In situ prepared polypyrrole for low humidity QCM sensor and related theoretical calculation

In situ preparation of polypyrrole (Ppy) by photo-polymerization coated on a quartz crystal microbalance (QCM) as a low humidity sensor was reported. Different concentrations of Ppy films say 0 wt.% (as blank), 0.1, 1, and 10 wt.% were investigated to measure humidity concentrations between 14.7 and 5412.5 ppm_v. The adsorption/desorption behavior was also examined at humidity concentration 510.2 ppm_v. The sensitivities of 0, 0.1 and 1 wt.% Ppy films at 51.5 ppm_v were 0.143, 0.219 and 0.427, respectively. For 1 wt.% Ppy, the highest sensitivity was obtained. The slope and correlation coefficients (R²) for 1 wt.% Ppy at the ranges of 14.7–898.6 ppm_v were 0.0646 and 0.9909, respectively. A series of molecular simulations have been carried out to calculate bond energy for the water molecule interaction with Ppy, which was found to be 3 kcal/mol indicating the existence of hydrogen bonding during the sorption process. Based on Langmuir isotherm adsorption assumption, for 0.1 and 1 wt.% Ppy films, the association constants were 2606.30 and 5792.98, respectively. This larger association constant for 1 wt.% Ppy film explains higher sensitivity.     

Graphs to chemical structures. 4: Combinatorial enumeration of planted three-dimensional trees as stereochemical models of monosubstituted alkanes

Planted three-dimensional (3D) trees, which are defined as a 3D version of planted trees, are enumerated by means of Fujita’s proligand method formulated in Parts 1–3 of this series [Fujita in Theor Chem Acc 113:73–79, 80–86, 2005; Fujita in Theor Chem Acc 115:37–53, 2006]. By starting from the concepts of proligand and promolecule introduced previously [Fujita in Tetrahedron 47:31–46, 1991], a planted promolecule is defined as a 3D object in which the substitution positions of a given 3D skeleton are occupied by a root and proligands. Then, such planted promolecules are introduced as models of planted 3D-trees. Because each of the proligands in a given planted promolecule is regarded as another intermediate planted promolecule in a nested fashion, the given planted promolecule is recursively constructed by a set of such intermediates planted promolecules. The recursive nature of such intermediate planted promolecules is used to derive generating functions for enumerating planted promolecules or planted 3D-trees. The generating functions are based on cycle indices with chirality fittingness (CI-CFs), which are composed of three kinds of sphericity indices (SIs), i.e., a _d for homospheric cycles, c _d for enantiospheric cycles, and b _d for hemispheric cycles. For the purpose of evaluating c _d recursively, the concept of diploid is proposed, where the nested nature of c _d is demonstrated clearly. The SIs are applied to derive functional equations for recursive calculations, i.e., a(x), c(x ²), and b(x). Thereby, planted 3D-trees or equivalently monosubstituted alkanes as stereoisomers are enumerated recursively by counting planted promolecules. The resulting values are collected up to 20 carbon content in a tabular form. Now, the enumeration problem initiated by mathematician Cayley [Philos Mag 47(4):444–446, 1874] has been solved in such a systematic and integrated manner as satisfying both mathematical and chemical requirements.     

Membrane-oxide semiconductor field-effect transistor (MOSFET) sensors

MOSFET-sensors can be considered as membrane-oxide-semiconductor field-effect transistors. MOSFETs can be divided into ISFETs, GasFETs, BioFETs, these sensors being sensitive to ion, gas, biomolecules respectively and there is also a possibility to fabricate MOSFET reference electrode (RefFET). The development and theoretical treatment of various type of MOSFET-sensors are presented in this paper.     

Chemical diffusion of oxygen in tin dioxide: Effects of dopants and oxygen partial pressure

Tin dioxide SnO_2−δ is a pronounced n-type electron conductor due to its oxygen deficiency. This study investigates the rate of chemical diffusion of oxygen in SnO_2−δ single crystals, which is a crucial step in the overall stoichiometry change of the material. The chemical diffusion coefficient D^δ was determined from conductivity- and EPR-relaxation methods. The temperature dependence was found to be . The dependence on crystal orientation, dopant content and oxygen partial pressure was below experimental error. The latter observation leads to the conclusion that the chemical diffusion coefficient is close to the diffusion coefficient of oxygen vacancies. Along with the relaxation process resulting from the chemical diffusion of oxygen, additional processes were observed. One of these was attributed to complications in the defect chemistry of the material. The relevance of the results for the kinetics of drift processes of Taguchi sensors is discussed.     

Detection of Tumor Necrosis Factor Gene by Piezoelectric Nucleic Acid Senosr

A piezoelectric nucleic acid sensor was constructed ofr detection of tumor necrosis factor gene.Two methods were employed for immobilization of nucleic acid probe on gold electrode of piezoelectric crystal.The results show that polyethyleneimine adbesion and glutaraldehyde cross-linking method has higher sensitivity,stability and selectivity than protein A method.The solid-phase nucleic acid hybridization of oligo unclecotides and tumor necrosis factor target gene sequence were monitorde using this sensor.Tumor necrosis factor gene sequence(580bp) was detected by this nucleic acid sensor for the first time.     

味觉电化学传感器的研究——Ⅰ.甜、酸、苦、咸物质对模拟生物膜电位振动频率的影响

本文以十六烷基三甲基溴化铵/含苦味酸的硝基苯/蔗糖溶液为研究体系,发现甜、酸、苦、咸物质均能使体系的振动波形和频率发生变化,初步建立了测定有味物质的定性、定量方法,并对该味觉电化学传感器的响应机理进行了探讨。     

2,2’-联吡啶-1,1’-二氧化物与Mn(Ⅱ)的三聚体配合物的合成及性能

Mn( )能与许多氮氧化合物形成配合物 ,Wilde对 Mn( )与 2 ,2 -联吡啶及 1 ,1 -二氮杂菲的均配配合物作过详细研究 [1,2 ] ;Mn( )与 2 ,2 -联吡啶 - 1 ,1 -二氧化物 ( bipy O2 )的配合物也有综述 [3] .Mn( )与 bipy O2 的配合物大多是以 Cl O- 4、NO- 3、[Pt Cl4 ]2 -为阴离子 ,少数是卤离子 .它们均形成配位体数目为 3的单核螯合物 ,这些配合物是在水或乙醇中合成的 .Mn( )与 bipy O2 的多核聚合物还未见报道 .本文用 DMF为溶剂 ,以无水 Mn Cl2 和 2 ,2 -联吡啶 - 1 ,1 -二氧化物为原料 ,合成了 Mn( )与bipy O2 的三聚…     

烯烃聚合数学模拟研究与现状

综述了近年来国内外在烯烃聚合微观形态和宏观反应器数学模拟方面取得的研究成果，指出了烯烃聚合过程数学模拟的发展方向。     

小型管道pH传感器的研制及其于自动化在线监测中的应用

研制了数种结构简单、实用的小型管道玻璃膜ｐＨ传感器和小型管道ＰＶＣ膜ｐＨ传感器，并将其与普通的酸度计和自动采样器（自制）等合理组合，构成了自动采样酸度在线监测装置，该装置与计算机自动化控制系统联网，已用于稀土萃取分离槽液的酸度自动化在线监测，结果满意。     

Design of Supramolecular Cyclodextrin Complex Sensors for Ion and Molecule Recognition in Water

The design and function of novel supramolecular fluoroionophore/cyclodextrin (CyD) complex sensors for ion and molecule recognition in water are reviewed. For the crown ether fluoroionophore/-CyD complex, the dimerization of the fluoroionophore inside the -CyD is found to be selectively promoted by alkali metal ion binding, thereby resulting in metal-ion-selective pyrene dimer emission in water. This supramolecular function is successfully utilized in the design of a podand fluoroionophore/-CyD complex for sensing toxic lead ion in water. The boronic acid fluoroionophore/-CyD complex binds sugars and produces increased fluorescence emission in water. The response mechanism appears to be due to the suppression of the photoinduced electron transfer (PET) from pyrene donor to trigonal phenylboronic acid acceptor. This is a novel emission function provided by the boronic acid fluoroionophore/-CyD complex sensors in water.