甲酚红褪色分光光度法测定芬布芬的研究及其应用

在pH9.00的tris-HCl缓冲溶液中,甲酚红与芬布芬反应形成离子缔合物,使甲酚红溶液褪色.实验结果表明:最大褪色波长位于569.0nm,芬布芬浓度在0.05086～10.17μg/mL范围内遵循比尔定律,回归方程为ΔA=0.1702c+0.0107(c=μg/mL),相关系数为r=0.9996,表观摩尔吸光系数为4.537×104 L·mol-1·cm-1.据此建立了测定药物制剂和生物样品中芬布芬含量的褪色分光光度法,样品测定平均回收率为97.97%～101.6%.     

Development and validation of a rapid HPLC method for the determination of five banned fat-soluble colorants in spices using a narrow-bore monolithic column

This work reports a fast and simple liquid chromatographic method for the simultaneous determination of five banned fat-soluble synthetic colorants, namely Sudan I-IV and Para-Red, in spice samples. The analytes were successfully separated isocratically in less than 5 min on the new narrow bore monolithic column, FastGradient^® Chromolith (50 mm × 2.0 mm i.d.) using a mobile phase of 0.1% (v/v) HCOOH/acetonitrile (35/65%, v/v) at a flow rate of 1.5 mL min⁻¹. All colorants were detected at 506 nm. The main parameters (mobile phase composition, flow rate, injection volume) affecting the separation were studied. The proposed method was thoroughly validated in terms of linearity, LODs, precision and accuracy. The method was applied to the determination of the studied azo-dyes in various spices (paprika, chilli and mixed spice powders) after ultrasound-assisted extraction. Satisfactory recoveries, ranging from 92% to 109% were obtained.     

Ba_3(PO_4)_2:Ce~(3+),Dy~(3+)荧光粉的组成与发光特性研究

在活性炭还原气氛下高温固相法合成了Ba3(PO4)2:Ce3+,Dy3+紫外发射荧光粉。XRD图谱表明,烧结温度为1100℃时保温处理3 h,样品为单相的Ba3(PO4)2型六方晶系结构。荧光光谱显示:单掺Ce3+样品中,Ce3+掺杂浓度为8%(摩尔分数)时样品的发光最强,发射峰的位置处在350 nm附近(Ce3+的2D→2F5/2和2D→2F7/2跃迁发射)。适量的Sr2+取代部分Ba2+离子,改变了基质晶格环境,使样品的发光强度得到提高且发射峰向长波方向红移。引入Dy3+作为敏化剂,样品发射峰红移到386 nm,亮度增强,主要是由于Dy3+和Ce3+之间发生了有效的能量传递过程。确定了Dy3+的最佳掺杂浓度为3%,发光强度提高了27%。     

Conformational changes of strong polycations in the presence of divalent counterions and their influence upon the flocculation efficiency

The interaction between strong polycations, which possess the ammonium quaternary centers attached to an acrylic macromolecular chain derived from poly(N,N-dimethylaminoethyl methacrylate) (polycations Q_x), and divalent counterions was investigated by viscometry and turbidimetry. Conformational changes of polycations were influenced by the polycation charge density, counterion nature (SO₄²⁻ or S₂O₈²⁻) and concentration. The morphology of the polycation layers deposited onto silicon wafers has been studied by tapping mode atomic force microscopy, a strong influence of the polycation and ammonium persulfate concentration on the surface topography being observed. The optimum flocculation concentration of polycation decreased and the flocculation window increased in the presence of S₂O₈²⁻, in the destabilization of kaolin model dispersion. Removal of Congo Red from aqueous solution by the complex system formed between polycations and divalent counterions was also investigated. The behavior of polycations Q_x in separation processes was compared with that of one polycation containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride units in the backbone (PCA₅).     

Hydrodynamic lift of vesicles and red blood cells in flow — from Fåhræus & Lindqvist to microfluidic cell sorting

Hydrodynamic lift forces acting on cells and particles in fluid flow receive ongoing attention from medicine, mathematics, physics and engineering. The early findings of Fåhræus & Lindqvist on the viscosity change of blood with the diameter of capillaries motivated extensive studies both experimentally and theoretically to illuminate the underlying physics. We review this historical development that led to the discovery of the inertial and non-inertial lift forces and elucidate the origins of these forces that are still not entirely clear. Exploiting microfluidic techniques induced a tremendous amount of new insights especially into the more complex interactions between the flow field and deformable objects like vesicles or red blood cells. We trace the way from the investigation of single cell dynamics to the recent developments of microfluidic techniques for particle and cell sorting using hydrodynamic forces. Such continuous and label-free on-chip cell sorting devices promise to revolutionize medical analyses for personalized point-of-care diagnosis. We present the state-of-the-art of different hydrodynamic lift-based techniques and discuss their advantages and limitations.     

LiBa0.95-yBO3:0.05Tb3+,yBi3+荧光粉的制备及荧光性质

以硼酸和碳酸盐为原料,用高温固相法制备了可被（近）紫外光（369、254 nm）有效激发的Tb³⁺单掺杂LiBa_1-xBO₃：xTb³⁺（物质的量分数x=0.02、0.03、0.04、0.05、0.06、0.07）及Bi³⁺和Tb³⁺共掺杂LiBa_0.95-yBO₃：0.05Tb³⁺,yBi³⁺（物质的量分数y=0.02、0.03、0.04、0.05、0.06、0.07）的2个系列荧光粉,产物的结构和形貌分别用粉末X射线衍射（PXRD）和扫描电子显微镜进行表征。PXRD测定结果表明2个系列的产物均为纯相LiBaBO₃。通过对第一系列产物荧光光谱的测定,筛选出发光强度最好的产物,据此确定铽离子的最佳掺杂量;在此基础上制备出铋离子掺杂量不同的第二系列荧光粉。荧光光谱测定的实验结果表明,Tb³⁺/Bi³⁺共掺杂的荧光粉的发光强度好于Tb³⁺单掺杂的荧光粉,这说明Bi³⁺对Tb³⁺有敏化作用;而且随着Bi³⁺掺杂量的增加,产物的荧光强度表现出先增加后减小的趋势,当Bi³⁺的掺杂量y=0.03时,产物的荧光强度达到最大。Bi³⁺和Tb³⁺之间存在偶极-四极相互作用而进行能量传递。系列荧光粉的CIE坐标显示其发光颜色在一定程度上呈现出由绿色光到白光的渐变趋势。     

UV/乙酰丙酮法降解脱色蒽醌类染料茜素红

染料废水由于色度高,成份复杂,是一种较难处理的工业废水. 本研究以茜素红为蒽醌类染料的代表,研究了UV/乙酰丙酮（简称UV/AA）法中茜素红浓度、乙酰丙酮用量、溶液初始pH对降解脱色效率的影响. 实验结果表明,UV/AA法在中、酸性条件下对茜素红具有显著的降解脱色效果,其脱色过程符合准一级动力学,降解速率常数远高于UV/H₂O₂法. 基于溶液pH对UV/AA法脱色效果以及乙酰丙酮紫外吸收光谱的影响,推测在UV/AA法降解脱色染料的过程中起主导作用的是乙酰丙酮的烯醇式异构体. 尽管UV/AA法对总有机碳和化学耗氧量的去除率不高,但是显著提高了溶液的可生化性. 因此,UV/AA法有望作为预处理工艺与传统的生物处理法相结合,以较低的成本实现染料废水的达标处理. 这一工作为小分子双酮在染料废水处理中的应用研究提供了新的思路.     

Determination of chlorophenols in red wine using ionic liquid countercurrent chromatography as a new pretreatment method followed by high‐performance liquid chromatography

A countercurrent chromatography method for the enrichment and cleanup of chlorophenols from food samples was successfully established by using an ionic‐liquid‐modified two‐phase solvent system composed of dichloromethane containing 2% 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide and water. The column was firstly filled with the organic stationary phase, and then a large volume of sample was pumped into the column after it was equilibrated with pure water at the rotation speed. Finally, the trace amounts of chlorophenols extracted and enriched in the stationary phase were eluted out by an alkaline mobile phase and determined by high‐performance liquid chromatography. Under optimized conditions, the enrichment and cleanup of the chlorophenols can be fulfilled online with enrichment factors (34–65) and high recoveries (84.69–95.23%). The method has been applied to the determination of chlorophenols in real red wine samples with the limits of detection in the range of 1.89–4.21 μg/L. The present method is highly suitable for the pretreatment of large volume of aqueous sample for the determination of trace amounts of contaminants in food and environmental samples.     

Novel powellite-based red-emitting phosphors: CaLa1−xNbMoO8:xEu for white light emitting diodes

We report the photoluminescence properties of a novel powellite-based red-emitting phosphor material: CaLa_1−xNbMoO₈:xEu³⁺ (0.01, 0.03, 0.05, 0.1) for the first time. The photoluminescence investigations indicated that CaLa_1−xNbMoO₈:xEu³⁺ emits strong red light at 615 nm originating from ⁵D₀→⁷F₂ (electric dipole transition) under excitation either into the ⁵L₀ state with 394 nm or the ⁵D₂ state with 464 nm, that correspond to the two popular emission lines from near-UV and blue LED chips, respectively. When compared with emission intensity from a CaMoO₄:Eu³⁺, the emission from CaLaNbMoO₈:Eu³⁺ showed greater intensity values under the same excitation wavelength (394 nm). The enhanced red emission is attributed to the enhanced f-f absorption of Eu³⁺. These materials could be promising red phosphors for use in generating white light in phosphor-converted white light emitting diodes (WLEDs).