A Systematic Evaluation of Polyurethane as a Conformal Coating for the Inhibition of Corrosion on Electronic Components

The corrosion of printed circuit boards can be effectively prevented with a polyurethane conformal coating. In this study, the protective performance of PU coating was investigated systematically through electrochemical measurements and simulated exposure/immersion tests. Some fungi tests were also included. All experimental results show that a polyurethane coating effectively inhibits corrosion on printed circuit boards. The optimal thickness of the coating film should be about 60 μm. Long-term exposure tests showed that this coating material could preserve the reliability of the investigated printed circuit boards for more than 400 days in a 90% relative humidity environment at 25°C.     

CHARACTERIZATION OF RADIATION GRAFT COPOLYMER OF INORGANIC COMPOUND ONTO ALKENE

ＣＨＡＲＡＣＴＥＲＩＺＡＴＩＯＮＯＦＲＡＤＩＡＴＩＯＮＧＲＡＦＴＣＯＰＯＬＹＭＥＲＯＦＩＮＯＲＧＡＮＩＣＣＯＭＰＯＵＮＤＯＮＴＯＡＬＫＥＮＥＺｈａｎｇＷａｎｘｉ；ＣｈｅＪｉｔａｉ；ＹａｎＭｅｉｌａｎ（ＣｈａｎｇｃｈｕｎｉｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉ...     

Radiation grafting from binary monomer mixtures. I. Vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol

Gamma-radiation grafting of vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol (VEEG) on polyethylene films has been studied from binary monomer mixtures. The effect of co-monomer composition and total exposure radiation dose on the grafting process is investigated. A combination of potentiometric and gravimetric techniques is applied to determine the grafting degree of each monomer in the final graft copolymer. The presence of more active monomer VEEG in the mixture was found to enhance the grafting of both monomers because the increasing of copolymerization rate which in turn increases the total grafting degree. The modification of the hydrophilic properties of the graft copolymer is studied by examining the grafted films for water- and copper (II) ions uptake.     

多相高分子快离子导体阻抗谱的研究

研究了以ＬｉＣｌＯ４掺杂的聚乙二醇聚氨酯双离子导体及磺酸型聚乙二醇聚氨酯离聚物单一离子导体的阻抗谱，给出了多相快离子导体交流阻抗测试系统的等效电路．通过阻抗谱计算机解析，计算得出了样品的基本电学参数．通过讨论界面阻抗的色散现象，计算出样品的离子电导率，和阻抗谱解析法得到的结果相一致．     

旋转铂盘电极上Cu(phen)_2~(2 )与6-巯基嘌呤的相互作用

在Tris-NaC1*(pH=7.2)缓冲溶液中,应用循环伏安法,微分脉冲伏安法、旋转圆盘电极实验、交流阻抗法及其数据模拟等技术研究了Cu(phen)2 25(phcn=1.10-邻菲咯啉)与6-巯基嘌呤(6-MP)的相互作用.结果显示.Cu(phen)2 2MP与6-MP无论在扩散控制过程或电化学控制过程都发生了相互作用.Cu(phen)2 2及其与6-MP的作用产物于铂电极上均呈现一对氧化还原峰,但后者呈现的氧化还原峰负移.峰电流减小.交流阻抗结果显示,无论6-MP存在与否,Cu(phen)2 2在交流阻抗谱上均呈现两个清晰的电容弧,但当6-MP存在时,电化学反应电阻和电化学吸脱附电阻均增大.Cu(phen)2 2在不同转速下的阻抗拟合结果显示.随转速增大.电化学反应电阻和电化学吸脱附电阻均减小.双电层电容呈增大趋势,而吸脱附电容呈减小趋势:当6-MP存在时.仍然呈现此变化规律.     

All Solid‐State pH Electrode Based on Titanium Nitride Sensitive Film

Titanium nitride was used as pH‐sensitive material to fabricate all solid‐state pH electrode. The fabrication and the response performance of the pH electrode were described in the paper. The TiN film electrode showed a linear response in the pH range of 2–12 with a near‐Nenstian response (?55 mV/pH). The response time was within 1 min, and the electrode had good reproducibility, stability and low sensitivities for different species. Compared with the glass pH electrode, the electrode exhibited some advantages, for example, without activation, rapid response and high mechanical strength. In addition, the electrode performed excellently in a corrosion medium containing F^?(1 M). Electrochemical behaviors of TiN electrode in Britton‐Robinson buffers were studied with Electrochemical Impedance Spectroscopy (EIS).     

Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

辐照温度对聚芳醚酮辐射交联行为的影响

<正> 可溶性含酚酞侧基聚芳醚酮(PEK-C)是一种新型的具有耐高温、耐水解、耐化学腐蚀、自润滑性能的工程塑料,它具有如下结构:     

PP/LDPE共混体系的辐射效应

研究了在多官能团单体—三烯丙基异氰脲酸酯存在下ＰＰ／ＬＤＰＥ共混体系接受γ－辐射的效果。用溶解度参数和ＴＥＭ技术评估了共混体系的相容性与多官能团单体在共混体系中的分布，并用ＳＥＭ、ＤＳＣ、动态力学等方法对共混体系相容性进行了表征。结果表明，ＰＰ／ＬＤＰＥ是不相容的共混体系，三烯丙基异氰脲酸酯主要分布在共混体系的相界面区域，辐照强化了共混体系的相间结合，增加了界面厚度，改善了共混体系的相容性。     

Hydrothermal synthesis, structure, Raman spectroscopy, and self-irradiation studies of Cm(IO3)3

The study of curium iodate, Cm(IO₃)₃, was undertaken as part of a systematic investigation of the 4f- and 5f-elements’ iodates. The reaction of ²⁴⁸CmCl₃ with aqueous H₅IO₆ under mild hydrothermal conditions results in the reduction of IO₆⁵⁻ to IO₃⁻ anions, and the subsequent formation of Cm(IO₃)₃ single crystals. Crystallographic data are: (193 K, MoKα, ): monoclinic, space group P2₁/c, , , , β=100.142(2)°, V=811.76(14), Z=4, R(F)=2.11%, for 119 parameters with 1917 reflections with I>2σ(I). The structure consists of Cm³⁺ cations bound by iodate anions to form [Cm(IO₃)₈] units, where the local coordination environment around the curium centers can be described as a distorted dodecahedron. There are three crystallographically unique iodate anions within the structure; two iodates bridge between three Cm centers, and one iodate bridges between two Cm centers and has a terminal oxygen atom. The bridging of the curium centers by the iodate anions creates a three-dimensional structure. Three strong Raman bands with comparable intensities were observed at 846, 804, and 760 cm⁻¹ and correspond to the I-O symmetric stretching of the three crystallographically distinct iodate ions. The Raman profile suggests a lack of inter-ionic vibrational coupling of the I-O stretching, while intra-ionic coupling provides symmetric and asymmetric components that correspond to each iodate site. Repeated collection of X-ray diffraction data for a crystal of Cm(IO₃)₃ over a period of time revealed a gradual expansion of the unit cell from self-irradiation. After 71 days, the new parameters were: , , , β=100.021(2)°, V=818.3(2).