Enthalpic determinations of aliphatic ester-solvent systems with correlations

Calorimetric measurements were carried out on ester-solvent systems where the esters were H(CH₂)_xCOO(CH₂)_yH, with x and y varying from 1 to 5, and the solvents were n-hexane and 1,2-dichloroethane. Calculation of the enthalpies of cavity formation enabled the enthalpies of interaction to be determined. Both enthalpies correlated with number of carbon atoms N, equal to x+y in the esters, giving for 1,2-dichloroethane

腔靶X射线辐射对称特性实验观测

在“神光”装置上用两种特殊结构的实验靶型,通过两个不同方位的诊断孔观测腔内壁Ｘ光再辐射的空间能谱结构和Ｘ光辐射总量,分别研究了与激光第一打击面完全对称和不对称的腔内壁（两个被观测位置相差９０°）Ｘ光辐射能谱和辐射能量的对称性,并对测量结果进行了简要的分析讨论．     

Enzymatic hydrolysis reaction of phospholipids in monolayers

The hydrolysis reaction of , and , -dipalmitoylphosphatidylcholine (DPPC) catalized by bee venom phospholipase A₂ was studied in spreading monolayer at the water/air interface. DPPC and the hydrolysis products, palmitic acid and -lysophosphatidylcholine, palmitoyl were characterized at the interface by means of surface pressure, surface potential and ellipsometric measurements. Furthermore, mixed monolayers of reagents and products were investigated to ascertain their miscibility. The results show that the hydrolysis reaction can be followed by the decrease of surface pressure with time on subphases containing β-cyclodextrin, a well-known complexing agent of many amphiphilic compounds. The order of the reaction, the kinetic constant and other kinetic parameters are deduced.     

Formation of Iron Macro-Spheres in Plasma

In this paper the formation mechanism of iron macro-spheres in a plasma medium is dealt with, including the conditions under which such spheres are formed. The geometry of the spheres referred to above depends on the main technological parameters involved in the production of pores. Conditions under which pores occur within macro-spheres are also established. The radii of these pores are sensitive to the velocity distribution within the plasma jet section     

高氯酸二水邻菲咯啉合铜配合物的合成和晶体结构

Crystal structure of the title compound， Cu(phen)(H₂O)₂·ClO₄(phen=1，10-phenanthroline)， was deter-mined by X-ray crystallography. It crystallizes in the monoclinic system， space group C2/c with lattice parameters a=1.49071(4)nm， b=1.38594(4)nm， c=0.70292(1)nm， β=108.509(1)° and Z=4; The Cu(Ⅰ) ion is chelated by a phen ligand and two aqua ligands in cis arrangement and assumes a C2 symmetric square-planar geometry with the CuN₂O₂ core. Eight Cu(phen)(H₂O)₂·ClO₄ molecules are interconnected by strong hydrogen bonds between coordinated water molecules and uncoordinated perchlorate anions to form a molecular scale cavities along c axis. The bond distances of Cu-N and Cu-O are 0.2003(4)nm and 0.1973(3)nm， respectively. CCDC： 197600.     

Isoindole Cycloadditions. Part III: The Synthesis of "Windscreen Wiper" and Other N-Bridged Cavity Systems

The thermal addition of N-carbobenzyloxyisoindole (N-Z isoindole) 11a, generated by the reaction of 3,6-di(2-pyridyl)-s-tetrazine 9 with N-Z 7-azabenzonorbornadiene 8a, onto dimethyl tricyclo[4.2.1.0^2.5]nona-3,7-diene-3,4-dicarboxylate 17 occurred site selectively at the cyclobutene -bond to form a stereoisomeric mixture of 1 : 1-adducts 18 and 19, in which the bent-frame isomer 19 was dominant (ratio 5 : 1). In contrast, N-benzyl tetrafluoroisoindole 11c reacted with 17 only under high-pressure conditions (14 kbar, RT, 4 days) to afford 1 : 1-adducts at the cyclobutene site, in which the extended-frame isomer 18c was dominant and the accompanying bent-frame product 19c reverted to starting materials soon after isolation. These same stereoselectivities were used to prepare "windscreen wiper" compound 28c having two mobile N-benzyl substituents attached to a rigid scaffold by the reaction of N-benzyl tetrafluoroisoindole 11c with tetramethyl tetracyclo[4.4.1.0.^2,5.0^7.10]undeca-3,8-diene-3,4,7,8-tetracarboxylate 23. Cavity bis-(cyclobutene-1,2-diester) 6 reacted with N-benzyl tetrafluoroisoindole 11c twice over to produce cavity structure 36 with two O- and two N-benzyl bridges on the inner face, whereas the narrower cavity bis-alkene 32 stopped at the 1 : 1-addition stage. The dynamics of the Z-group in the dual adducts 26a–28a are discussed briefly and key adducts and cavity systems have been structurally evaluated by X-ray crystallography, VT NMR, and molecular modeling.     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.     

On the cavitation energy of water

Free-energy-perturbation theory from molecular dynamics calculations has been used to obtain the DeltaG of adjoining cavities' formation in water. The DeltaGs for systems with three, five and seven cavities are compared with that of a single cavity of the same volume, and found to be in good agreement. The conditions under which the analytical formulation of the energy of cavity formation proposed by Pierotti holds are discussed. The data for a single cavity have been tabulated and can lend themselves to a simple numerical implementation in standard quantum chemical packages, which can be used when high accuracy for DeltaG(cav) is required.     

Validation of an empirical RNA-ligand scoring function for fast flexible docking using RiboDock®

We report the design and validation of a fast empirical function for scoring RNA-ligand interactions, and describe its implementation within RiboDock, a virtual screening system for automated flexible docking. Building on well-known protein-ligand scoring function foundations, features were added to describe the interactions of common RNA-binding functional groups that were not handled adequately by conventional terms, to disfavour non-complementary polar contacts, and to control non-specific charged interactions. The results of validation experiments against known structures of RNA-ligand complexes compare favourably with previously reported methods. Binding modes were well predicted in most cases and good discrimination was achieved between native and non-native ligands for each binding site, and between native and non-native binding sites for each ligand. Further evidence of the ability of the method to identify true RNA binders is provided by compound selection ('enrichment factor') experiments based around a series of HIV-1 TAR RNA-binding ligands. Significant enrichment in true binders was achieved amongst high scoring docking hits, even when selection was from a library of structurally related, positively charged molecules. Coupled with a semi-automated cavity detection algorithm for identification of putative ligand binding sites, also described here, the method is suitable for the screening of very large databases of molecules against RNA and RNA-protein interfaces, such as those presented by the bacterial ribosome.     

Study on δ‐form complex in syndiotactic polystyrene–organic molecules systems. IV. Formation of complexes with a mixture of solvents and structural changes during the sorption of solvents by syndiotactic polystyrene mesophase membranes

The syndiotactic polystyrene (sPS) δ form was crystallized from mixtures with different compositions of p‐chlorotoluene–chlorobenzene (p‐CT–CB) and p‐chlorotoluene–1,1,2‐trichloroethane (p‐CT–TCE). The presence of the δ form and TTGG helical conformation was confirmed by Fourier transform infrared and wide‐angle X‐ray diffraction (WAXD) analyses. In sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes, the relative absorbance (RA) of the p‐chlorotoluene (p‐CT) solvent peak was very high even at very low concentrations of p‐CT in comparison with the RA of higher concentrations of chlorobenzene (CB) or 1,1,2‐trichloroethane (TCE) in the mixtures. However, the RAs of both CB and TCE solvent peaks decreased with decreasing concentrations of CB and TCE in the mixtures. A negligible decrease in the RA of the TTGG helical content was observed with a decreasing concentration of CB or TCE. The WAXD results showed that the 2θ peak positions of the [010] and [ 10] planes of the sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes appeared in the same position and were almost equal to those of the sPS–p‐CT δ‐form membrane. The mesophases of the sPS–p‐CT [p‐CT (A‐M)] and sPS–TCE [TCE (A‐M)] membranes were used for the sorption studies with different concentrations of various solvents. The sorption amount of aromatic solvents by both p‐CT (A‐M) and TCE (A‐M) mesophase membranes was higher than that of aliphatic solvents, regardless of the size, shape, and nature of the molecular cavity. The 2θ peak of the [010] plane of the sPS membranes slowly approached the original δ‐form value when the sPS mesophase membranes were immersed in various solvents of different concentrations for 48 h. The shifting of the 2θ peak of the [010] plane to the original δ form depended on the nature and concentration of the immersion solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2380–2387, 2005