BLENDS OF STYRENE-BUTADIENE-STYRENE TRIBLOCK COPOLYMER AND ISOTACTIC POLYPROPYLENE. REINFORCING EFFECT OF POLYPROPYLENE AT HIGH TEMPERATURES

Blends of styrene-butadiene-styrene (SBS) triblock copolymer with isotactic polypropylene (iPP) or maleic anhydride–grafted polypropylene (MAP) were prepared in a twin-screw extruder. Static and dynamic experiments at room temperature in previous works showed that the added homopolymers have a significant influence in the improvement of the general mechanical properties of the SBS when the homopolymer is the dispersed phase. Our aim was to study the reinforcing effect as a function of temperature. When the glass transition of the polystyrene blocks in the SBS is approached (40°C–50°C in static experiments), there is a significant worsening of the failure properties, as well as a profile change in the stress-strain plot. If a reinforcing hard phase is added, these changes can be decreased. The temperature dependence of the reinforcing effect of the added homopolymer was evaluated with the analysis of tensile experiments in terms of various theoretical models. A modified activation energy model with temperature-dependent parameters was used to describe the nonlinear regime and quantitatively compare the properties of the different blends with those of pure SBS.     

受激布里渊散射新介质——全氟胺的研究

本文从介质化学结构与受激布里渊散射(SBS)特性的关系入手,寻找出了SBS特性良好的全氟胺系列新介质——FC-131,FC-3283,FC-40,FC-43,FC-70等,并测定或计算出了新介质的SBS参数. 结果表明,新介质的吸收系数均小于10^-3 cm^-1,光学击穿阈值均高于100 GW/cm². 全氟胺系列新介质不仅具有良好的SBS特性,而且还具有无毒、低挥发性和高稳定性等一系列独特的物理化学性质. 新介质的发现不仅增加SBS介质的种类,而且能够有效提高SBS系统的性能,对于SBS相位共轭镜在高功率激光系统中的应用打下了良好的基础. 关键词： 受激布里渊散射(SBS) 全氟胺 吸收系数 光学击穿阈值     

Rheological properties of asphalt/SBS/clay blends

The effect of the addition of clay as a third component in polymer modified asphalts has been investigated. After a preliminary investigation on the binary asphalt/clay and polymer/clay blends, the tertiary blends were prepared by adding the clay and polymer to the asphalt, either separately or in the form of a premixed master batch. Intercalated nanocomposites with comparable interlayer distances and glass transition temperatures were obtained in both cases. However, the results show that the mixing procedure significantly affected the final rheological properties. The master curves built in the linear viscoelastic range and represented in both the frequency and the temperature domains help to visualize and evaluate such differences.     

Structure and Properties of Nanocomposites Based on SBS Block Copolymer and Alumina

The addition of inorganic filler into commodity plastics has a long history. Today, polymer composites based on nanosized filler are popular among polymer scientists from academia and industries due to their ability to enhance a number of physical properties. In this work, we investigate the dispersion and reinforcing effect of alumina nanoparticles using a polystyrene-polybutadiene based block copolymer (SBS) and organically modified alumina nanofiller. With the aid of solution casting procedures, polymer composites with good dispersion of nanoparticles could be produced. It has been demonstrated that with suitably coated nanoparticles, polymer composites with optimum dispersion of nanofiller ensuring marked reinforcement effect can be achieved.     

Chemical initiation of graft copolymerization of methyl methacrylate onto styrene–butadiene block copolymer

When a solution containing both styrene–butadiene block copolymer (SBS) and methyl methacrylate is treated with an initiator both homopolymerization of the methyl methacrylate and graft copolymerization of the methyl methacrylate onto the SBS occur. The amount of graft copolymerization depends upon the time and temperature of the reaction, the concentrations of all species, and the identity of the solvent and initiator. The combination of benzoyl peroxide in chloroform gives the highest graft yield and the reaction occurs by removal of an allylic hydrogen from the SBS by the initiator radical and subsequent addition of monomer units to that site; there is a significant solvent effect. Both AIBN and BPO function by the removal of an allylic hydrogen atom from SBS; BPO is able to effect this reaction relatively easily while AIBN can remove the hydrogen atom only with great difficulty and to a limited extent. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 965–974, 1997     

Sasobit对SBS改性沥青性能的影响研究

为揭示温拌剂Sasobit对SBS改性沥青性能的影响,本文分别进行了不同温拌剂含量沥青的三大指标、布氏粘度、粘温扫描、动态剪切流变和低温弯曲流变等试验。结果表明:Sasobit使SBS沥青软化点降低,虽然其温度敏感性增大,但对针入度和延度影响不大。温拌沥青在105℃以上高温区粘度明显下降,这对施工有利;但随温度的降低,粘度却比原样提高,这对实际使用有利。依据三大指标和粘度试验结果,本文提出SBS沥青的Sasobit最佳掺量为3%。粘温扫描曲线显示,含Sasobit沥青粘度增大,特别是在75℃以下的温度区域,这对夏季抗车辙有利。此外,温拌剂Sasobit使SBS沥青的PG分级的高温等级提高,而对低温等级影响不大。     

光纤中基于双宽带抽运的受激布里渊散射增益谱展宽及慢光传输中脉冲失真减小的理论研究

分析了单模光纤中双宽带抽运的受激布里渊散射 （stimulated Brillouin scattering,SBS） 光速减慢效应.模拟了两高斯型宽带抽运光同时作用下的SBS增益谱和损耗谱,提出了一种获得均匀增益谱的方法.由于较强抽运光增益谱的中心频率与较弱抽运光损耗谱的中心频率相重合,通过调节较弱抽运光的功率和谱宽,能够部分地抵消掉较强增益谱的顶部从而构建出平坦的增益谱.研究了该平顶增益情形下信号脉冲畸变的性质.与单宽带抽运下脉冲畸变的对比表明,这种产生平顶增益谱的方法能有效地减小脉冲畸变. 关键词： 慢光 受激布里渊散射（SBS） 单模光纤 脉冲失真     

Visible details of the period-eight cycle route to chaotic process based on stimulated Brillouin scattering

A period-eight cycle route to chaos has been observed in a stimulated Brillouin scattering (SBS) system for the first time. Since the observation of fine periodic-orbit structure in very short dynamical region of chaotic domain is very difficult, in this work, we design a novel experiment to extend the chaotic domain by injecting light to the end of fiber and adjusting the proportion of stimulated Brillouin backscattering power and pump power, the present result shows the period-eight cycle route to chaotic laser process as well as more details of chaos. Simulations of the route to chaos are also presented.     

百纳秒级单频脉冲光纤激光极限功率的数值分析

建立了百纳秒级单频脉冲光纤激光极限输出功率的理论模型,分析了影响Yb3+掺杂的硅玻璃光纤和磷酸盐光纤最大输出功率的影响因素,计算结果表明影响硅玻璃光纤极限输出功率的因素有抽运光亮度、透镜效应和受激布里渊散射(SBS)效应,而对于磷酸盐光纤除了上述三种因素外还包括纤芯的熔化。在单频脉冲极限输出功率方面磷酸盐光纤的性能要优于硅玻璃光纤。     

交联聚苯乙烯-丁二烯-苯乙烯双极膜的制备及其在电合成环氧丁二酸中的应用

以聚苯乙烯-丁二烯-苯乙烯（SBS）嵌段共聚物作为基膜材料,采用自由基接枝聚合反应,在SBS主链上引入丙烯酸（AA）、苯乙烯磺酸和γ-甲基丙烯酰氧基丙基三甲氧基硅烷（KH570）链段作为阳离子交换膜;引入丙烯酸二甲基胺基乙酯和KH570链段作阴离子交换膜,阴、阳离子交换膜经KH570结构中三甲氧基硅烷基团的水解缩合,得到含硅氧交联网的SBS接枝离子交换膜,用流延法制备了SBS双极膜。 测得SBS阴膜和阳膜的吸水率分别为63.9%和72.8%,SBS阴膜和阳膜的离子交换容量分别为1.51和2.71 mmol/g。 将SBS双极膜作为阴阳两室隔膜,采用钨酸钠/过钨酸钠体系由阴极间接电氧化合成了环氧丁二酸。 结果表明,以石墨为阴、阳电极,电流密度为2.0×10-2 A/cm²、50 ℃反应4 h,环氧丁二酸的产率为53.0%,电流效率为40.8%。