiency. When the potential filed is subjected to external load, effect of external load is analyzed. The steady current decreases versus external load; the power output and efficiency are monotonically increasing versus external load.     

Ultrasound freeze-thawing style pretreatment to improve the efficiency of the vacuum freeze-drying of okra (Abelmoschus esculentus (L.) Moench) and the quality characteristics of the dried product

Vacuum freeze-drying is a new and high technology on agricultural product dehydrating dry, but it faces the high cost problem caused by high energy consumption. This study investigated the effect of ultrasound (US), freeze-thawing (including the freeze-air thawing (AT), freeze-water thawing (WT), freeze-ultrasound thawing (UST), and freeze-air ultrasound thawing (AT + US)) pretreatments on the vacuum freeze-drying efficiency and the quality of dried okra. The results indicated that the application of ultrasound and different freeze-thawing pretreatments reduced the drying time by 25.0%–62.50% and the total energy consumption was 24.28%–62.35% less. The AT pretreatment reduced the time by of okra slices by 62.50% and the total energy consumption was 62.35% less. The significant decrease in drying time was due to a change in the microstructure caused by pretreatment. Besides, the okra pretreated with the US retained most of the quality characteristics (flavor, color, hardness, and frangibility) among all methods, while, AT + US had the most changeable characteristics in quality, which is deprecated in our study. The okra pretreated with the US and AT, separately, had the best dry matter content loss (9.008%, 5.602%), lower chlorophyll degradation (5.05%, 5.44% less), and higher contents of total phenolics, total flavonoids, and pectin, with strong antioxidant capacity, compared to other methods. The pretreatments did not have a large effect on the functional groups and the structure of pectin, but slightly affected the viscosity. It can be concluded that AT and US pretreatment methods are better than others.     

减反膜对单晶硅太阳能电池性能的影响分析

在太阳能电池效率的评价中,电池材料、掺杂浓度、扩散长度等都是比较重要的参数,合理地改变相关参数可以优化太阳能电池的性能,提高电池效率。此外,在太阳能电池表面镀一层具有减反作用的光学薄膜（简称减反膜）也是提高电池效率的重要手段。以提高电池效率为目标,对单晶硅太阳能电池的掺杂浓度和扩散长度等微观参数进行计算优化,分析了掺杂浓度和扩散长度变化对电池效率的影响。并在此基础上分析了不同类型的减反膜对于电池效率的影响,给出了最佳减反膜材料及其膜系厚度,并且结合镀膜后电池量子效率的变化验证了其准确性。结果表明,在优化电池掺杂浓度和扩散长度的基础上,选择合适的减反膜,电池效率最高可达20.35%,相比于优化前提高了8.25%。     

Characterization of inner layer thickness change of a composite circular tube using nonlinear circumferential guided wave:A feasibility study

The feasibility of using the nonlinear effect of primary circumferential guided wave (CGW) propagation for characterizing the change of inner layer thickness of a composite circular tube (CCT) has been investigated. An appropriate mode pair of the fundamental and double-frequency CGWs (DFCGWs) has been selected to enable the second harmonics of primary wave mode in the given CCT to accumulate along the circumferential direction. When changes in the inner layer thickness (described as the equivalent inner layer thickness) take place, the corresponding nonlinear CGW measurements are conducted. It is found that there is a direct correlation between change of equivalent inner layer thickness of the CCT and the relative acoustic nonlinearity parameter (Δβ) measured with CGWs propagating through one full circumference, and that the effect of second-harmonic generation (SHG) is very sensitive to change in the inner layer thickness. The experimental result obtained demonstrates the feasibility for quantitatively assessing the change of equivalent inner layer thickness in CCTs using the effect of SHG by primary CGW propagation.     

Electronic and optical properties of 3N-doped graphdiyne/MoS2 heterostructures tuned by biaxial strain and external electric field

The construction of van der Waals (vdW) heterostructures by stacking different two-dimensional layered materials have been recognised as an effective strategy to obtain the desired properties. The 3N-doped graphdiyne (N-GY) has been successfully synthesized in the laboratory. It could be assembled into a supercapacitor and can be used for tensile energy storage. However, the flat band and wide forbidden bands could hinder its application of N-GY layer in optoelectronic and nanoelectronic devices. In order to extend the application of N-GY layer in electronic devices, MoS₂ was selected to construct an N-GY/MoS₂ heterostructure due to its good electronic and optical properties. The N-GY/MoS₂ heterostructure has an optical absorption range from the visible to ultraviolet with a absorption coefficient of 10⁵ cm^-1. The N-GY/MoS₂ heterostructure exhibits a type-Ⅱ band alignment allows the electron-hole to be located on N-GY and MoS₂ respectively, which can further reduce the electron-hole complexation to increase exciton lifetime. The power conversion efficiency of N-GY/MoS₂ heterostructure is up to 17.77%, indicating it is a promising candidate material for solar cells. In addition, the external electric field and biaxial strain could effectively tune the electronic structure. Our results provide a theoretical support for the design and application of N-GY/MoS₂ vdW heterostructures in semiconductor sensors and photovoltaic devices.     

采用组合引导磁场的多注二极管设计

分析了采用单一同轴磁场时强流相对论多注阴极的侧端发射问题,研究了在不同磁场内半径和多注漂移管长度情况下多注电子束的传输效率。研究发现：由于引导磁场尺寸有限,高压下多注阴极杆及多注阴极柱的电子束发射是影响多注电子束传输效率的主要因素,且该部分电子束对多注漂移管入口管壁的轰击直接影响了多注速调管的重频能力。设计了采用永磁铁和同轴磁场组合工作的强流相对论多注二极管,理论分析和模拟计算证明：基于组合磁场的多注二极管可明显减弱甚至抑制多注阴极发射球头以外的电子束发射,并且组合磁场的磁场位形和强度可满足强流相对论多注电子束的高效、稳定传输。

     

气力提升系统气液两相流数值模拟分析

污水处理、油田采油、液态金属冷却反应堆和磁流体动力转换器等领域采用气力提升系统有其显著优势.由于不同液体介质与气体介质密度对气力提升系统性能影响较大,因此本文基于Fluent仿真软件,采用欧拉模型、k-ω剪切应力输运湍流模型数值模拟了氮气-水、氮气-煤油、氮气-水银及空气-水、氩气-水、氮气-水下气力提升系统内气液两相流动行为,分析了系统稳定时提升立管内气相体积分数、提升液体流量、提升效率、提升管出口处液体径向速度的变化规律.研究结果表明:1)氮气-水、氮气-煤油、氮气-水银系统中,提升管内液体介质密度越大,提升管内气相体积分数越小、提升液体流量越大、提升效率越高;2)空气-水、氩气-水、氮气-水系统中,提升管内气体介质密度越大,提升管内气相体积分数越小、提升液体流量越大、提升效率峰值越小;3)提升管出口处提升液体径向速度随气体充入量的不断增加而整体波动升高,最终管轴中心附近液体速度较大,管壁附近液体速度较小.本文研究成果为污水处理、气举采油、液态重金属冷却核反应堆和磁流体动力转换器等应用领域的气力提升技术的优化提供科学的理论基础.