The nature of phase separation in binary oxide melts and glasses. III. Borate and germanate systems

A review of immiscibility data in binary borate and germanate systems was performed in order to compare miscibility gap consolute temperatures with ionic potentials and radii of their associated cations. The trends obtained demonstrate that a selective solution mechanism similar to the one identified for the binary silicate systems is present in the borate and germanate binaries. More importantly, the borate and germanate immiscibility data permitted the identification of a new group of cations depicting an immiscibility behaviour different from the ones identified in binary silicate systems. The new group involves highly polarizable cations possessing a lone pair of electrons. This lone pair of electrons together with oxygen bonded by strong covalent bonds to modifier cations provides efficient shielding to the cations' nuclei which considerably reduces the coulombic repulsions and produces miscibility gaps with very low consolute temperatures. A new group of cations having an homogenizing effect on melts (i.e. a capacity to make immiscible melts single phase) is thus reported. Experimental and spectroscopic data suggest that miscibility gaps associated with cations having a lone pair of electrons exist in binary silicate systems such as TlO_1/2-SiO₂, PbO-SiO₂, SnO-SiO₂ and Bi₂O₃-SiO₂. The consolute temperature of their miscibility gaps is expected to be relatively low and metastable.     

混合序列加权和的完全收敛性和强收敛性

讨论了 ρ混合序列加权和的完全收敛性和强收敛性 ,推广了Stout和Thrum定理     

Full-Wave Analyses for a Multi-Layered Microstrip Patch Antenna

This paper describes numerical modelling of a dual band multi-layered microstrip patch antenna operating at 35GHz on an in-house semi-insulating GaAs substrate. The simulated and measured resonant frequencies at both lower and upper resonant frequencies will be compared to check the accuracy of the different numerical modelling techniques.     

Non-trivial simple poles at negative integers and mass concentration at singularity

Let (X,0) be the germ of a normal space of dimension n+1 and let f be the germ at 0 of a holomorphic function on X. Assume both X and f have an isolated singularity at 0. Denote by J the image of the restriction map , where F is the Milnor fibre of f at 0. We prove that the canonical Hermitian form on , given by poles of order at in the meromorphic extension of , passes to the quotient by J and is non-degenerate on . We show that any non-zero element in J produces a “mass concentration” at the singularity which is related to a simple pole concentrated at for (in a non-na?ve sense). We conclude with an application to the asymptotic expansion of oscillatory integrals , for , when . Received: 28 May 2001 / Published online: 26 April 2002     

Finite Abelian actions on surfaces

Edmonds showed that two free orientation preserving smooth actions φ₁ and φ₂ of a finite Abelian group G on a closed connected oriented smooth surface M are equivalent by an equivariant orientation preserving diffeomorphism iff they have the same bordism class [M,φ₁]=[M,φ₂] in the oriented bordism group Ω₂(G) of the group G. In this paper, we compute the bordism class [M,φ] for any such action of G on M and we determine for a given M, the bordism classes in Ω₂(G) that are representable by such actions of G on M. This will enable us to obtain a formula for the number of inequivalent such actions of G on M. We also determine the “weak” equivalence classes of such actions of G on M when all the p-Sylow subgroups of G are homocyclic (i.e. of the form n(Z/pαZ)).     

Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

Smaller Output Beam Divergence in the Slowly Opened Q-Switch Operation

The mechanism of the slowly opened Q-switch operation was investigated thoroughly. Maximum energy extraction from the resonator could be optimized, and the smallest output beam divergence could be achieved. In this article, we present a detailed analysis that has numerically verified the mode-selection mechanism in the slowly opened Q-switch operation, and the degree of the smaller output laser beam divergence that has been achieved. The mechanism of the slowly opened Q-switch operation is the inherent advantage of the passive saturable absorber in this operation. We can use the maximum energy extraction and the smallest output beam divergence results of the slowly opened Q-switch operation to design and optimize various passive saturable absorbers: plastic dye sheets, LiF:F₂⁻ color center crystals, Cr4⁺: YAG crystals, RG1000 color glass filters, and the single crystal semiconductor saturable absorber wafers that are in developed in our microchip laser systems.     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Polymer electrolyte membranes for the direct methanol fuel cell: A review

The direct methanol fuel cell (DMFC) has the potential to replace lithium‐ion rechargeable batteries in portable electronic devices, but currently experiences significant power density and efficiency losses due to high methanol crossover through polymer electrolyte membranes (PEMs). Numerous publications document the synthesis and characterization of new PEMs for the DMFC. This article reviews this research, transport phenomena in PEMs, and experimental techniques used to evaluate new PEMs for the DMFC. Although many PEMs do not show significant improvements over Nafion®, the benchmark PEM in DMFCs, experimental results show that several new PEMs exhibit lower methanol crossover at similar proton conductivities and/or higher DMFC power densities. These results and recommendations for future research are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Parts B: Polym Phys 44: 2201–2225, 2006     

Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability

The life of proton exchange membrane fuel cells (PEMFC) is currently limited by the mechanical endurance of polymer electrolyte membranes and membrane electrode assemblies (MEAs). In this paper, the authors report recent experimental and modeling work toward understanding the mechanisms of delayed mechanical failures of polymer electrolyte membranes and MEAs under relevant PEMFC operating conditions. Mechanical breach of membranes/MEAs in the form of pinholes and tears has been frequently observed after long‐term or accelerated testing of PEMFC cells/stacks. Catastrophic failure of cell/stack due to rapid gas crossover shortly follows the mechanical breach. Ex situ mechanical characterizations were performed on MEAs after being subjected to the accelerated chemical aging and relative humidity (RH) cycling tests. The results showed significant reduction of MEA ductility manifested as drastically reduced strain‐to‐failure of the chemically aged and RH‐cycled MEAs. Postmortem analysis revealed the formation and growth of mechanical defects such as cracks and crazing in the membranes and MEAs. A finite element model was used to estimate stress/strain states of an edge‐constrained MEA under rapid RH variations. Damage metrics for accelerated testing and life prediction of PEMFCs are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2346–2357, 2006