Non-bilayer formation in the DPPE-DPPG vesicle system induced by deep rough mutant of Salmonella minnesota R595 lipopolysaccharide

The vesicle system consisting of 80 mol% dipalmitoylphosphatidylethanolamine (DPPE) and 20 mol% dipalmitoylphosphatidylglycerol (DPPG) undergoes to structural changes caused by various concentrations of Salmonella minnesota R595 lipopolysaccharide (LPS). The phenomenon was investigated by methods applying small- and wide-angle X-ray scattering (SAXS and WAXS), calorimetry (DSC) and freeze-fracture. In the low LPS concentration regime (investigated at 0.02 LPS/DPPE–DPPG molar ratio) a phase separation was observed. Two kind of domains are formed which are rich and poor in DPPE and in these domains cubic and lamellar structures are present, respectively. Increasing the LPS concentration up to 0.1 LPS/DPPE–DPPG molar ratio the phase separation is more expressed and the temperature domains of the phase transitions are more different. Increasing the temperature chain melting of the lamellar phase occurs first and destruction of the cubic phase is observed later. At high LPS concentration (equimolar ratio of LPS/DPPE–DPPG), where this amphiphilic molecule cannot be considered any more a guest molecule, the cubic structure dominates the phase behaviour of the LPS molecules.     

热壁条件下油气的热着火现象

设计了高温热壁油气热着火实验系统,对受限空间油气混合气体在热壁条件下的热着火现象进行了实验研究。根据实验结果,详细讨论了油气混合物的着火方式、临界着火温度、着火压力范围以及体积分数、温度的变化规律。实验发现:热壁条件下油气混合物引燃分为油蒸气的热裂解-油气快速氧化反应-油气急速氧化反应3个阶段;油气混合物着火模式为燃烧、热爆燃和热爆炸;油气在汽油自燃点附近开始快速化学反应,热着火临界温度高于汽油自燃点近80 K;温度特征曲线在着火时具有突变性质;热壁温度达到783～873 K时,存在压力范围为2.2～17.6 kPa的三角形油气热着火压力半岛。     

采用J积分对沥青混合料抗裂性能进行评价

沥青混合料是一种由集料、胶浆和孔隙组成的非均质材料,一般被认为是一种粘弹性材料,其力学行为介于弹性和塑性之间,采用弹塑性断裂力学更适合评价沥青混合料的抗裂性能.J积分理论可以避开分析裂纹尖端附近复杂的应力应变场,物理意义明确,可以有效的评价沥青混合料的抗裂性能,断裂韧度JC可以很方便的采用预切缝的半圆弯拉试验直接获得.为了评价材料本身特性对断裂韧度JC影响,在MTS试验系统上进行了3种级配的沥青混合料的断裂韧度试验.采用基于数字图像处理技术的有限元方法对半圆弯拉试验进行了模拟,并将数值模拟的结果与试验的结果进行了对比分析.结论表明,断裂韧度JC可以作为一有效的评价沥青混合料抗裂性能的指标.     

C2H4-O2混合气体直接起爆的临界能量

主要基于化学动力学和Ng模型,对C2H4-O2混合气体的爆轰胞格尺寸进行预测;结合Lee表面积能量模型,预测物质在不同初始压力和化学当量比的条件下,直接起爆引起球面爆轰的临界起爆能量。直接起爆实验主要采用高压电点火提供起爆能量,起爆能量通过放电过程中电流的输出信号确定。结果表明,理论预测与实验值较吻合。首先,通过化学动力学计算得出ZND模型的爆轰参数,利用Ng模型得出爆轰胞格尺寸与ZND诱导区长度之间的比例因数A在不同初始压力与当量比的条件下分别为:A=43.815(1+p1/p0)-0.123 71和A=8.531exp(φ/3.135)+28.644,在此基础上对爆轰胞格尺寸进行定量预测。胞格尺寸的理论预测与实验结果吻合。其次,把爆轰胞格尺寸作为中间特征参数并结合Lee的表面积能量模型,提出可以预测临界起爆能量的定量模型,并得出C2H4-O2混合气体直接起爆的临界起爆能量与初始压力和化学当量比的参量拟合关系分别为Ec=0.332(p1/p0)-2.017和Ec=exp[3.951(φ-1.401)2-1.9]。     

有水平流时双流体混合物对流的时空演变

在水平流动作用下混合流体(比如水和酒精)的Rayleigh-Benard对流,由于外部强制力和内在行波传播的耦合,构成了研究开流系统中斑图选择和非线性耗散波的理想模型系统,本文介绍对该系统初步的研究成果.首先简述了线性稳定性分析以及水平流对行波非线性分岔特性的影响,然后主要给出我们对这一系统在有限空间非周期边界条件下一维行波对流的研究成果,包括存在的时空形态及其特性对Rayleigh数和槽道长度的依赖关系,最后给出了进一步工作的展望.      

Synthesis of Cu–Cr diketo,sublimable, eutectic composite complex,rod crystals from LDH as suitable MOCVD precursor of CuCr2O4 catalysts upon ceramic preforms for N2O decomposition

Metal-acteylacetonates are important sublimable metal-organic precursors for metal-oxide thin film formation over solid preforms by MOCVD (Metal Organic Chemical Vapour Deposition) technique. Mixed-metal-acetylacetonates (MMAA) are suitable starting materials for mixed metal nano-oxidic thin film formation through such facile routes. Layered Double Hydroxides (LDH) of suitable metal ion combination can perform as appropriate starting base for neutralisation by enol form of 2,4-pentanedione or acteylacetonate tautomer ligands to obtain such MMAA. In this paper synthesis of composite crystals of Cu(II)/Cr(III) acetylacetonates (CCAA) is reported by the reaction of Cu–Cr-LDH with acetylacetone. The products were characterized by various different techniques. The surface area and pore volume analysis of the crystals showed the formation of nanopores in the compound. TEM analysis confirmed that the inner core of the nanoporous crystals of Cu(acac)₂ was covered by coating of poorly crystallised Cr(acac)₃ and they together form the composite crystals, and they together form the composite crystals. Due to eutectic mixture formation the melting point of CCAA lies in between the melting points of individual components Cu(acac)₂ and Cr(acac)₃ and shows sublimability, a property important for the formation of MOCVD films. The composite was used for CuCr₂O₄ spinel mixed oxide films formation over solid ceramic honeycomb monolithic substrates. Application prospects of the route in the field of catalysis is high as it can directly combine the benefits of mixed metal oxide catalysis and structured supports without the involvement of a third component. In this work the performance of such a catalytic device has been tested for low temperature decomposition of high Global Warming Potential (GWP) gas N₂O to N₂ and O₂.     

尾年金分布的存在性和结构

本文主要是在年金分布的基础上, 推广、定义并研究了一类$r$尾年金分布的存在性和结构, 给出了这类分布的存在性条件, 证明了在一定条件下, $r$尾年金分布是年金分布与某一特殊$r$尾年金分布的混合.     

激光触发SF6-N2混合气体开关的数值模拟

 在气体放电物理的基础上，对SF₆和N₂采用双光子电离模型，对碳氢化合物的光电离采用3能级模型，并考虑了混合气体的热电离和激光对气体的欧姆加热作用，建立了激光触发SF₆-N₂混合气体开关的数值模型，模拟了激光触发SF6-N2混合气体多级间隙开关实验。激光触发延迟时间的计算值与实验结果符合较好。理论计算表明：激光触发SF₆-N₂混合气体间隙开关的延迟时间随SF₆含量的增加呈上升趋势，而随激光脉冲能量、充气压力等的上升呈下降趋势。     

氨吸收式串联型动力/制冷复合循环

本文提出了一种新型的采用氨水混合工质的动力／制冷复合循环,该循环以中低温工业余热或燃气轮机排气为热源,将动力、制冷子循环采用串联方式连接,基础循环工质为氨质量浓度为0．27的氨水溶液,热源为365℃／104．3 kPa 的热空气,透平进气参数为350℃／3750 kPa,,以热效率η1、(火用)效率η2作为评价准则,模拟计算表明本循环的热效率η1 为17．8％,炯效率η2为45％,通过与其它有代表性的分供系统及联供系统进行热力性能方面的比较,表明本循环η1、η2均有不同程度提高。     

Investigation on improving characteristics of two-cell SBS system with CCl4/C2H5OH liquid mixture

In order to improve the performance of the two-cell stimulated Brillouin scattering （SBS） system, this paper proposes the methods of using mixtures, which require amplifier media to have small absorption rate, and generator media to have high optical breakdown threshold and Brillouin frequency shift equal to that of the amplification media. The characteristics of the two-cell SBS system are studied experimentally by using CCl4 as amplifier medium and CCl4, C2H5OH and CCl4/C2H5OH liquid mixture as generator medium pumped by Nd：YAG Q-switched laser. The obtained results show that liquid mixture in generator cell improves the power load ability, phase conjugation fidelity, energy reflectivity （ER） and ER stability.