Interaction of Sodium Dodecyl Sulfate with Poly(ethyleneimine) in Bulk Solution and at the Air-Solution Interface

Interaction of sodium dodecyl sulfate (SDS) with the cationic polyelectrolyte poly(ethyleneimine) (PEI) was investigated in this study. Turbidity measurements were performed in order to analyze the interaction and complex formation in bulk solution as a function of polymer concentration and pH. Surface tension measurements were made to investigate the properties of SDS/PEI/water mixtures at air/solution interface. Results revealed that SDS/PEI complexes form in solution depending on the surfactant and polymer concentration. A decrease was observed in surface tension values in the presence of SDS/PEI mixtures compared to the values of pure SDS solutions. Both solution and interfacial properties exhibited pH dependent behavior. A shift was seen in the critical micelle concentration of SDS solutions as a function of PEI concentration and solution pH. Monovalent and divalent salt additions showed some influence on the interfacial properties of SDS solutions in the presence of PEI.     

Synthesis and Characterization of Functionalized Polyorganosiloxanes Containing Amino and Fluorocarbon Side Chains

A series of functional polyorganosiloxanes containing fluorocarbon side chain and amino groups had been synthesized by ring-opening polymerization. The raw materials used were Octamethyl cyclotetrasiloxane (D₄), dodecafluoroheptyl-propyl-trimethoxylsilane (502) and γ-aminopropyltriethoxylsilane (550), respectively. FTIR, ¹H-NMR, ¹³C-NMR, and ¹⁹F-NMR were used to characterize the copolymer structures. The surface properties of the functional polyorganosiloxanes emulsions were discussed. The results showed that the functional polyorganosiloxanes containing fluorocarbon and amino side chains had low surface tension and excellent water repellency.     

Effect of Discrete Macroion Charge Distributions on Electric Double Layer of a Spherical Macroion

The effect of replacing the conventional uniform macroion surface charge density with discrete macroion charge distributions on the structure of electric double layer (EDL) of a spherical macroion has been investigated by Monte Carlo (MC) simulations. Two discrete models have been investigated in addition to the central macroion charge: point charges localized on the macroion surface and finite-sized charges protruding into the solution. Both models have been studied with fixed and mobile macroion charges. The radial functions of local densities and electrostatic potential in EDL, are calculated and compared to the results obtained for the central macroion charge distribution. It is concluded that the model of charge distribution significantly affects the EDL structure close to the macroion, while the effect is much weaker at larger distances. With point charges localized on the macroion surface, counterions become stronger accumulated to the macroion, as a result the absolute values of surface potential ?₀ and zeta ξ potential are decreased. With protruding charges, the excluded volume effect dominates over the increased correlation ability; hence the counterions are less accumulated near the macroions and the absolute values of ?₀ and ξ potentials are increased.     

Surface Properties and Solubility of Simvastatin in the Micelles of Polyglycerol Diisostearate Ethoxylates

A series of polyglycerol diisostearate ethoxylates with two hydrophobic chains were prepared by the reaction of polyglycerol diisostearate with ethylene oxide. Surface properties including water solubility, cloud temperature, critical micelle concentration, emulsification, and the solubilizing capacity of polyglycerol diisostearate ethoxylates for simvastatin were investigated in comparison with those of Tween‐80. The critical micelle concentrations of all polyglycerol diisostearate ethoxylates are less than 0.01 mmol l^?1, which is one order of magnitude lower than that of Tween‐80. Polyglycerol diisostearate ethoxylates show better emulsification than Tween‐80. For enhancing the solubility of simvastatin in micelles, polyglycerol diisostearate ethoxylates also are superior to Tween‐80.     

Antibacterial and Antifungal Activities—Surface Active Properties Relation of Novel Dischiff Base Cationic Gemini Amphiphiles Bearing Homogeneous Hydrophobes

A novel series of cationic Gemini amphiphiles containing Dischiff base species were synthesized and their chemical structures were determined using different analytical tools. Their surface properties were determined using surface tension measurements. The adsorption and micellization thermodynamic parameters were calculated using Gibb's equations at 25°C. The surface parameters were also determined including critical micelle concentration, effectiveness, efficiency, maximum surface excess, minimum surface area, interfacial tension, and emulsification power. The synthesized cationic Gemini surfactants were evaluated as bactericides for gram negative and gram positive bacteria and also against sulfur reducing bacteria (SRB). The results of the cytotoxicity of the synthesized compounds against the targeted bacterial strains were promising and completely dependent on the surface activity of these compounds.     

Synthesis of Amphoteric Surfactants via Esterification Process

This article describes the synthesis of a novel amphoteric surfactant through esterification of 2‐hydroxy‐N,N,N‐trimethylethanaminium chloride with maleic acid alkyl ester of C₈, C₁₀, and C₁₂ chain length in the presence of base. Maleic acid alkyl esters were synthesized by the reaction of maleic anhydride with alkyl alcohol. Surface‐active properties were studied by different techniques such as surface tension and foaming property. Critical micelle concentrations (CMCs) were found by using surface tension values to learn the effect of chain length on CMC of synthesized surfactants. The best result obtained has minimal coproducts, an environmentally safer route, and a very good CMC value of surfactants.     

Adsorption of Nonionic Surfactant from Its Aqueous Solution onto Commercial Rubber

Adsorption of Ethoxylated Nonyl Phenol (ENP) surfactant from its aqueous solution onto a commercial tire cutting from different sites. Outer Peristalitic (O.P.), Outer Smouth (O.S.), and Internal Tire (I.T.) is studied after different immersion times, 24, 48, 72, and 144 hrs at 30° C. The adsorption isotherms are determined by a surface tension method. A two stepped L-type isotherm is characteristic below the CMC of ENP; above this concentration the isotherm deviates from the L-type and the slope of the isotherm increases sharply. A Langmuir fit has been found below the CMC of ENP. From the maximum amounts adsorbed at pseudo-plateau (T_max of the tested samples it was found that the efficiency of adsorption onto the rubber surface decreases in the order, O.P. > O.S. > I.T.     

Studies on the Effects of Additional Components on Micellization of CTAB via Surface Tension Measurements

The effects of Tris-HCl buffer solution on the cmc of cetyltrimethylammonium bromide (CTAB) were studied by surface tension measurement. The result shows that the effect of the buffer solution depends on the interaction between CTAB and NaCl and the structure accelerants of water, Tris. A series of parameters, including the critical micelle concentration (cmc), the surface tension at cmc (γ_cmc), the adsorption efficiency (pC₂₀), and the effectiveness of surface tension reduction (∏_cmc) were obtained from the surface tension measurements in the presence of glycine with different concentration in the Tris-HCl buffer solution at 27°C. In addition, maximum surface excess concentration (Γ _max) and minimum surface area per molecule (A_min) at the air-water interface were estimated according to the Gibbs adsorption isotherm. The thermodynamic parameters (Δ C _p,m , Δ H _m,tr , Δ C _p,m,tr ) of micellization for CTAB in the absence and presence of glycine at different temperature were also been obtained.     

Surface-Modified Sb2S3 Nanoparticles and Their Tribological Behaviors in Liquid Paraffin

Sb₂S₃ nanoparticles surface-modified with S-tetradecyl N, N-dihydroxyethyl dithiocarbamate (C₁₄DTC-Sb₂S₃) have been synthesized via extraction of Sb₂S₃ colloidal particles from ethylene glycol into toluene in the presence of C₁₄DTC. The obtained products were characterized by high-resolution transmission electron microscope (HRTEM) and Fourier transformation infrared (FTIR), and their tribological behaviors as an additive in liquid paraffin were investigated using a four-ball tribometer. The results show that C₁₄DTC-Sb₂S₃ nanoparticles can significantly improve the friction reduction, anti-wear, and load-carrying properties of base oils. The preliminary lubrication mechanism was discussed based on the SEM and XPS investigation of the rubbed surfaces.     

MULTIPLE EMULSIONS STABILIZED BY COLLOIDAL MICROGRYSTALLINE CELLULOSE

Multiple emulsions stabilized by colloidal microcrystalline cellulose (CMCC, Avicel RC591) at the w/o and o/w interfaces, and by the addition of Span 80 or Span 85 at the w/o interface, were studied by means of brightfield microscopy, freeze-etch electron microscopy, droplet size distribution analysis and rheologic measurements. Stable multiple emulsions were prepared by incorporation of sodium chloride in the innermost aqueous phase, thereby creating an osmotic gradient preventing loss of the inner aqueous phase to the external aqueous phase. Freeze-etch electron microscopy of the multiple emulsions indicated the presence of a network of microcrystalline cellulose at the outer o/w interface. It may be assumed that the surfactant directly stabilized the w/o interface by adsorption at the interface, as well as indirectly by facilitating wetting of the microcrystalline cellulose by the oil. From rheologic measurements, the existence of a three-dimensional network in the external aqueous phase was indicated by the considerable degrees of thlxotropy and significant static yield values of these multiple emulsions.