The Role of Surface Nonuniformity in Controlling the Initiation of a Galvanic Replacement Reaction

The use of silver nanocrystals—asymmetrically truncated octahedrons and nanobars—characterized by a nonuniform surface as substrates for a galvanic replacement reaction was investigated. As the surfaces of these nanocrystals contain facets with a variety of different areas, shapes, and atomic arrangements, we were able to examine the roles of these parameters in different stages of the galvanic replacement reaction with HAuCl₄ (e.g., pitting, hollowing, pit closing, and pore formation), and thus obtain a deeper understanding of the reaction mechanism than is possible with silver nanocubes. We found that the most important of these parameters was the atomic arrangement, that is, whether the surface was capped by a {100} or {111} facet, and that the area and shape of the facet had essentially no effect on the initiation of the reaction. Interestingly, through the reaction with asymmetrically truncated octahedrons, we were also able to demonstrate that even when pitting occurred over a large area, this region would be sealed through a combination of atomic diffusion and deposition during the intermediate stages of the reaction. Consequently, even if pitting occurred across a large percentage of the nanocrystal surface, it was still possible to maintain the morphology of the template throughout the reaction.     

Molecular dynamics simulation study of microstructure evolution during cyclic martensitic transformations

Shape memory alloys (SMA) exhibit a number of features which are not easily explained by equilibrium thermodynamics, including hysteresis in the phase transformation and “reverse” shape memory in the high symmetry phase. Processing can change these features: repeated cycling can “train” the reverse shape memory effect, while changing the amount of hysteresis and other functional properties. These effects are likely to be due to formations of localised defects and these can be studied by atomistic methods. Here we present a molecular dynamics simulation study of such behaviour employing a two-dimensional, binary Lennard-Jones model. Our atomistic model exhibits a symmetry breaking, displacive phase transition from a high temperature, entropically stabilised, austenite-like phase to a low temperature martensite-like phase. The simulations show transformations in this model material proceed by non-diffusive nucleation and growth processes and produce distinct microstructures. We observe the generation of persistent lattice defects during forward-and-reverse transformations which serve as nucleation centres in subsequent transformation processes. These defects interfere the temporal and spatial progression of transformations and thereby affect subsequent product morphologies. During cyclic transformations we observe accumulations of lattice defects so as to establish new microstructural elements which represent a memory of the previous morphologies. These new elements are self-organised and they provide a basis of the reversible shape memory effect in the model material.     

低温时效处理对铁磁形状记忆合金Mn2NiGa的结构、相变和磁性能的影响

对在较低温度范围的时效处理铁磁形状记忆合金Mn₂NiGa的结构、相变和磁性进行了研究.研究发现,母相基体析出了细小的析出相,引起了晶格扭曲和畸变,导致了系统内产生了很大的内应力.在其浓度超过晶格的容忍度之后,提升了体系的马氏体相变温度,使母相在时效温度下转变成马氏体相,并在其中测量到高达900 Oe的矫顽力.由于这种马氏体相的逆相变温度大幅提高,外推获得其居里温度在530 K附近.细小析出相的粗化使内应力消失,样品又回到母相状态.观察到细小析出相粗化的两个阈值温度,分别为423 K和 关键词： 铁磁形状记忆合金 2NiGa')" href="#">Mn₂NiGa 时效处理 内应力     

First-principles calculations on temperature-dependent elastic constants of rare-earth intermetallic compounds: YAg and YCu

We present the temperature-dependent elastic constants of two ductile rare-earth intermetallic compounds YAg and YCu with CsCl-type B2 structure by using a first-principles approach. The elastic moduli as a function of temperature are predicted from the combination of static volume-dependent elastic constants obtained by the first-principles total-energy method with density-functional theory and the thermal expansion obtained by the first-principles phonon calculations with density-functional perturbation theory. The comparison between our calculated results and the available experimental data for Ag and Cu provides good agreements. In the calculated temperature 0-1000 K, the elastic constants of YAg and YCu follow a normal behavior with temperature that those decrease with increasing temperature, and satisfy the stability conditions for B2 structures. The Cauchy pressure for YAg and YCu as a function of temperature is also discussed, and our results mean that YAg and YCu become more ductile while increasing temperature.     

Ab initio study of electronic and magnetic properties of the Fe3Zn intermetallic

First-principles calculations have been carried out to study the electronic structure and magnetic properties of the Fe₃Zn compound with the full-potential linearized augmented-plane wave (FLAPW) method. The results indicate a lower magnetostriction for Fe₃Zn as compared to Galfenol (Fe-Ga), as a result of a weaker spin-orbit coupling, which is due to a smaller magnetic moment induced on the Zn atom. With the Zn addition to Fe the bulk modulus and the cohesive energy (per atom) decrease, whereas the electronic specific heat coefficient γ has a substantial increase.     

7A04铝合金产品黑斑原因分析

利用金相显微镜、扫描电镜和能谱仪,分析了7A04铝合金产品产生黑斑的原因.结果表明,化合物偏析和局部腐蚀是引起7A04铝合金产品产生黑斑的原因.     

Magnetic and transport properties of RCr0.3Ge2 (R=Tb, Dy, Ho and Er) compounds

The magnetic and transport properties of ternary rare-earth chromium germanides RCr_0.3Ge₂ (R=Y and Tb-Er) have been determined. X-ray and neutron diffraction studies indicate that these compounds have the CeNiSi₂-type structure (space group Cmcm) [1]. Magnetic measurements reveal the antiferromagnetic ordering below T_N equal to 18.5 K (R=Tb), 11.8 K (Dy), 5.8 K (Ho) and 3.4 K (Er). From the neutron diffraction data the magnetic structures have been determined. For TbCr_0.3Ge₂ and DyCr_0.3Ge₂ at low temperatures the magnetic ordering can be described by two vectors k₁=(,0,0) and k₂=(,0,), and k₁′=(,0,0) and k₂′=(,0,), respectively. In HoCr_0.3Ge₂ and ErCr_0.3Ge₂ the ordering can be described by one propagation vector equal to (,,0) and (0,0,0.4187(2)), respectively. In DyCr_0.3Ge₂ some change in the magnetic ordering is observed at T_t=5.1 K. In temperature range from T_t to T_N the magnetic ordering is given by one propagation vector k=(,0,0). YCr_0.3Ge₂ is a Pauli paramagnet down to 1.72 K which suggests that in the entire RCr_0.3Ge₂ series the Cr atoms do not carry magnetic moments. All compounds studied exhibit metallic character of the electrical conductivity. The temperature dependencies of the lattice parameters reveal strong magnetostriction effect at the respective Nèel temperatures.     

Rare-earth hexaborides nanostructures: Recent advances in materials, characterization and investigations of physical properties

Nanostructured rare-earth hexaborides (REB₆) are promising materials for photonic and electronic applications due to their unique characteristic. These include high melting point, hardness, chemical stability, low work function, low volatility at high temperatures, superconductivity, magnetic properties, efficiency, thermionic emission, and narrow band semiconductivity. This article focuses on recent developments regarding the synthesis, characterization, and applications of REB₆ nanostructures. We first summarize information regarding the classification and crystal chemistry of REB₆. Next, we examine the means by which researchers have successfully synthesized REB₆. We consider the structural properties and morphology of REB₆, and the growth mechanism involved in their fabrication. Finally, we offer suggestions for the use of REB₆ nanostructures in photonic and electronic applications, and identifying four areas for further research.     

Effect of ultrasonic melt processing and Al-Ti-B on the microstructural refinement of recycled Al alloys

Refining the α-Al grain size and controlling the morphology of intermetallic phases during solidification of Al alloys using ultrasonic melt processing (USMP) and Al-Ti-B have been extensively used in academic and industry. While, their synergy effect on the formation of these phases has not yet clearly demonstrated. In this paper, the influence of USMP and Al-Ti-B on the solidified microstructure of multicomponent Al-4.5Cu-0.5Mn-0.5Mg-0.2Si-xFe alloys (x = 0.7, and 1.2 wt%) has been comparatively studied. The results show that the USMP + Al-Ti-B method produce a more profound refinement effect than the individual methods. In addition, the area of single Fe-rich phases in both alloys with USMP + Al-Ti-B are also refined compared with conventional methods. A mechanism is proposed for the refinement, which are the deagglomerated TiB₂ parties induced by USMP providing more effective nucleation sites for α-Al, and the refined interdendritic regions limited the growth of Fe-rich phases in the following eutectic reaction. Finally, the application of combined USMP + Al-Ti-B methods is feasible in microstructural refinement, resulting in the improving the casting soundness and mechanical properties of alloys.     

Fluorinated Dicarboxylic Acids and Transition-metal（ll） Complexes with N-ligands： Synthesis, Characterizations and Crystal Structures

水热法合成了5个新的配位聚合物：[Cd（TFSA）（2,2＇-bpy）2]n（1）,[Mn（HFGA）（phen）2]n（2）,[Co（TFSA）（bpp）2（H2O）2]n（3）,[Zn（TFSA）（bpp）2（H2O）2]n（4）和[Cu（HFGA）（phen）]n（5）（TFSA=四氟丁二酸,HFGA=六氟戊二酸,2,2＇-bpy=2,2＇-联吡啶,phen=1,10-邻菲啰啉,bpp=1,3-二吡啶基丙烷）,通过X射线单晶衍射确定了配合物的晶体结构.配合物1和2具有相似的1D链结构,四氟丁二酸和六氟戊二酸以两个单齿羧基氧原子分别配位于Cd2＋和Mn2＋离子,2,2＇-联吡啶和1,10-邻菲啰啉分别螯合配位于Cd2＋和Mn2＋离子.配合物3和4具有相似的1D链结构,1,3-二吡啶基丙烷以两个端基氮原子桥联金属离子,四氟丁二酸和六氟戊二酸分别以单齿方式配位.配合物5是具有{4.82}拓扑的2D网结构,六氟丁二酸配体通过单齿/双齿-桥联模式连接Cu2＋离子.5个配合物均通过分子间弱作用进一步构筑成3D超分子结构.