Methane production from synthesis gas using a mixed culture ofR. rubrum M. barkeri,and M. formicicum

The components of synthesis gas, CO, H₂, and CO₂, may be converted into CH₄ biologically through either acetate or H₂/CO₂ as intermediates. Of these two routes, conversion through H₂/CO₂ is preferred. This paper presents results of mixed-culture studies employing the photosynthetic bacteriumR. rubrum for converting CO to CO₂ and H₂ by the water gas shift reaction and two methanogens,M. formicicum andM. barkeri, for converting CO₂ and H₂ into CH₄. Results are presented for triculture operation in two types of reactors, the packed bubble column and the trickle-bed reactor.     

ICP-MS for elemental speciation studies

The use of inductively coupled plasma mass spectrometry (ICP-MS) coupled with separation techniques for the purpose of elemental speciation has recently gained a lot of attention. Much of this is due to ever improving separation capabilities of Chromatographic techniques, the high sensitivity of ICP-MS, and the continuing development of better interface techniques. Additionally, there is a growing awareness of the need to monitor various species of an analyte, rather than just total analyte concentrations, due to their often varying natures. For the sake of learning from different elemental speciation approaches, this review brings together some selected types of elemental speciation which have been recently seen in literature. These include separations using various forms of liquid chromatography, such as reversed phase, reversed phase ion pairing, micelle, ion exchange, and size exclusion. Elemental speciation employing gas Chromatographie separations and supercritical fluid separations are discussed as well as elemental speciation using capillary electrophoresis.     

Hydrate inclusion compounds

There are three general classes of hydrate inclusion compounds: the gas hydrates, the per-alkyl onium salt hydrates, and the alkylamine hydrates. The first are clathrates, the second are ionic inclusion compounds, the third are semi-clathrates. Crystallization occurs because the H₂O molecules, like SiO₂, can form three-dimensional four-connected nets. With water alone, these are the ices. In the inclusion hydrates, nets with larger voids are stabilized by including other guest molecules. Anions and hydrogen-bonding functional groups can replace water molecules in these nets, in which case the guest species are cations or hydrophobic moieties of organic molecules. The guest must satisfy two criteria. One is dimensional, to ensure a comfortable fit within the voids. The other is functional. The guest molecules cannot have either a single strong hydrogen-bonding group, such as an amide or a carboxylate, or a number of moderately strong hydrogen-bonding groups, as in a polyol or a carbohydrate.The common topological feature of these nets is the pentagonal dodecahedra: i.e., 5¹²-hedron. These are combined with 5¹²6²-hedra, 5¹²6³-hedra, 5¹²6⁴-hedra and combinations of these polyhedra, to from five known nets. Two of these are the well-known 12 and 17 Å cubic gas hydrate structures,Pm3n, Fd3m; one is tetragonal,P4 ₂/mnm, and two are hexagonal,P6 ₃/mmc andP6/mmm. The clathrate hydrates provide examples of the two cubic and the tetragonal structures. The alkyl onium salt hydrates have distorted versions of thePm3n cubic, the tetragonal, and one of the hexagonal structures. The alkylamine hydrate structures hitherto determined provide examples of distorted versions of the two hexagonal structures.There are also three hydrate inclusion structures, represented by single examples, which do not involve the 5¹²-hedra. These are 4(CH₃)₃CHNH₂·39H₂O which is a clathrate; HPF₆·6H₂O and (CH₃)₄NOH·5H₂O which are ionic-water inclusion hydrates. In the monoclinic 6(CH₃CH₂CH₂NH₂)·105H₂O and the orthorhombic 3(CH₂CH₂)₂NH·26H₂O, the water structure is more complex. The idealization of these nets in terms of the close-packing of semi-regular polyhedra becomes difficult and artificial. There is an approach towards the complexity of the water salt structures found in the crystals of proteins.     

Found in the Folds: A Rediscovery of Ancient Egyptian Pleated Textiles and the Analysis of Carbohydrate Coatings

Charles T. Currelly, first director of the Royal Ontario Museum, participated in excavations of the tomb of King Nebhepetre, now known as Mentuhotep II, (Dynasty XI) in Deir el-Bahri, Egypt in 1906. He brought to Canada many objects from the excavations, and objects that he purchased while in Egypt; these formed the initial collection of the museum. Among the objects were seven fragments of fine linen cloth with intricate pleat patterns. Recently, the cloths became the subject of a study to learn how they had retained their pleats for 4000 years. Samples were examined and analysed using polarised light microscopy, scanning electron microscopy-electron dispersive X-ray spectrometry, gas chromatography-mass spectrometry, and pyrolysis-gas chromatography-mass spectrometry. Three of the cloths were likely fragments of clothing re-purposed as bandages and were found to be saturated in mummification balms composed of Pinaceae resin, Pistacia resin, and an essential oil characterised by a high abundance of cedrol, possibly originating from a juniper species. All seven of the cloths were found to have traces of polysaccharides from two probable sources: an arabinogalactan gum such as gum arabic or a fruit gum, and a polyglucoside, possibly starch.     

Chemometric Analysis of Urinary Volatile Organic Compounds to Monitor the Efficacy of Pitavastatin Treatments on Mammary Tumor Progression over Time

Volatile organic compounds (VOCs) in urine are potential biomarkers of breast cancer. Previously, our group has investigated breast cancer through analysis of VOCs in mouse urine and identified a panel of VOCs with the ability to monitor tumor progression. However, an unanswered question is whether VOCs can be exploited similarly to monitor the efficacy of antitumor treatments over time. Herein, subsets of tumor-bearing mice were treated with pitavastatin at high (8 mg/kg) and low (4 mg/kg) concentrations, and urine was analyzed through solid-phase microextraction (SPME) coupled with gas chromatography-mass spectrometry (GC-MS). Previous investigations using X-ray and micro-CT analysis indicated pitavastatin administered at 8 mg/kg had a protective effect against mammary tumors, whereas 4 mg/kg treatments did not inhibit tumor-induced damage. VOCs from mice treated with pitavastatin were compared to the previously analyzed healthy controls and tumor-bearing mice using chemometric analyses, which revealed that mice treated with pitavastatin at high concentrations were significantly different than tumor-bearing untreated mice in the direction of healthy controls. Mice treated with low concentrations demonstrated significant differences relative to healthy controls and were reflective of tumor-bearing untreated mice. These results show that urinary VOCs can accurately and noninvasively predict the efficacy of pitavastatin treatments over time.     

USAEME-GC/MS Method for Easy and Sensitive Determination of Nine Bisphenol Analogues in Water and Wastewater

A new, simple and sensitive method for isolating nine compounds from the bisphenol group (analogues: A, B, C, E, F, G, Cl₂, Z, AP) based on one-step liquid–liquid microextraction with in situ acylation followed by gas chromatography-mass spectrometry was developed and validated using influent and effluent wastewaters. The chemometric approach based on the Taguchi method was used to optimize the main conditions of simultaneous extraction and derivatization. The recoveries of the proposed procedure ranged from 85 to 122%, and the repeatability expressed by the coefficient of variation did not exceed 8%. The method’s limits of detection were in the range of 0.4–64 ng/L, and the method’s limits of quantification ranged from 1.3 to 194 ng/L. The developed method was used to determine the presence of the tested compounds in wastewater from a municipal wastewater treatment plant located in northeastern Poland. From this sample, eight analytes were detected. Concentrations of bisphenol A of 400 ng/L in influent and 100 ng/L in effluent were recorded, whereas other bisphenols reached 67 and 50 ng/L for influent and effluent, respectively. The removal efficiency of bisphenol analogues in the tested wastewater treatment plant ranged from 7 to approximately 88%.     

孔梯度陶瓷纤维复合膜管的制备及特性

陶瓷过滤管具有孔隙率高、耐腐蚀、耐高温、机械强度高、便于清洗、使用寿命长等优点,是高温烟尘处理用的高效过滤元件.本文研制了一种具有梯度孔结构堇青石陶瓷纤维复合膜过滤元件,该过滤元件是由多孔支撑体、过渡层和分离膜层组成.其中支撑体、过渡层和分离层的气孔率分别为35～40;、50～60;和60～70;.文中主要分析了孔梯度陶瓷纤维复合膜管的材料结构和抗热震性能,同时对复合膜管进行含尘气体过滤的冷态模拟试验.对于烟气中粒径大于或等于0.1μm的颗粒,复合膜管的截留率达到99.8;以上.     

气粒混合物非灰辐射特性合并宽窄谱带K分布模型

气粒混合物辐射问题具有全场性、非灰性、耦合性等特点,准确预估高温燃气/粒子非灰辐射特性是非常重要的。本文将合并宽窄谱带K分布模础(CWNBCK)与离散坐标法(DOM)结合,开展了非灰气粒混合物辐射换热问题的模拟工作,分别验证了一维和三维情况下应用该模型的准确性,给出不同工况下的热流源项、壁面热流或辐射热流等。结果表明:该模型能够给出与SNB模型精度基本相同的结果,考虑其计算效率的提高,可以在工程实际中应用该模型计算非灰气粒混合物辐射换热。     

A model of melting of rare gases within bubbles of crystalline metal matrix

Abstract

On the basis of experimental results obtained in the present and some other works a model of melting of rare gas solids within bubbles formed in a crystalline metal matrix as a result of ion implantation is proposed. Rare gas solid is supposed to melt on heating at the expense of the bubble volume expansion by emission of a dislocation loop. On this basis the melting temperature can be estimated as one which is enough to provide for a pressure inside a bubble sufficient for the initiation of the dislocation loop punching. Values of melting temperatures obtained in this way are in good agreement with available experimental data.     

Book reviews

This work is a thorough investigation on the major operating parameters of the programmable temperature vaporisation (PTV) inlet used for gas chromatographic injection, including injection mode and volume, inlet temperature, vent and purge flow rates. The results clearly demonstrate the advantage of large volume injection in enhancing the detection of polybrominated diphenyl ethers (PBDEs). Partial loss of injected PBDEs occurred during solvent venting and due to incomplete sample transfer. Such loss was minimised by lowering the initial inlet temperature and vent flow and elevating the final inlet temperature. The results show that 50 mL/min vent flow, as low as 0°C initial and higher than 300°C final inlet temperatures produced the relatively high responses. Two mass spectrometric parameters were also evaluated. Indoor dust, lake sediment and human placenta tissue samples were analysed to demonstrate reliability and sensitivity improvement of the PTV large volume injection.