(Na1/2Bi1/2)Cu3Ti4O12陶瓷的微观结构和电学性质

利用固相反应法在不同烧结温度条件下制备了一系列(Na_1/2Bi_1/2)Cu₃Ti₄O₁₂(NBCTO)陶瓷样品,研究了它们的晶体结构、微观组织结构、介电性质和复阻抗及其随温度的变化. 实验发现NBCTO陶瓷所呈现出的电学性质与CaCu₃Ti₄O₁₂陶瓷相应的电学性质非常类似. 烧结温度为990℃至1060℃范围的NBCTO陶瓷样品室 关键词： 高介电材料 介电性质 复阻抗 内阻挡层电容     

高功率低阻抗三平板传输线的设计

设计了Z箍缩实验装置中单路模块样机的低阻抗水介质三平板结构的传输线。根据三平板传输线的结构参数及相关计算公式,得到所设计的三平板传输线实际阻抗为4.08Ω(设计阻抗为4.00Ω)。在考虑传输线内板边缘与水箱耦合电容影响的条件下,采用有限元方法精确计算得到三平板传输线阻抗为3.77Ω。根据实验得到的传输线入口、出口电压电流测量结果,计算得到三平板传输线的实际运行阻抗为3.83Ω,与计算结果基本一致。另外,还对三平板传输线进行了静电场计算和分析,耐压实验表明,当三平板传输线出口电压达到3.1 MV时,未出现绝缘闪络,绝缘设计满足指标要求。     

Radiation damage from EELS and NEXAFS in diesel soot and diesel soot extracts

Carbon NEXAFS and EELS spectra of soot, and NEXAFS spectra of soot extracts, are presented. The EELS spectra of solid soot particles from a TEM-EELS show fewer structures than the corresponding NEXAFS spectra obtained at two different synchrotron beamlines. We attribute radiation damage in the TEM-EELS to the failure at resolving structures of surface functional carbon groups in or on soot. NEXAFS spectra of soot extracts studied with a scanning transmission X-ray microscope show alterations during X-ray exposure, which can be explained by a simple chemical model where oxygen apparently reacts with the sample. When the same extract is studied in an ultrahigh-vacuum beamline, no such alterations are observed.     

大面积染料敏化太阳电池的串联阻抗特性研究

在电子扩散微分方程的基础上,研究了染料敏化太阳电池光生电流和光生电压随光照强度不同的变化关系.提出敏化太阳电池串联阻抗功率损耗模型,理论模拟了大面积电池（有效面积>1 cm²）光电转换效率随多孔薄膜有效面积宽度变化的曲线、透明导电基底膜与银栅极的比接触电阻以及在不同入射光强下银栅极体电阻对大面积染料敏化太阳电池光伏性能的影响.结果表明透明导电基底膜的方块电阻和银栅极体电阻对大面积染料敏化太阳电池的性能有很大影响,而这种影响随光强的减弱逐渐减小. 关键词： 染料敏化 太阳电池 串联阻抗 光电转换效率     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

三维电阻抗成像的体积元方法的数值模拟和分析

电阻抗成像是一类椭圆方程反问题,本文在三维区域上对其进行数值模拟和分析.对于椭圆方程Neumann边值正问题,本文提出了四面体单元上的一类对称体积元格式,并证明了格式的半正定性及解的存在性;引入单元形状矩阵的概念,简化了系数矩阵的计算;提出了对电阻率进行拼接逼近的方法来降低反问题求解规模,使之与正问题的求解规模相匹配;导出了误差泛函的Jacobi矩阵的计算公式,利用体积元格式的对称性和特殊的电流基向量,将每次迭代中需要求解的正问题的个数降到最低.一系列数值实验的结果验证了数学模型的可靠性和算法的可行性.本文所提出的这些方法,已成功应用于三维电阻抗成像的实际数值模拟.     

三级炮加载技术在超高压状态方程研究中的应用

根据阻抗梯度飞片设计原则和超高速数值模拟技术设计出一种新的叠层波阻抗梯度飞片,并利用三级炮加载技术将Ta飞片加速至9 km/s以上,测量了Ta在超高压下的状态方程。三级炮实验实现了冲击波速度与粒子速度的同时测量,Ta的Hugoniot数据与文献中发表的数据具有很好的线性关系,说明三级炮加载技术适合于材料超高压状态方程研究。     

Acoustic properties of micro-perforated panel absorber having arbitrary cross-sectional perforations

Micro-perforated panel absorber is used in many noise control applications as a next-generation absorbing material. Perforation shapes of micro-perforated panel studied are usually circular in the past. However, in practice, the perforations are often non-circular or irregular shape due to manufacturing techniques. Sound absorption coefficient and absorption bandwidth of the micro-perforated panel absorber may be further improved, when the perforations in shape are changed. In view of the existing exact solutions of sound propagation in tubes, the simple formulas of specific acoustic impedances of the tubes for triangle and square cross-sectional perforations are derived. Mass reactance end correction of the micro-perforated panel is obtained based on the sound radiation of a shaped piston. The specific acoustic impedance ratio of the micro-perforated panel absorber is calculated and analyzed, which can predict its sound absorption bandwidth. Finally, for closed perforations, the influences of the perforations in shape (including triangle, circle, square and irregular circle) on sound absorption of the MPP absorber are discussed in collaboration with FE simulations.     

Swelling and structure of radiation induced near-surface damage in CR-39 and its chemical etching

Systematic measurements of swelling of CR-39 nuclear track detector (NTD) due to irradiation with fission fragments and alpha particles over a wide range of fluences from ²⁵²Cf are presented here. Precisely designed and optimized exposure and chemical etching experiments were employed to unfold the structure of radiation induced surface damage. Delays in the startup of the chemical etching of latent tracks in low radiation fluence detectors are measured and are found to contain important information about structure of the surface damage. Simple atomic scale pictures of radiation induced surface damage and its chemical etching are developed using measurements of radiation induced swelling of CR-39 detectors and nuclear track parameters. The computer code SRIM2010 was utilized for the calculations of basic features of latent tracks of fission fragments and alpha particles in CR-39. Another computer code TRACK_VISION was used to compute parameters of etched tracks. Computations and experimental findings in the paper coherently compose a realistic picture of radiation damage.     

Numerical simulation and analysis of generalized difference method on triangular networks for electrical impedance tomography

Electrical impedance tomography is an inverse problem of elliptic differential equations. Numerical methods based on combining generalized difference method and Levenberg–Marquardt iteration on a planar domain are proposed. Positive semi-definiteness and existence of solution of the generalized difference scheme are proved. Element geometry matrix is introduced to shortcut calculation and standardize computer program. A series of numerical experiments verify the reliability of its mathematical model and the feasibility of the algorithm. A class of electrical current patterns is proposed to minimize the number of direct problems to be solved in each iteration. These methods have been applied successfully in practical simulation of electrical impedance tomography.