烧结温度和掺杂浓度对Y_4Zr_3O_(12)∶Eu~(3+)荧光粉发光性质的影响

采用溶胶凝胶法制备了Y_4Zr_3O_(12)∶Eu~(3+)纳米荧光粉,分别采用XRD、TEM和荧光光谱仪对样品的结构、形貌和发光性能进行了表征,探讨了烧结温度和Eu~(3+)掺杂浓度对荧光粉发光性能的影响。结果表明,样品可以被394 nm和467 nm的激发光有效激发。样品的最佳烧结温度和Eu~(3+)离子的最佳掺杂摩尔分数分别为1 400℃和18%。浓度猝灭主要归因于电偶极-电偶极相互作用。     

赤潮光谱特征及其形成机制

采用海面以上光谱测量方法 (Above water method),利用美国FieldSpec® Dual VNIR光谱仪测量了丹麦细柱藻、中肋骨条藻、海洋褐胞藻等三种浮游植物赤潮以及红色中缢虫这一原生动物赤潮的离水辐射光谱数据。强调赤潮与正常海水的光谱差异在于687～728 nm波段的特征反射峰,指出了浮游植物赤潮与原生动物赤潮间的显著光谱差异,并认为可据此进行某些赤潮种类的遥感识别。给出了浮游植物赤潮光谱反射峰、吸收峰成因;红色中缢虫这一原生动物引起的水色异常,与其体内的共生藻类及浮游植物色素碎屑有关;其摄食偏好、与藻类的共生特性研究以及藻类常温下的荧光发射特性研究,将有助于加深对于红色中缢虫赤潮光谱成因的认识。     

CaMoO4：Eu3+,Bi3+,Li+红色荧光粉的共沉淀制备与表征

采用共沉淀法合成了红色荧光粉Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺及Ca_0.5MoO₄：Eu_0.25-2x³⁺, Bi_x³⁺,Li_0.25+x⁺,并采用X射线衍射(XRD)、拉曼光谱,扫描电镜(SEM)和荧光光谱(PL)测定分析了其结构形貌特征及发光性能。结果表明：制备的CaMoO₄：Eu³⁺,Bi³⁺,Li⁺红色荧光粉为白钨矿结构,颗粒尺寸约为0.5~1 μm。掺杂Bi³⁺的Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺的相对发光强度明显高于未掺Bi³⁺的Ca_0.75MoO₄：Eu_0.25³⁺荧光粉。Bi³⁺离子的掺杂将吸收来的能量传递给激活离子Eu³⁺,起到了能量传递的作用。当Bi³⁺掺杂量为x=0.005时,在395 nm激发下,主发射峰在616 nm处的相对发光强度最大,但掺杂浓度过高时会出现浓度猝灭现象。另外,电荷补偿剂的掺入能够解决材料中因同晶取代引起的电荷不平衡的问题,以Li⁺作电荷补偿剂、Eu³⁺和 Bi³⁺共掺合成的Ca_0.5MoO₄：Eu³⁺_0.23,Bi_0.01³⁺,Li⁺_0.26红色荧光粉的发光性能强于Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.5MoO₄：Eu_0.25³⁺, Li_0.25⁺及Ca_0.75MoO₄：Eu_0.24³⁺,Bi_0.01³⁺。     

基于高光谱成像技术的油菜叶片SPAD值检测

以油菜叶片为研究对象,利用高光谱成像技术,成功建立了叶绿素相对值SPAD值的预测模型。共采集了160个油菜叶片样本在380～1030 nm范围内的高光谱图像。选择500～900 nm之间的平均光谱作为油菜叶片样本的光谱。利用蒙特卡罗最小二乘法(monte carlo partial least squares, MC-PLS)剔除了13个异常样本,基于剩余的147个样本光谱数据与SPAD测量值进行分析,采用了不同的方法建立了多种预测模型,包括：全光谱的偏最小二乘法(partial least squares, PLS)模型,连续投影算法(successive projections algorithm, SPA)选择特征波长的PLS预测模型,“红边”位置(λ_red)的简单经验估测模型,三种植被指数R₇₁₀/R₇₆₀,(R₇₅₀-R₇₀₅)/(R₇₅₀-R₇₀₅)和R₈₆₀/(R₅₅₀*R₇₀₈)分别建立的简单经验估测模型,以及基于这三种植被指数的PLS预测模型。建模结果显示,全光谱的PLS模型预测效果最为精确,其预测相关系数r_p为0.833 9,预测均方根误差RMSEP为1.52。而使用SPA算法选出的8个特征波长所建立的PLS模型其预测结果可达到与全光谱的PLS模型非常接近的水平,而且在保证一定精度的条件下减少了大量运算,节省了运算时间,大幅提高了建模的速度。而基于红边位置和选择的三种植被指数而建立的简单经验估计模型其预测结果虽与基于全光谱的PLS预测模型有一定差距,但模型简单、运算量小,适合用于对精度要求不高的场合,对后续的便携仪器设备开发有一定的指导作用。     

Heterogeneous Chemiluminescence of Crystal Phosphors on X‐Ray or UV Irradiation

Using a highvacuum assembly with molecular beams and setups with an implemented atom probe, we investigated atomic and molecular adsorption luminescence of the oxides CaOBi and MgO in O and O₂ beams and also radicalrecombination luminescence excited by H and O atoms in ZnS and in ZnS,CdS samples activated with silver, copper, and the rareearth element Tm. It is established that exposure to UV light and xray radiation of the CaOBi, MgO, and ZnSTm samples, where the mechanism of direct excitation of heterogeneous chemiluminescence (HCL) is realized, does not influence the characteristics of the heterogeneous chemiluminescence, whereas similar exposure of the ZnS,CdSCu,Al and ZnS,CdSAg samples and of selfactivated ZnS, in which the excitation of heterogeneous chemiluminescence is due to the ionization of the lattice, leads to an increase in the intensity of heterogeneous chemiluminescence up to five orders of magnitude. The mechanisms of the phenomenon are considered.     

Bright Red Organic Electroluminescent Devices Based on a Soluble Rare Earth Complex Eu(TTA)_3 Phen

ＩｎｔｒｏｄｕｃｔｉｏｎＯｒｇａｎｉｃｅｌｅｃｔｒｏｌｕｍｉｎｅｓｃｅｎｔ（ＥＬ）ｄｅｖｉｃｅｓｈａｖｅｂｅｃｏｍｅｏｎｅｏｆｔｈｅｍｏｓｔｉｍｐｏｒｔａｎｔｓｕｂ－ｊｅｃｔｓｂｅｃａｕｓｅｏｆｔｈｅｉｒｐｏｔｅｎｔｉａｌａｐｐｌｉｃａｔｉｏｎａｓｌ...     

用于白光LED的单一基质白光荧光粉Ca2SiO3Cl2:Eu2+，Mn2+的发光性质

用高温固相法合成了Eu²⁺，Mn²⁺共激活的Ca₂SiO₃Cl₂高亮度白色发光材料，并对其发光性质进行了研究. 该荧光粉在近紫外光激发下发出强的白色荧光，Eu^{2+中心形成峰值为419 nm和498 nm的特征宽带，通过Eu2+中心向Mn2+中心的能量传递导致了峰值为578 nm的发射，三个谱带叠加从而在单一基质中得到了白光. 激发光谱均分布在250—415 nm的波长范围，红绿蓝三个发射带的激发谱峰值分别位于385 nm，412 nm，370 nm和396 nm处，可以被InGaN管芯产生的紫外辐射有效激发. Ca₂SiO₃Cl₂:Eu2+，Mn2+是一种很有前途的单一基质白光LED荧光粉.}     

Fluram labeling of high density NH2 surfaces

Some surface bonded and fluram labeled primary amines show a new red-shifted emission in their fluorescence spectrum. We compared the fluorescence of fluram bonded to various amine functionalized surfaces including tetraethylene pentamine (TEPA), 1,2-ethylene diamine (EDA), 3-aminopropyltriethoxy silane (APTES) and trimetylol-propanetris-(beta-aziridino)-propionate (ATA). All reactions were also monitored using XPS. It was found that the new spectral features seem to be related to the local density of amino groups on the surface. In order to verify this hypothesis we synthesized a surface bonded dendrimer with a step-wise increasing NH₂ density. Using molecules with different lengths as branches in the dendrimer, the amine density can be varied. Only in the case of the highest density, the new fluorescence emission was detected. Consequently, the fluorescence of fluram coupled to amines at a surface can be used to quantify the concentration of these amines and the appearance of the red-shifted emission indicates a high local density of the amino groups.