ENVIRONMENTAL STABILITY OF THE POLYENE PREPARED BY DEHYDROCHLORINATION OF POLY(VINYL CHLORIDE)

A high-quality polyene can be obtained by exensive dehydrochlorination of poly(vinyl chloride) (PVC) in aliquid/solid two-phase system. The liquid phase is a tetrahydrofuran solution of PVC containing a small amount ofpoly(ethylene glycol) with molar mass of 400 g as a phase transfer catalys. The solid phase is potassium hydroxide particles.The structure of the polyene is polyacetylene-like and has a long conjugated C=C sequence and a narrow dispersity ofpolyene sequences according to its FT-infrared and Raman spectra. The environmental stability of the polyene was alsostudied by IR, Raman spectra and elemental analysis. Experimental results demonstrated that the polyene was susceptible toair and could be changed into a material containing high concentrations of hydroxyl and carbonyl groups. The polyenesequences were shortened and its dispersity became broader due to the effect of dioxygen.     

Structure of the blue forms of bisphthalocyanines of rare-earth elements

Using electron spectroscopy, X-ray photoelectron spectroscopy, and ESR spectroscopy, the blue forms of bisphthalocyanines of rare-earth elements were found to have structures of sandwich-type complexes with isoelectronic phthalocyanine ligands linked with tetravalent metal ions, [Pc^2–Ln⁴⁺Pc^2–]⁰. A comparative spectral and electrochemical study of the blue and green forms oftert-butyl-substituted bisphthalocyanines was carried out for almost the whole series of rare-earth metals. Lutetium octa(perfluoro-tert-butyl)- and perchlorobisphthalocyanines were synthesized for the first time.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 425–430, March, 1995.This study was financially supported by the Russian Foundation for Basic Research (grant No. 94-03-08903).     

One-phase supported titanium-based catalysts for polymerization of ethylene. III. ESR spectra of the ternary system Sio2—R3Al—TiCl4

The ternary catalyst systems based on activated silica, aluminum alkyl, and titanium tetrachloride were polymerized in an ethylene gas-phase polymerization process, and further studied using ESR spectroscopy. Two types of titanium (III) ESR-active centers were observed and a linear dependence between the concentration of that characterized by a rhombic anisotropic signal with g₁ = 1.962, g₂ = 1.945, and g₃ = 1.913 values and catalyst productivity was found. © 1993 John Wiley & Sons, Inc.     

有机锗氨基酸酯类系列化合物的快原子轰击质谱规律

为增强有机锗化合物的生物活性，合成了一系列有机锗氨基酸酯类倍半氧化物，并重点研究了它们的快原子轰击质谱（ＦＡＢＭＳ）。研究结果表明：该系列化合物的各碎片离子峰与其组成及结构均有很好的对应关系及很强的规律性     

Bis(crown-6)calix[4]arene/Cs+ Coordination Chemistry in NPME Solution

NMR spectroscopy was used to show that the symmetry of the crown ether bis(C6) is increased by an increase of the alkali metal cation radius. The EXAFS spectrum demonstrates that a seven oxygen atom coordinated configuration is present in the bis(C6)/Cs⁺/NPME system, where NPME denotes o-nitrophenylmethyl ether. The seventh oxygen in this complex, besides the six crown ether oxygens of bis(C6), may come either from a H₂O molecule or an NO₃⁻ ion.     

Direct and simultaneous voltammetric analysis of heavy metals in tap water samples at Assiut city: an approach to improve the analysis time for nickel and cobalt determination at mercury film electrode

Tap water samples (Assiut city, lie in the middle north of upper Egypt, approx. 370 km from Cairo, January-March, 2002) were taken from the eight sampling sites of different locations at Assiut city. The samples are analyzed to determine the total content of cadmium, copper, lead and zinc by differential pulse anodic stripping voltammetry (DPASV) while nickel and cobalt are determined by a new simple differential pulse adsorptive stripping voltammetry (DPAdSV), using dimethylglyoxime (DMG) as the complexing agent. This method uses sodium sulfite as the supporting electrolyte, which facilitates the removal of oxygen interference without the traditional necessity of purging with inert gas. The effect of various parameters was studied using DPASV (for Cd, Pb, Cu and Zn) and AdSV (for Ni and Co) methods. Subsequently, under the so found experimental conditions, the stability of calibration curves and the detection limits (μg/l) have been determined. The data achieved (for all metals utility) are comparable to those measured by the graphite furnace atomic absorption spectrophotometric (GF-AAS) method. The effects of the interferences between these metal ions have been investigated. Moreover, the effect of storage was discussed and the obtained results were compared favorably with standard official methods. Statistical analysis of the database exhibits applicability and the accuracy of the techniques. The results obtained from the two techniques (Voltammetry and GF-AAS) are in very good agreements in the most tap water samples.     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

Time‐resolved Fourier transform infrared/attenuated total reflection spectroscopy for the measurement of molecular diffusion in polymers

Over the past 2 decades, the use of time‐resolved Fourier transform infrared/attenuated total reflection (ATR) spectroscopy for the measurement of diffusion in polymers has grown. ATR is a powerful technique for the measurement of diffusion in polymers because it is an in situ technique that is relatively inexpensive, provides reliable short‐time data, and provides a wealth of information at the molecular level. This article highlights the technique and its application to numerous studies, ranging from the diffusion of drugs in human skin to chemical warfare agents in barrier materials. In addition to these topics, recent studies with ATR to quantify and model molecular interactions during the diffusion process are reviewed. In the future, the ATR technique may have an impact on a variety of emerging fields in which diffusion in polymers plays an important role, such as fuel cells, membrane separation, sensors, and drug delivery. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2794–2807, 2003     

Spin crossover in polyaniline

Solutions of the basic form of polyaniline in m-cresol were studied by ESR and optical spectroscopy in the visible region. m-Cresol can slowly (during one month) protonate polyaniline. For the first time characteristic features of spin crossover were found: sharp changes in the magnetic susceptibility and the ESR line width of polyaniline at ∼200 and 250 K, a smooth decrease in the susceptibility and absorption with the temperature increase from 293 to 423 K, and the temperature hysteresis. The temperature-induced structural rearrangements of polyaniline are caused, most likely, by singlet-triplet transitions in relatively short sections of the polymer chain. The model of short sections permits to explain the origin of the temperature-independent part of susceptibility. Quantum-chemical calculations for the aniline dimers and tetramers describe correctly the singlet-triplet splitting value, thermochromism, and HFS constants in the spectrum of polyaniline. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1959–1966, October, 2007.     

A two-dimensional infrared correlation spectroscopic study on the thermal degradation of poly(2-hydroxyethyl acrylate)-co-methyl methacrylate/SiO2 nanohybrids

Two-dimensional infrared (2D IR) correlation spectroscopy was applied to study the structural changes occurring in the decomposition of PHEA-co-MMA/SiO₂. Complicated absorption spectral changes were observed in the heating process. 2D IR analysis indicates that during heating, covalent bonds, (Si-O-C), between the polymer and the inorganic moiety were formed, which was the main factor in the improvement in thermal properties of the hybrids such as the decomposition temperatures (T_d). The thermal stability of the hybrids was also studied by solid-state ²⁹Si MAS NMR spectroscopy and TGA tests. Their results complemented each other well.