MILO中场不稳定性的非线性发展及混沌行为

 以磁绝缘传输线振荡器中电子运动和辐射场演化方程为基础，分析了场与电子相互作用过程中的不稳定性。这种不稳定性的发展导致场出现极限环振荡和混沌。在软非线性区域，辐射场表现为不连续的极限环振荡；在硬非线性区域，辐射场表现为连续的混沌行为。控制失谐量可加速或抑制这些不稳定态的出现。优化和调节参数可控制器件的运行状态, 获得较高的输出功率。     

Pressure-induced polymorphism in enstatite (MgSiO3) at room temperature: clinoenstatite and orthoenstatite

The phase transition of a synthetic clinoenstatite in a diamond-anvil cell has been studied by using Raman spectroscopy at various pressures and room temperature. The phenomena observed in clinoenstatite have been compared with that observed in orthoenstatite. It is found that the pressure-induced phase transitions in the two enstatites are reversible, but with different transition pressures and transition behavior. An analysis of Raman spectra has revealed that the two enstatites have different high-pressure polymorphs. This result suggests that the space group of the high-pressure polymorph of orthoenstatite is not of C2/c, and that orthoenstatite and orthoferrosilite have different transition routes at room temperature and high pressure. The compressional behavior of the high-PC2/c enstatite is also discussed according to the pressure dependences of Raman frequencies.     

静压下半导体微腔内激子与光子行为的研究

由于腔模与激子对压力的依赖关系不同,所以可以选择不同的压力使激子和光场处于不同的耦合状态,从而实现对耦合的调谐。利用这种办法,我们观测到了代表激子与光场强耦合作用的Rabi分裂。由于在我们现有样品结构中压力对激子本征行为的影响很小,与以前报道的温度、电场等调谐方式相比,这种调谐方法不仅可以有效地调谐半导体微腔内激子与腔模的耦合程度,而且能够保持激子的本征性质在整个调谐过程中基本不变。这有助于研究在强耦合过程中激子极化激元的本征性质。将实验结果与压力下激子与腔模耦合理论进行拟合,得出了正确的Rabi分裂值。     

Scanning probe microscopy characterization of gold-chemisorbed poplar plastocyanin mutants

Two poplar plastocyanin mutants adsorbed onto gold electrodes have been characterized at single molecule level by scanning probe microscopy. Immobilization of the two redox metalloprotein mutants on Au(1 1 1) surface was achieved by either a disulphide bridge (PCSS) or a single thiol (PCSH), both the anchoring groups having been introduced by site-directed mutagenesis. Scanning tunneling microscopy (STM) and atomic force microscopy (AFM) analysis gives evidence of a stable and robust binding of both mutants to gold. The lateral dimensions, as estimated by STM, and the height above the gold substrate, as evaluated by AFM, of the two mutants well agree with crystallographic sizes. A narrower height distribution is observed for PCSS compared to PCSH, corresponding to a more homogeneous orientation of the former mutant adsorbed onto gold. Major differences between the mutants are observed by electrochemical STM. In particular, the image contrast of adsorbed PCSS is affected by tuning the external electrochemical potential to the redox levels of the mutant, consistent with some involvement of copper active site in the tunneling process. On the contrary, no contrast variation is observed in electrochemical STM of adsorbed PCSH. Moreover, scanning tunneling spectroscopy experiments reveal asymmetric I–V characteristics for single PCSS proteins, reminiscent of a rectifying-like behaviour, whereas an almost symmetric I–V relation is observed for PCSH.     

Experimental study and mathematical modelling of a new of vibro-impact moling device

In this paper experimental study and mathematical modelling of newly designed vibro-impact moling rig are presented. The design is based on electro-mechanical interactions of a conductor with an oscillating magnetic field. The rig consists of a metal bar placed within a solenoid which is connected to an RLC circuit, and an obstacle block positioned nearby. Both the solenoid and the block are attached to a base board. Externally supplied alternating voltage causes the bar to oscillate and hit the block resulting in the forward motion of the base board mimicking a mole penetration through the soil. By varying the excitation voltage and the capacitance in the circuit, a variety of system responses can be obtained.In the paper the rig design and experimental procedure are explained in detail, and the mathematical modelling of the rig is described. Then the obtained coupled electro-mechanical equations of motion are integrated numerically, and a comparison between experimental results and numerical predictions is presented.     

Thermoelastoplastic deformation of a thick-walled cylinder with a radial crack

The thermoelastoplastic fracture mechanics problem of a thick-walled cylinder subjected to internal pressure and a nonuniform temperature field is solved by the method of elastic solutions combined with the finite-element method. The correctness of the solution is provided by using the Barenblatt crack model, in which the stress and strain fields are regular. The elastoplastic problem of a cracked cylinder subjected to internal pressure and a nonuniform temperature field are solved. The calculation results are compared with available data. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 3, pp. 173–183, May–June, 2008.     

Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

热线法测定气体导热系数实验的探讨与改进

在准静态低气压下测量气体的热传导系数时，理论上在低压强范围内应得到Q^-1低-p^-1线性关系图象，但实验数据所绘出的图象出现明显的非线性．本文着重分析出现非线性的原因，并提出实验改进的方法。     

A novel capacitive pressure sensor structure with high sensitivity and quasi-linear responseUne nouvelle structure de capteur de pression capacitif avec haute sensibilitée et réponse quasi-linéaire

This paper describes a new capacitive structure of pressure sensor to increase simultaneously the sensitivity and the linearity of the transducer. This structure contains two capacitors which change in response to pressure, but in opposite senses. To increase even more the sensitivity of each capacitor, the pressure sensitive diaphragm carries a central boss. The optimal position and the length of the boss are also calculated. To cite this article: A. Ettouhami et al., C. R. Mecanique 332 (2004).     

扫描力显微术在高聚物薄膜玻璃化转变研究中的应用

简述了高聚物薄膜玻璃化转变的复杂性，并结合文章作者的的一些研究结果介绍了扫描力显微术(SFM)在研究高聚物玻璃化转变中的一些方法，包括观察高聚物薄膜形貌的变化，测量其摩擦力、粘附力和弹性模量等物理量的变化，最后指出SFM是研究高聚物薄膜玻璃化转变的有力工具。