The effect of ITO films thickness on the properties of flexible organic light emitting diode

Indium tin oxide (ITO) thin films were deposited on cyclic olefin copolymer substrate at room temperature by an inverse target sputtering system. The crystal structure and the surface morphology of the deposited ITO films were examined by X-ray diffraction and atomic force microscopy, separately. The electrical properties of the conductive films were explored by four-point probing. Visible spectrometer was used to measure the optical properties of ITO-coated films. The performance of the flexible organic light emitting diode device with different thickness anode was investigated in this study.     

A high-pressure Raman and X-ray diffraction study of the perovskite SrCeO3

A high-pressure structural study of SrCeO₃ has been performed at room temperature by Raman spectroscopy and X-ray diffraction up to 32 and 45 GPa, respectively. A first-order reversible phase transition is observed at about 12 GPa in both techniques. A second weak structural change, taking place between 18 and 25 GPa, can be suspected from Raman data. The increase in the number of Raman bands and diffraction lines is an indication that the symmetry is lowered and the compound does not evolve towards the ideal cubic perovskite structure. A Rietveld analysis of X-ray data was performed for the low-pressure phase and the atomic positions and the cell lattice parameters variations are reported in this paper. The volume compressibility derived from Raman modes (5.6×10⁻¹² Pa⁻¹), involving mainly bond-stretching for each type of polyhedron, is found to be close to the one obtained from volume cell variations measured by X-ray diffraction (7.9×10⁻¹² Pa⁻¹).     

Calculated elastic constants of dilute alloys based on bcc metals

The elastic constants of dilute alloys based on bcc metals have been calculated using the Green’s function method obtaining explicit expressions for change in elastic constants in terms oft-matrix. The crystal impurity problem is discussed within an impurity model containing central and non-central force constant changes extended up to second neighbours of the impurity. The effect of volume change on elastic constants and a contribution from electron pressure term are considered. Numerical results for changes in three elastic moduli have been presented for a number of dilute alloys based on Mo, Nb, W, Ta and V.     

Effect of the three-body force on triton asymptotic normalization constants by the hyperspherical harmonics expansion method

We investigate the change in the calculated value of asymptotic normalization constant (ANC) by the hyperspherical harmonics expansion method with the inclusion of three nucleon force (3BF) in addition to two nucleon force. We see that ANC does not change very much with the inclusion of 3BF indicating that the 3BF does not alter the asymptotic behaviours of HHE wavefunction significantly.     

A Scanning Electron Microscopy study of water in soil

Cold stage Scanning Electron Microscopy (SEM) with a rapid cooling technique makes it possible to investigate the water phase within unsaturated porous media. It is thought that this technique preserves the main features of the micromorphology of the water menisci as it exists in the liquid phase in soils. Saddle-shaped elements, as well as pendular rings of water, were observed with concave and convex curvatures of the water-air interface. The hydraulic conductivity of an unsaturated soil may be inferred from SEM photographs. Observations of isolated water menisci indicate the existence of an immobile water domain. The surface geometry of the water menisci was analyzed quantitatively and surface tension and capillary pressure were determined.     

An Improved Anharmonic Force Field of Difluoromethanimine, F2C NH

The anharmonic force field of difluoromethanimine, F₂C NH, has been reinvestigated theoretically using a coupled-cluster singles and doubles approach, augmented for structural optimization and harmonic force field by a contribution of connected triple excitations, CCSD(T). The cubic and quartic force constants have been obtained by numerical derivatives computed from analytical quadratic force constants calculated by second-order Møller-Plesset perturbation theory, MP2. The quadratic force constants and the equilibrium structure of F₂C NH have then been scaled by a global least-squares fitting procedure to the spectroscopic data and parameters experimentally determined for this molecule. This force field, obtained in the internal coordinates space and therefore valid for all isotopomers of difluoromethanimine, yields a complete set of spectroscopic molecular constants providing a critical assessment of the experimental rotational and centrifugal distortion constants, fundamentals, overtones, and combination bands determined so far for F₂C NH. In addition, the final force field can be used to make predictions of all important vibrational and rotational parameters which should be accurate and useful for new spectroscopic investigations.     

Evolution of stress and strain relaxation of Ge and SiGe alloy films on Si(0 0 1)

The growth of Ge and SiGe alloy films on Si substrates has attracted considerable interest in the last years because of their importance for optoelectronic devices as well as Si-based high speed transistors. Here we give a short overview on our recent real time stress measurements of Ge and SiGe alloy films on Si(0 0 1) performed with a sensitive cantilever beam technique and accompanied by structural investigations with atomic force microscopy. Characteristic features in the stress curves provide detailed insight into the development and relief of the misfit strain. For the Stranski–Krastanow system Ge/Si(0 0 1) as well as for SiGe films with Si contents below 20%, the strain relaxation proceeds mainly into two steps: (i) by the formation of 3D islands on top of the Ge wetting layer; (ii) via misfit dislocations in larger 3D islands and upon their percolation.     

抽吸和压力梯度在层流边界层转捩过程中的作用

用空间模式的二次稳定性理论研究了抽吸和压力梯度对边界层三维亚谐扰动流动稳定性的影响．数值结果表明，固体边界上的抽吸有明显的层流控制作用，逆压梯度则有较强的不稳定作用．     

Magnetic pole pinning at rectangular defects on MnAs/GaAs(0 0 1)

Strong magnetic poles at characteristic rectangular defects have been observed using a magnetic force microscope on a MnAs(  1 0 0) thin film with the thickness of 30 nm. The MnAs thin film was epitaxially grown on a GaAs(0 0 1) substrate. The magnetic poles were in one-arranging direction, being independent of the magnetization direction of the film. The poles were pinned at the edges of the rectangular defects until just below the Curie temperature, and formed a stable magnetic-field loop on the MnAs surface. The stability of the magnetic pole pinning shows the distinctive feature of the magnetic domain structure on the surface with a strong anisotropy, which was built in the heterostructure of MnAs and GaAs.     

On interrelation between the internal pressure and the cohesion energy density

The question about the definition of the “internal pressure” concept is being discussed. It is shown that the previously found differential relation between the cohesion energy density and the internal pressure is one of the examples of an absolutely general interrelation between definitely connected differential functions. It is ascertained that the ratio (the internal pressure divided by the cohesion energy density) is a structuresensitive parameter inherent to the calorific (thermal) equation of a liquid state.