Preparation of indium sulfide thin films by spray pyrolysis using a new precursor indium nitrate

Indium nitrate and thiourea were used as the precursor solutions for preparing indium sulfide thin films using Chemical Spray Pyrolysis (CSP) technique. Films having various In/S ratios were characterized using X-Ray Diffraction (XRD), Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), optical absorption, transmission and photosensitivity measurements. Sample having In/S ratio 2/3 showed better crystallinity with band gap 2.66 eV. Depth profile of the sample also indicated the formation of indium sulfide. It was also observed that In/S ratio in the initial precursor solution determined the composition as well as electrical properties of the films. Maximum photosensitivity was observed for the sample prepared using solution having In/S ratio 2/4.     

Analysis of microcystins by capillary zone electrophoresis coupling with electrospray ionization mass spectrometry

In this paper, a rapid and effective method based on capillary zone electrophoresis (CZE) coupled with electrospray ionization mass spectrometry (ESI-MS) was established for the trace analysis of microcystin (MC) isomers in crude algae sample. The experimental conditions including the composition, acidity and concentration of buffer, separation voltage, injection time, and MS detection parameters were investigated in detail. A capillary separation system was as follows: a uncoated fused-silica capillary tube (50 μm i.d. × 90 cm), 40 mmol L⁻¹ ammonium acetate solution (pH 9.86) as running buffer, 25 kV as separation voltage, 20 kV × 3 s water first and 20 kV × 20 s for sample injection. Mass analysis was performed in ESI source, with sheath gas temperature 150 °C, sheath gas pressure 10 psi, and sheath gas flow 6 L min⁻¹. And sheath liquid was 7.5 mmol L⁻¹ acetic acid in 50% isopropanol-water (3 μL min⁻¹). Protonation and ammonium adduct molecular ions m/z 506.9 (MC-LR) and 532.0 (MC-YR) were used for the quantification of MCs. Under these conditions, two MCs were baseline separated within 9 min, the calibration curves were obtained in the range of 0.11-10.0 μg mL⁻¹ and 0.16-10.5 μg mL⁻¹ for MC-LR and MC-YR, respectively. Meanwhile, limits of detection were 0.05 and 0.08 μg mL⁻¹ for MC-LR and MC-YR, respectively. The recoveries for the two MCs were in the range of 95.8-108%. The developed approach had been successfully applied to the analysis of MCs in crude algae samples.     

Photocatalytic and superhydrophilicity properties of N-doped TiO2 nanothin films

Pure TiO₂ and nitrogen doped titanium dioxide (N-TiO₂) thin films were prepared by sol-gel method through spin coating on soda lime glass substrates. TiCl₄ and urea were used as Ti and N sources in the sol. XRD results showed nitrogen doping has retarded anatase to rutile phase transformation. The doping also leads to a decrease in roughness of the samples from 4 nm (TiO₂) to 1 nm (N-TiO₂). However, surface analysis by statistical methods reveals that both surfaces have self-affine structure. Optical band gap of thin films was shifted from 3.65 eV (TiO₂) to 3.47 eV (N-TiO₂). Hydrophilic conversion and photocatalytic degradation properties of thin films were investigated and exhibited that N-TiO₂ thin film has more preferable hydrophilicity and photocatalytic properties under UV illumination.     

Surface of Zn-Mn-O and its role in room temperature ferromagnetism: An XPS analysis

The existence of ferromagnetism in Zn-Mn-O semiconductor samples and dependence on the preparation condition were investigated. We systematically examined the samples with manganese concentration ranging from 0 to 10 at.%, prepared by a solid state reaction route using (ZnC₂O₄·2H₂O)_1−x and (MnC₂O₄·2H₂O)_x as precursors. Thermal treatment was carried out in air at temperatures ranging from 400 to 900 °C. The samples were investigated by X-ray diffraction, transmission electron microscopy, magnetization measurements and XPS spectroscopy. XPS surface composition, chemical analysis and depth profiling were successfully employed on powder revealing the chemical composition at the surface of the grains and underneath. The present investigation suggests that physical properties and observed room temperature ferromagnetism might be due to grain surface effects. It seems that the ferromagnetic phase is correlated with oxygen build up at the surface.     

About the influence of friction and polydispersity on the jamming behavior of bead assemblies

We study the jamming of bead assemblies placed in a cylindrical container whose bottom is pierced with a circular hole. Their jamming behavior is quantified here by the median jamming diameter, that is the diameter of the hole for which the jamming probability is 0.5. Median jamming diameters of monodisperse assemblies are obtained numerically using the Distinct Element Method and experimentally with steel beads. We obtain good agreement between numerical and experimental results. The influence of friction is then investigated. In particular, the formation of concentric bead rings is observed for low frictions. We identify this phenomenon as a boundary effect and study its influence on jamming. Relying on measures obtained from simulation runs, the median jamming diameter of bidisperse bead assemblies is finally found to depend only on the volume-average diameter of their constituting beads. We formulate this as a tentative law and validate it using bidisperse assemblies of steel beads.     

Enantioseparation of dansyl amino acids and dipeptides by chiral ligand exchange capillary electrophoresis based on Zn(II)-l-hydroxyproline complexes coordinating with γ-cyclodextrins

A chiral ligand exchange capillary electrophoresis (CLE-CE) method using Zn(II) as the central ion and l-4-hydroxyproline as the chiral ligand coordinating with γ-cyclodextrin (γ-CD) was developed for the enantioseparation of amino acids (AAs) and dipeptides. The effects of various separation parameters, including the pH of the running buffer, the ratio of Zn(II) to l-4-hydroxyproline, the concentration of complexes and cyclodextrins (CDs) were systematically investigated. After optimization, it has been found that eight pairs of labeled AAs and six pairs of labeled dipeptides could be baseline-separated with a running electrolyte of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM Zn(II), 6.0 mM l-hydroxyproline and 4.0 mM γ-CD at pH 8.2. The quantitation of AAs and dipeptides was conducted and good linearity (r² ≥ 0.997) and favorable repeatability (RSD ≤ 3.6%) were obtained. Furthermore, the proposed method was applied in determining the enantiomeric purity of AAs and dipeptides. Meanwhile, the possible enantiorecognition mechanism based on the synergistic effect of chiral metal complexes and γ-CD was explored and discussed briefly.     

Binding of thermo-sensitive and pH-sensitive butylated poly(allylamine)s with lysozyme

Butyl modified poly(allylamine)s with butyl substitution degrees of 15%to 70%were prepared.The polymers show pH sensitive property and lower critical solution temperature(LCST)behavior.The LCST appears at lower temperature,lower pH and lower polymer concentration for the polymer with higher butylated degree.The binding of native lysozyme with the polymers depends on the hydrophobicity of the polymers at the pH range that the protein and the polymer carry the same positive charges.The increase of polymer hydrophobicity can increase the binding with lysozyme,but the self-aggregation of the polymer decreases the binding.The bound lysozyme molecules can recover their native activity completely after the dissociation of the complexes.Compared with native lysozyme,the denatured one which exposes the hydrophobic residues can increase the binding with the polymer and form stable complex nanoparticles.     

Influence of isomorphous substitution in MFI-type materials on the diffusion of n-hexane: Molecular dynamic studies

Theoretical studies of the behaviour of an adsorption system MFI/n-hexane were performed with a molecular dynamic method. Investigation of influence of isomorphous substitution on diffusion coefficients was the main objective. It was found that the presence of metals other than silicon in the zeolite framework might cause an increase in the diffusion coefficients. However, it is small, independently of the adsorption level.     

The effect of counterions on the chain conformation of polyelectrolytes,as assessed by extensibility in elongational flow: The influence of multiple valency

An elongational flow technique was used to determine the effect of counterions on the chain conformation of polyelectrolyte molecules in solution, by means of the extensibility of the chains in the flow field. It is demonstrated that adding excess cations of seven low molecular weight salts, NaCl, CaCl₂, BaCl₂, SrCl₂, MgCl₂, AlCl₃, and SnCl₄, to a very dilute solution of fully sulphonated polystyrene (NaPSS) reduces the extensibility of the chains, that is, the facility by which a chain can be extended to varying degrees, an effect associated with chain contractions. In the case of multivalent counterions, these contractions, which with monovalent counterions are primarily due to screening of charges by excess counterions, are greatly enhanced, which we attribute to the formation of intramolecular ionic bridges. When, in the case of multivalent counterions, the polymer concentration is increased, in inversion of the effect, namely increase in chain extensibility on addition of ions, is observed. We attribute this latter effect to the ionic bridges becoming increasingly intermolecular, leading to effectively large molecules, and eventually to a gel. All these effects were accentuated with increase in valency. They could also be accompanied by precipitation which were of two kinds: one due to formation of insoluble ionic associations and a second attributable to enhanced hydrophobic interaction within the contracted chain itself. © 1994 John Wiley & Sons, Inc.     

Synthesis, field emission and glucose-sensing characteristics of nanostructural ZnO on free-standing carbon nanotubes films

Free-standing multiwall carbon nanotubes (MWNTs) films were coated, using chemical vapor deposition method, with a thin layer of nanostructural ZnO. The morphology and crystal structure of the as-grown products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman scattering analyses. Field emission (FE) results demonstrated that the needle-like and spherical ZnO-MWNTs composite structure films possessed good performance with a turn-on field of 1.3, 2.2 V μm⁻¹ and a threshold field of 2.6, 4.5 V μm⁻¹, respectively. The glucose-sensing characteristic has also been studied. The multi-layer electrode (PDDA/GOx/ZnO/MWNTs) exhibited significant electrocatalysis to the oxidation and reduction of H₂O₂ than the PDDA/GOx/MWNTs electrode, which provided wide potential applications in clinical, environmental, and food analysis.