Minimum concave cost production system: A further generalization of multi-echelon model

We will consider a concave minimization problem associated with a series production system in which raw material is processed inm consecutive facilities. The products at some facility are either sent to the next facility or stocked in the warehouse. The amount of demand for the final products during periodi, i = 1,,n, are known in advance. Our problem is to minimize the sum of processing, holding and backlogging cost, all of which are assumed to be concave.The origin of this model is the classical economic lot size problem of Wagner and Whitin and was extensively studied by Zangwill. This model is very important from the theoretical as well as practical point of view and this is one of the very rare instances in which polynomial time algorithm has been constructed for concave minimization problems.The purpose of this paper is to extend the model further to the situation in which time lag is associated with processing at each facility. We will propose an efficient O(n ⁴ m) algorithm for this class of problems.     

Stochastic flows on a countable set: Convergence in distribution

Consider a sequenceF ₁,F ₂,... of i.i.d. random transformations from a countable setV toV. Such a sequence describes a discrete-time stochastic flow onV, in which the position at timen of a particle that started at sitex isM _n(x), whereM _n =F _n F _n–1 F ₁. We give conditions on the law ofF ₁ for the sequence (M _n) to be tight, and describe the possible limiting law. an example called the block charge model is introduced. The results can be formulated as a statement about the convergence in distribution of products of infinite-dimensional random stochastic matrices. In practical terms, they describe the possible equilibria for random motions of systems of particles on a countable set, without births or deaths, where each site may be occupied by any number of particles, and all particles at a particular site move together.     

Turbulence without strange attractor

It is shown that pipe-flow turbulence consists of transients. The fractal dimensions of the dynamical process are thus all zero. Nevertheless, this is compatible with Grassberger-Procaccia analyses suggesting the existence of a high-dimensional strange attractor. The usefulness of the Grassberger-Procaccia method to detect the aging of transients is demonstrated.     

气-固流化床反应器内双流体力学模型及其验证 Ⅱ.单组分两维射流床内流场特性分析

由以质量、动量和能量三大守恒定律为基础的湍流两相流理论出发,建立了描述气固流化床内两相流动的数学模型;在微型计算机上编写了相应的数值计算和图形处理程序;为了验证模型的可靠性,本文着手模拟与分析了单组分颗粒体系两维射流流化床内气、固相速度场、空隙度和压力场随时间、空间变化规律;得到了与前人实验结果相吻合的结论。     

流动注射-氢化物发生-原子吸收光谱法测定雪中的微量铅

建立了测定雪中微量铅的流动注射-氢化物发生-原子吸收光谱法。在优化条件下。测定铅的线性范围为0～52．0ng／mL，线性回归方程为A=0．018c 0．016，相关系数r=0．9995，检出限为0．2ng／mL。用于雪中微量铅的测定，加标回收率为94．2％～107．3％，相对标准偏差为1．47％～3．22％。该方法的测定结果与标准加入法基本一致。     

Properties of ITO films prepared by reactive magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by mid frequency pulsed dual magnetron sputtering using a metallic alloy target with 10 wt.% tin in an atmosphere of argon and oxygen. The aim of the work was to study the interdependence of structural, electrical and optical properties of ITO films deposited in the reactive and transition target mode, respectively. The deposition rate in the transition mode exceeds the deposition rate in the reactive mode by a factor of six, a maximum value of 100 nm·m min⁻¹ could be achieved. This corresponds to a static deposition rate of 200 nm min⁻¹. The lowest electrical resistivity of 1.1·10⁻³ Ω cm was measured at samples deposited in the high oxygen flow range in the transition mode. The samples show a good transparency in the visible range corresponding to extinction coefficients being below 10⁻². X-ray diffraction was used to characterise crystalline structure as well as film stress. ITO films prepared in the transition mode show a slightly preferred orientation in (211) direction, whereas films deposited in the reactive mode are strongly (222) oriented. Compared to undoped In₂O₃ all samples have an enlarged lattice. The lattice strain perpendicular to the surface is about 0.8% and 2.0% for films grown in the transition and the reactive mode, respectively. Deposition in the transition mode introduces a biaxial film stress in the range of −300 MPa, while stress in reactive mode samples is −1500 MPa.     

Quantitative study on selective stacking of zwitterions in large-volume sample matrix by moving reaction boundary in capillary electrophoresis

The paper advanced the theoretical procedures for quantitative design on selective stacking of zwitterions in full capillary sample matrix by a cathodic-direction moving reaction boundary (MRB) in capillary electrophoresis (CE) under control of electroosmotic flow (EOF). With the procedures, we conducted the theoretical computations on the selective stacking of two test analytes of L-histidine (His) and L-tryptophan (Trp) by the MRB created with 30 mM pH 3.0 formic acid-NaOH buffer and 2-80 mM sodium formate. The results revealed the following three predictions. At first, the MRB cannot stack His and Trp plugs if less than 12.5 mM sodium formate is used to form the MRB and prepare the sample matrix. Second, the MRB can stack His and/or Trp sample plugs completely if higher than 50 mM sodium formate is chosen to form the MRB. Third, the MRB can only focus His plug completely, but stack Trp plug partially if 20-50 mM sodium formate is used; this implied the complete MRB-induced selective stacking to His rather than Trp. All the three predictions were quantitatively proved by the experiments. With great dilution of sample matrix and control of EOF, controllable, simultaneous and MRB-induced selective stacking and separation of zwitterions were achieved. The theoretical results hold evident significances to the quantitative design of selective stacking conditions and the increase of detection sensitivity of zwitterions in CE. In addition, the control of EOF by cetyltrimethylammonium bromide (CTAB) can evidently improve the stacking efficiency to both His and Trp.     

Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.     

基于磁泳的生物分离分析技术

利用磁场诱导的微粒运动即磁泳对磁响应性粒子进行精细分离,是近年来发展起来的选择性分离细胞和高分子量核酸的有效技术。本文在阐明磁泳分离原理的基础上,介绍了磁泳分离的分流薄层分级技术、四极磁场流动分离技术和微芯片上的自由流磁泳分离技术的装置构造、工作原理及其在生物分离分析中的应用。     

Flow and Sequential Injection Manifolds for the Spectrophotometric Determination of Captopril Based on its Oxidation by Fe(III)

 Two new simple and rapid methods are reported for the accurate and precise spectrophotometric determination of captopril (CPL) using flow (FI) and sequential injection (SI) analysis. The methods are based on the fast oxidation of CPL by Fe(III). The produced Fe(II) reacts with 2,2′-dipyridyl-2-pyridylhydrazone (DPPH) in acidic medium to form a colored complex which is monitored spectrophotometrically at 535 nm. Both methods allow the determination of the analyte up to 1000 mg L⁻¹ at a sampling rate of 120 and 60 injections per hour for FI and SI, respectively. The methods are very precise [s _r=0.8 and 1.2% at 500 mg L⁻¹ CPL (n=12) for FI and SI, respectively] and the 3σ detection limits (c _L=4.0 and 7.0 mg L¹, respectively) are quite satisfactory. Their application to a variety of anti-hypertensive commercial pharmaceutical formulations showed excellent results (relative errors, e _r, < ± 1.6% in all cases compared to an official HPLC method), while common pharmaceutical excipients were found not to interfere. Recovery experiments further verified the accuracy of the developed methods, as the percent recoveries were in the range of 98.1–102.5%. Author for correspondence. E-mail: themelis@chem.auth.gr Received May 9, 2002; accepted January 8, 2003 Published online May 5, 2003