基于分子参数的药物小肠吸收预测模型

选择100个化合物作为数据集,随机选取其中80个为训练集,其他分子为验证集,并为每个化合物分子计算了30个参数.通过采用五种不同多元线性回归分析方法对其训练模拟,建立了数学模型,并用验证集检验了所建模型的预测能力.结果发现向后筛选法为最优小肠吸收建模方法.由该法所建模型的统计结果良好(R2>0.80),应用于验证集时也表现出较强预测能力.该模型确定了对小肠吸收影响较大的分子参数,有助于指导进一步的新药筛选和开发.     

A computer program for searching the best model for describing different experimental systems

An algorithm for searching the best polynomial analytical function for describing different experimental systems is presented. It is based

1. (1)on the generation of all possible analytical functions of a given order, with a given number of terms and with a given number of independent variables, and

2. (2)on the calculation of the parameters of all selected functions using the linear regression method.

To show the ability of the program two different examples are given:

1. (1) searching the best univariate polynomial model, and

2. (2) modelling of the stability of a two-component mixture as a function of three factors.

主成分回归-紫外光度法同时测定食用香料麦芽酚和乙基麦芽酚

报道了一种快速、简便的同时测定食用香料麦芽酚、乙基麦芽酚光度法,方法基于在pH2.87的B R缓冲溶液中对麦芽酚和乙基麦芽酚两组分混合溶液进行光度测定,所得的重叠波谱数据用主成分回归法(PCR)、经典最小二乘法(CLS)和偏最小二乘法(PLS)等化学计量学方法进行处理,结果表明主成分回归法(PCR)的预报误差最小。对样品进行测定,获得了较好的定量分析结果。麦芽酚和乙基麦芽酚的线性范围均为1.0～20.0mg·L-1;检出限分别为0.4347和0 5589mg·L-1。     

Combining synchronous fluorescence spectroscopy with multivariate methods for the analysis of petrol-kerosene mixtures

Synchronous fluorescence spectroscopy (SFS) is a rapid, sensitive and nondestructive method suitable for the analysis of multifluorophoric mixtures. The present study demonstrates the use of SFS and multivariate methods for the analysis of petroleum products which is a complex mixture of multiple fluorophores. Two multivariate techniques principal component regression (PCR) and partial least square regression (PLSR) have been successfully applied for the classification of petrol-kerosene mixtures. Calibration models were constructed using 35 samples and their validation was carried out with varying composition of petrol and kerosene in the calibration range. The results showed that the method could be used for the estimation of kerosene in kerosene-mixed petrol. The model was found to be sensitive, detecting even 1% contamination of kerosene in petrol.     

Simultaneous spectrophotometric determination of ethinylestradiol and levonorgestrel by partial least squares and principal component regression multivariate calibration

Two spectrophotometric methods for the determination of Ethinylestradiol (ETE) and Levonorgestrel (LEV) by using the multivariate calibration technique of partial least square (PLS) and principal component regression (PCR) are presented. In this study the PLS and PCR are successfully applied to quantify both hormones using the information contained in the absorption spectra of appropriate solutions. In order to do this, a calibration set of standard samples composed of different mixtures of both compounds has been designed. The results found by application of the PLS and PCR methods to the simultaneous determination of mixtures, containing 4–11 μg ml⁻¹ of ETE and 2–23 μg ml⁻¹ of LEV, are reported. Five different oral contraceptives were analyzed and the results were very similar to that obtained by a reference liquid Chromatographic method.     

Simultaneous Kinetic‐Spectrophotometric Determination of Hydrazine and its Derivatives by Partial Least Squares and Principle Component Regression Methods

Simultaneous kinetic‐spectrophotometric determination of a ternary mixture of hydrazine (HZ) and its derivatives by principal component regression (PCR) and partial least squares (PLS) calibration is described. The methods were based on the difference observed in the reduction rate of iron(III) with HZ, thiosemicarbazide (TSCZ) and phenylhydrazine (PHZ) in the presence of 2,2′‐bipyridine (Bpy). The colored complex of [Fe(Bpy)₃]²⁺ was formed in sodium dodecyl sulfate (SDS) as micellar media, and then monitored at 520 nm. The results showed that simultaneous determination of HZ, TSCZ and PHZ could be performed in their concentration ranges of 1.0–70.0, 0.2–6.0 and 0.1–10.0 μg mL^?1, respectively. The root mean squares errors of prediction (RMSEP) of HZ, TSCZ and PHZ were 0.719, 0.164 and 0.105 (for PLS) 0.788, 0.166 and 0.993 (for PCR), respectively. Both methods (PCR and PLS) were validated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ, TSCZ and PHZ in water samples.     

Multivariate calibration techniques applied to the spectrophotometric analysis of one-to-four component systems

The UV spectrophotometric analysis of a multicomponent mixture containing paracetamol, caffeine, tripelenamine and salicylamide by using multivariate calibration methods, such as principal component regression (PCR) and partial least-squares regression (PLS), was described. The calibration set was based on 47 reference samples, consisting of quaternary, ternary, binary and single-component mixtures, with the aim to develop models able to predict the concentrations of unknown samples containing as many as one-to-four components. The calibration models were optimized by an appropriate selection of the number of factors as well as wavelength ranges to be used for building up the data matrix and excluding any information about the interfering excipients included in pharmaceutics. The PCR and PLS models were compared and their predictive performance was inferred by a successful application to the assays of synthetic mixtures and pharmaceutical formulations.     

Modelling the thermal behaviour of carboxylic acid derivatives with cylcodextrins in the solid-state

The application of classical QSAR and molecular modelling to the inclusion complexation of natural and modified cyclodextrins (CDs) with carboxylic acid derivatives as guest molecules was examined. Information was available on the thermal behaviour, in the solid-state of benzoic acid (BA), salicylic acid (SA), and various substituted aminosalicylic acids (3-aminosalicylic acid, 3-ASA, 4-aminosalicylic acid, 4-ASA and 5-aminosalicylic acid, 5-ASA), as well as on the thermal behaviour of 1:1 molar ratio physical and kneaded mixtures of these acids with each of three different cyclodextrins, β-, (BCD) 2-hydroxypropyl-β-, (HPBCD) and γ-cyclodextrin (GCD). The thermal behaviour of the binary (1:1 stoichiometry) mixtures was modelled using stepwise multiple regression (SMR). Two models for the prediction of the percentage mass loss and enthalpy of dehydration of the physical mixtures were established with correlation coefficients (r) of 0.79 and 0.92, respectively. Decreased correlation in the thermal behaviour of kneaded mixtures indicated significant interaction and possible formation of inclusion complexes. This revised version was published online in July 2006 with corrections to the Cover Date.     

Autoignition temperature: comprehensive data analysis and predictive models

ABSTRACT

Here we report a new predictive model for autoignition temperature (AIT), an important physical parameter widely used to assess potential safety hazards of combustible materials. Available structure-AIT data extracted from different sources were critically analysed. Support vector regression (SVR) models on different data subsets were built in order to identify a reliable compound set on which a realistic model could be built. This led to a selection of the dataset containing 875 compounds annotated with AIT values. The thereupon-based SVR model performs reasonably well in cross-validation with the determination coefficient r ² = 0.77 and mean absolute error MAE = 37.8°C. External validation on 20 industrial compounds missing in the training set confirmed its good predictive power (MAE = 28.7°C).     

Measurement of lactate in whole human blood with near-infrared transmission spectroscopy

We have evaluated the potential of near-infrared spectroscopy (NIRS) as a technique for rapid analysis of lactate in whole blood. To test the NIRS technique, a comparison was made with a standard clinical method using whole blood samples taken from five exercising human subjects at three different stage of exercise. To expand lactate concentration within the physiological range, standard additions method was used to generate 45 unique data points. Spectra were collected over the 2050-2400 nm spectral range with a 1 mm optical path length quartz cell. Reference lactate concentrations in the samples were determined by enzymatic measurements. Estimates and calibration of the lactate concentration with NIRS was made using partial least squares (PLS) regression analysis and leave-N-out cross validation on second derivative spectra. Separate calibrations were determined from each of the subject samples and cumulative PRESS was used to determine the number of PLS factors in the final model. The results from the PLS model presented are generated from the five individual calibration coefficient vectors and provided a correlation coefficient of 0.978 and a standard error of cross validation of 0.65 mmol l⁻¹ between the enzymatic assay and the NIRS technique. To study the parameters that impact the spectra baseline and the correlation between the calculated model and the data, referenced measurements of lactate against baseline spectrum were made for each individual. A correlation coefficient of 0.992 and a standard error of cross validation of 0.21 mmol l⁻¹ were found. The results suggest that NIRS may provide a valuable tool to assess physiological status for both research and clinical needs.