Uptake of weathered p,p′-DDE by plant species effective at accumulating soil elements

Ten plant species previously shown to accumulate inorganic elements effectively from natural solids were grown under field conditions in p,p′-dichlorodiphenyldichloroethane (p,p′-DDE) contaminated soil. The plant species, which included rye, mustard, canola, vetch, pigeonpea, clover, peanut, and 3 cultivars of white lupin, represented both monocots and dicots, as well as two major families within the dicots: the Brassicaceae and the Fabaceae. The plants varied widely in their ability to phytoextract and translocate weathered p,p′-DDE. The percentage of contaminant phytoextracted ranged from 0.06% (white lupin) to 0.22% (clover, vetch), and the translocation factors (TF; contaminant concentration ratio of stems to roots) ranged from 0.04 (clover, white lupin) to 0.37 (canola). An inverse relationship exists between the amount of contaminant in the roots as measured by the root BCF (bioconcentration factor; dry weight contaminant concentration ratio of root to soil) and the TF. Duplicate mounds of each species were periodically amended with nitrogen (N), phosphorus (P), nitrogen and phosphorus together (N/P); a minus phosphorus treatment involved the addition of AlSO₄ to the soil prior to planting. The effect of nutrient regime on plant biomass, p,p′-DDE uptake and translocation, and inorganic element content varied greatly among the 10 plant species. For some species (rye, vetch, pigeonpea, clover, white lupin), reductions or non-significant changes in p,p′-DDE uptake were observed under the nutrient treatments and were not correlated with plant biomass effects. For mustard, canola, and peanut, the percentage of p,p′-DDE phytoextracted in the various treatments was more than doubled and was directly correlated with a two-fold increase in total plant biomass. Although it is generally assumed that fertilizer amendments will enhance the phytoremediation of organic and inorganic pollutants, the data here suggest that such effects are highly species specific and in some cases may actually decrease remediation potential.     

Event-triggered sliding mode control for switched genetic regulatory networks with persistent dwell time

This paper focus on the event-triggered sliding mode controller design for discrete-time switched genetic regulatory networks (GRNs) with persistent dwell time (PDT) switching. Firstly, the observation error dynamics of switched GRNs with PDT is constructed in the light of event-triggered sliding mode control (SMC) scheme. Next, sufficient conditions are derived to ensure the exponential stability of the augmented plant. Moreover, an event-triggered SMC law is synthesized to impel the system trajectories onto the sliding surface in a finite time. Finally, a verification example is provided to illustrate the effectiveness and potential of the proposed method.     

Temperature- and hydration-dependence of molecular mobility in seeds

Broad-band ac dielectric relaxation spectroscopy (DRS) and various techniques of thermally stimulated currents (TSC) have been used to investigate molecular mobility in cereal and legume seeds, over wide ranges of water content and temperature. We focused our interest on the detailed study of the interactions between water and seed constituents. The results are quantitatively discussed, using various concepts dictated by the experimental techniques employed and in relation to the protein and carbohydrate contents of the seeds. In addition, the glass transition in the seeds, freezing and melting of water, and the protonic conduction process have been studied in some detail.Financial support through the Greek Ministry of Industry, Energy and Technology (Secretariat of Research and Technology), the Czech Ministry of Education, Youth and Sport (Dept. of International Scientific and Technological Cooperation), and the Empirikos Foundation is gratefully acknowledged.     

Study of poly(bisphenol A carbonate) relaxation kinetics at the glass transition temperature

In this work, the variations of the relaxation times are investigated above and below the glass transition temperature of a model amorphous polymer, the polycarbonate. Three different techniques (calorimetric, dielectric and thermostimulated currents) are used to achieve this goal. The relaxation time at the glass transition temperature was determined at the temperature dependence convergence of the relaxation times calculated with dynamic dielectric spectroscopy (DDS) for the liquid state and thermostimulated depolarisation currents (TSDC) for the vitreous state. We find a value of τ(T_g) = 110 s for PC samples. The knowledge of the temperature dependence, τ(T), and the value τ(T_g) enables to determine the glass-forming liquid fragility index, m. We find m = 178 ± 5.     

Cathode of a fuel cell with a solid polymer electrolyte: Calculating overall currents in the presence of a gas-diffusion layer

Mathematical apparatus, which makes it possible to perform calculations of the current-voltage characteristics of cathodes of fuel cells with a solid polymer electrolyte in conditions where there are present extraneous diffusion restrictions is proposed. In so doing, the partial pressure of oxygen and the absolute pressure of gas in the gas chamber may assume any values. First of all presented are the results of calculations of the current-voltage characteristics intrinsic to active layers of the air and oxygen cathodes, which are performed under the assumption that the extraneous diffusion restrictions are absent altogether. Thereafter, in the same conditions (at the same parameters that characterize the active layer of a cathode), obtained are results of a calculation of the current-voltage characteristics inherent in the air and oxygen cathodes in the presence of extraneous diffusion restrictions. Afterward there is performed an analysis of the way a gas-diffusion layer restricts the process of generation of current in a cathode and of what measures should be taken in order for the extraneous diffusion restrictions to become less significant.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Ring currents as probes of the aromaticity of inorganic monocycles : P5-, As5-, S2N2, S3N3-, S4N3+, S4N42+, S5N5+, S42+ and Se42+

Current-density maps were calculated by the ipsocentric CTOCD-DZ/6-311G** (CTOCD-DZ=continuous transformation of origin of current density-diamagnetic zero) approach for three sets of inorganic monocycles: S(4) (2+), Se(4) (2+), S(2)N(2), P(5) (-) and As(5) (-) with 6 pi electrons; S(3)N(3) (-), S(4)N(3) (+) and S(4)N(4) (2+) with 10 pi electrons; and S(5)N(5) (+) with 14 pi electrons. Ipsocentric orbital analysis was used to partition the currents into contributions from small groups of active electrons and to interpret the contributions in terms of symmetry- and energy-based selection rules. All nine systems were found to support diatropic pi currents, reinforced by sigma circulations in P(5) (-), As(5) (-), S(3)N(3) (-), S(4)N(3) (+), S(4)N(4) (2+) and S(5)N(5) (+), but opposed by them in S(4) (2+), Se(4) (2+) and S(2)N(2). The opposition of pi and sigma effects in the four-membered rings is compatible with height profiles of calculated NICS (nucleus-independent chemical shifts).     

Efficiency assessment of wastewater treatment plant based on SPMD sampling

The efficiency of treatment processes forboth municipal and industrial wastewater (treatment plant-Ostrava, Czech Republic) focused on persistent organic pollutants (POPs) was assessed. Semipermeable membrane devices (SPMDs) as a sampling system were applied. Exposed SPMDs were analyzed both for chemical contaminants of POPs and toxicity response. The chemical analyses of PAHs were made by HPLC-FLD, PCDD/Fs and PCBs were analysed by GC/MS/MS on GCQ or PolarisQ (Thermoquest). Ecotoxicity data on chlorococcal alga Desmodesmus subspicatus (Scenedesmus subspicatus) and luminescent bacteria Vibrio fischeri are presented here. All toxicity data as effective volume Vtox are expressed. The results show good treatment ability of the treatment plant and proved used system as an appropriate tool for efficiency assessment of treatment and/or decontamination processes.     

Numerical simulation of inductive method for determining spatial distribution of critical current density

The inductive method for measuring the critical current density j_C in a high-temperature superconducting (HTS) thin film has been investigated numerically. In order to simulate the method, a non-axisymmetric numerical code has been developed for analyzing the time evolution of the shielding current density. In the code, the governing equation of the shielding current density is spatially discretized with the finite element method and the resulting first-order ordinary differential system is solved by using the 5th-order Runge–Kutta method with an adaptive step-size control algorithm. By using the code, the threshold current I_T is evaluated for various positions of a coil. The results of computations show that, near a film edge, the accuracy of the estimating formula for j_C is remarkably degraded. Moreover, even the proportional relationship between j_C and I_T will be lost there. Hence, the critical current density near a film edge cannot be estimated by using the inductive method.     

Tuning the Structure and Properties of N-doped Positively Charged Polycyclic Aromatic Hydrocarbons

A detailed study of the geometry, aromatic character, electronic and magnetic properties for a series of positively charged N-doped polycyclic aromatic hydrocarbons (PAHs) was performed. Magnetic properties of the examined molecules were analyzed by means of the magnetically induced current density calculated using the diamagnetic-zero version of the continuous transformation of origin of current density (CTOCD-DZ) method. The comparative study of the local aromaticity of the studied molecules was performed using several different indices: energy effect (ef), harmonic oscillator model of aromaticity (HOMA) index, six centre delocalization index (SCI) and nucleus independent chemical shifts (NICS). The presence of N-atoms in the inner rings was found to cause a planarity distortion in the studied N-doped systems. The geometric changes and charged nature of the studied N-doped systems do not significantly influence the current density and the local aromaticity distribution in comparison with the corresponding parent benzenoid hydrocarbons. The present study demonstrates how quantum chemical calculations can be used for rational design of novel PAHs and for fine tuning of their properties.