Additive assisted hydrothermal synthesis,characterization and optical properties of one dimensional DyPO4:Ce3+ nanostructures

One dimensional nanostructures of cerium doped dysprosium phosphate (DyPO₄:Ce³⁺) were synthesized via hydrothermal route in the presence of different surfactants [sodium dodecyl sulfate (SDS), dodecyl sulfosuccinate (DSS), polyvinyl pyrollidone (PVP)] and solvent [ethylene glycol and water]. The prepared nanostructures were characterized by Powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), UV-VIS-NIR absorption spectrophotometer and photoluminescence (PL) studies. The PXRD and FTIR results indicate purity, good crystallinity and effective doping of Ce³⁺ in nanostructures. SEM and TEM micrographs display nanorods, nanowires and nanobundles like morphology of DyPO₄:Ce³⁺. Energy-dispersive X-ray spectra (EDS) of DyPO₄:Ce³⁺nanostructures confirm the presence of dopant. UV-VIS-NIR absorption spectra of prepared compounds are used to calculate band gap and explore their optical properties. Luminescent properties of DyPO₄:Ce³⁺ was studied by using PL emission spectra. The effect of additives and solvents on the uniformity, morphology and optical properties of the nanostructures were studied in detail.     

Carbon dioxide adsorption studies on delafossite CuFeO2 hydrothermally synthesized

Delafossite CuFeO₂ oxide was synthesized by a hydrothermal technique using Cu₂O and FeOOH as precursors with the addition of fused NaOH as mineralizer. The amount of rhombohedral and hexagonal delafossite phase formed depends on the synthesis time lapses between 2 and 5 days and on the NaOH concentration. The compounds obtained were analyzed with Raman Spectroscopy, X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) in order to obtain their morphological and structural properties. Optical behavior was studied by UV–vis Spectroscopy and gas adsorption measured with a Quartz-Crystal Microbalance (QCM). Our results show that this type of hydrothermal synthesis is capable of recreating the delafossite-type structure of copper-iron oxide and produces a high yield of material with the right stoichiometry. The highest uptake of carbon dioxide is observed on the sample with the highest ratio between rhombohedral and hexagonal delafossite phase.     

Engineering a Small HOMO–LUMO Gap and Intramolecular C−H Borylation by Diborene/Anthracene Orbital Intercalation

The diborene 1 was synthesized by reduction of a mixture of 1,2-di-9-anthryl-1,2-dibromodiborane(4) ( 6 ) and trimethylphosphine with potassium graphite. The X-ray structure of 1 shows the two anthryl rings to be parallel and their π(C₁₄) systems perpendicular to the diborene π(B=B) system. This twisted conformation allows for intercalation of the relatively high-lying π(B=B) orbital and the low-lying π* orbital of the anthryl moiety with no significant conjugation, resulting in a small HOMO–LUMO gap (HLG) and ultimately a C−H borylation of the anthryl unit. The HLG of 1 was estimated to be 1.57 eV from the onset of the long wavelength band in its UV/Vis absorption spectrum (THF, λ_onset=788 nm). The oxidation of 1 with elemental selenium afforded diboraselenirane 8 in quantitative yield. By oxidative abstraction of one phosphine ligand by another equivalent of elemental selenium, the B−B and C¹−H bonds of 8 were cleaved to give the cyclic 1,9-diborylanthracene 9 .     

An object-parameter approach to predicting unknown data in incomplete fuzzy soft sets

Incomplete data in soft sets lead to uncertainty and inaccuracy in representing and handling information. This paper introduces notions of complete distance between two objects and relative dominance degree between two parameters. Based on both the notions, an object-parameter method is proposed to predict unknown data in incomplete fuzzy soft sets. The proposal makes full use of known data, including the information from the relationship between known values of all objects on a certain parameter and the information from the relationship between known values of an object on all parameters. The effectiveness of the proposal is verified by many examples under the compared investigation of classical predicted methods.     

On the Relative Gain Array (RGA) with singular and rectangular matrices

This paper identifies a significant deficiency in the literature on the application of the Relative Gain Array (RGA) formalism in the case of singular matrices. Specifically, it is shown that the conventional use of the Moore–Penrose pseudoinverse is inappropriate because it fails to preserve critical properties that can be assumed in the nonsingular case. It is then shown that such properties can be rigorously preserved using an alternative generalized matrix inverse.     

Two-Step Structure Phase Transition,Dielectric Anomalies,and Thermochromic Luminescence Behavior in a Direct Band Gap 2D Corrugated Layer Lead Chloride Hybrid of [(CH3)4N]4Pb3Cl10

A direct band gap 2D corrugated layer lead chloride hybrid, [(CH₃)₄N]₄Pb₃Cl₁₀ ( 1 ), shows analogous topology to the {Mg₃F₁₀⁴⁻}_∞ layer in Cs₄Mg₃F₁₀, and with the (CH₃)₄N⁺ cations locating in the inorganic layer voids and between the interlayers. Two reversible structural phase transitions occur in 1 at 225/210 K and 328/325 K upon heating/cooling, respectively. On going from the low- to intermediate-temperature phase, the space group changes from P2₁/c to Cmca, and the crystallographic axis perpendicular to the layers is doubled with the order–disorder transformation of (CH₃)₄N ⁺ cations between the interlayers. The intermediate- and high-temperature phases are isomorphic with similar cell parameters and packing structure; their main difference concerns the disorder degree of the (CH₃)₄N ⁺ cations between the interlayers. The two-step structural phase transitions lead to dielectric anomalies around the corresponding T_c. Interestingly, 1 shows multiband emission, originating from the recombination of exciton and emission of defects. Moreover, 1 exhibits divergent thermochromic luminescent features around the T_c on the intermediate to low temperature transition.     

Prediction of hydrodynamic performance of an FLNG system in side-by-side offloading operation

Floating liquefied natural gas (FLNG) is a type of liquefied natural gas (LNG) production system that shows prospects in exploitation of stranded offshore gas fields. The dynamic performance of an FLNG system in side-by-side configuration with a LNG carrier under the combined actions of wave, current and wind can be quite complex. This paper presents a comprehensive study on the hydrodynamics of an FLNG system with a focus on the nonlinear coupling effects of vessels and connection systems based on the concept FLNG prototype recently designed for South China Sea. In this study, the hydrodynamic characteristics of the two floating vessels connected through hawsers and fenders are investigated using a state-of-the-art time-domain simulation code SIMO, considering their mechanical and hydrodynamic coupling effects. The simulation model consisting of FLNG and LNG carrier is developed and calibrated by a series of model tests including a tuned damping and viscous levels. The hydrodynamic performances of the two floating vessels under an extreme sea state during side-by-side offloading operation are obtained, and their relative motions and the force responses of the connection hawsers and fenders are analyzed. Sensitivity studies are conducted to clarify contributions from the pretension and the stiffness of the connection hawsers. The effects on the hydrodynamic performance of the vessels and on the loads of the connection system are also investigated.     

Band gap engineering in silicene: A theoretical study of density functional tight-binding theory

In this work, we performed first principles calculations based on self-consistent charge density functional tight-binding to investigate different mechanisms of band gap tuning of silicene. We optimized structures of silicene sheet, functionalized silicene with H, CH₃ and F groups and nanoribbons with the edge of zigzag and armchair. Then we calculated electronic properties of silicene, functionalized silicene under uniaxial elastic strain, silicene nanoribbons and silicene under external electrical fields. It is found that the bond length and buckling value for relaxed silicene is agreeable with experimental and other theoretical values. Our results show that the band gap opens by functionalization of silicene. Also, we found that the direct band gap at K point for silicene changed to the direct band gap at the gamma point. Also, the functionalized silicene band gap decrease with increasing of the strain. For all sizes of the zigzag silicene nanoribbons, the band gap is near zero, while an oscillating decay occurs for the band gap of the armchair nanoribbons with increasing the nanoribbons width. At finally, it can be seen that the external electric field can open the band gap of silicene. We found that by increasing the electric field magnitude the band gap increases.