Surface solid-state interactions in copper-nickel-cement catalysts for hydrogenation of oxygen

The surface phase composition of alumocalcium cement-supported CuO and CuO-NiO catalysts prepared by chemical mixing has been studied using the method of thermo-vacuum curves of electric conductivity. The deactivation of these catalysts due to overheating to 800 °C under conditions of hydrogenation of oxygen is rationalized by the partial extraction of CuO (and NiO) from the stabilizing structure of the support solid solutions and by sintering of the extracted oxides and the reduced metallic phase. Complete regeneration of the CuO-NiO-talum catalysts can be achieved if a considerable amount (20%) of copper hydroxocarbonate is added.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1559–1562, September, 1994.     

Effect of Oxygen Redistribution on the Normal and Superconducting Properties of Yttrium High‐Temperature Superconductors

An anomaly is found in the vicinity of T_max 560$ K on electric resistance versus temperature curves for yttrium hightemperature superconductors of the 123 phase. Xray phase analysis suggests a structural phase transition in the vicinity of T_max due to oxygen redistribution in the mobile sublattice of this compound. Investigation of samples with Y partially replaced by Ca has shown that the structural phase transition does not depend on carrier concentration in the conduction band.     

Electric parameters of photosystem II particles — electric light scattering study

Electric light scattering and microelectrophoresis were applied to investigate the electric moments (permanent dipole moment and electric polarizability and electrophoretic mobility of envelope-free chloroplasts and photosystem II (PS II particles. The effect of the removal of the extrinsic polypeptides (18, 24 and 33 kDa) on the electric moments was also studied. A significant difference was observed between the orientation behaviour of chloroplasts and PS II preparations. The data indicate that the permanent and induced dipole moments contribute to the orientation of the PS II particles, whereas chloroplasts possess induced dipole moment only.

NaCl and Tris treatments of PS II preparations influence both the transverse permanent dipole moment and the electric polarizability of PS II particles. The increase in the electrophoretic mobility of PS II particles on removal of the extrinsic proteins corresponds to an increase in the electric polarizability value, demonstrating its interfacial nature.     

W／O型微乳液活化能和导电机理研究

电导行为是微乳液的重要性质之一。自Lagourette和Lagues发现了W/O型微乳液电导渗透(Percolation)现象后,人们开始了微乳液导电机理的研究。较流行的观点认为,界面层中表面活性剂分子的阴离子在微乳颗粒碰撞时发生跃迁而使W/O型微乳液具有导电性。     

Structure and Electric Conductivity of (La,Sr)(Ga,Mg)O3-α Solid Electrolyte

Electric conductivity, Raman spectra, and thermal expansion of La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 solid solution (LSGM1218) based on lanthanum gallate were studied at various temperatures, and Xray phase analysis was performed at room temperature. Dilatometric measurements showed that secondorder phase transitions occur at 775±10$ and 880± 20 K. The transition around 880 K is confirmed by Raman spectra and by a change in the conductivity activation energy in this temperature range. This transition is associated with a symmetry change in the oxygen sublattice.     

Towards advanced circuit board materials: adhesion of copper foil to ultra‐high molecular weight polyethylene composite

Polyethylene based composites are attractive materials for advanced circuit board applications because of their unique combination of properties: low dielectric constant and loss factor, light weight, high flexural modulus and low thermal expansion coefficient controlled in all spatial directions. This investigation describes a process to consolidate chopped fibers of ultra‐high molecular weight polyethylene concurrently with its bonding to a copper foil. Bonding is affected by a thin sheet of low‐density polyethylene, incorporating a crosslinking agent with a concentration gradient across the sheets thickness. In this single step process, the composite material is formed and bonded to the metal foil, achieving good adhesion without the use of extraneous glue. Copyright © 2002 John Wiley & Sons, Ltd.     

Moment characterization of localized orbitals

The parallel between orbital first and second electric moments and statistical first and second central moments is noted. Three measures of orbital spatial distribution in terms of their moments are proposed, and applied to the LMO's in a series of ten-electron hydrides. Consistent differences between bond and lone pair distributions are found. Using the statistical interpretation, for each LMO an effective solid angle around the central atom is postulated.     

Electric-field-driven deracemization.

We demonstrate, both theoretically and experimentally, that it is possible to use an electric field to drive the formation of macroscopic chiral (conglomerate) domains from an initially homogeneous fluid racemate. Field-induced segregation is exhibited in a fluid smectic liquid-crystal phase of a racemic mesogen, wherein enantiomerically-enriched domains are readily identifiable by their chiral electro-optical response. The sharp field-generated boundaries that form between opposite-handed domains broaden by diffusion in the absence of field, but reform rapidly if the field is switched on again, providing unambiguous evidence for the field-driven physical separation of enantiomers. A mean-field model successfully describes the steady-state and the dynamic evolution of conglomerate formation.     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.     

Double Electric Layer on Liquid Sn-Ga Alloy in Acetonitrile Solutions of Electrolytes

The structure of the double electric layer (DEL) on a liquid dropping Sn-Ga electrode containing 8 at. % of Sn is studied in acetonitrile (AN) solutions of electrolytes. It is shown that the transition from aqueous to AN solutions of electrolytes makes it possible to expand the region of investigation of parameters of DEL on an Sn-Ga electrode from negative charges to a zero charge and to small positive charges. As follows from the obtained data, throughout the entire interval of charges studied, an excess, as compared with an Hg electrode, chemisorption interaction (Sn-Ga)-AN is absent. It is established that the distance of the closest approach of AN dipoles to an ionic core increases upon going from Hg to Sn-Ga to Ga. The Ga, Bi-Ga, and Sn-Ga electrodes, which possess close values of the “electrochemical work function,” are used as an example to show that the metal-solvent chemisorption interaction increases with decreasing distance of the closest approach of its dipoles to the ionic core of the metal. The effect of this factor becomes stronger as the donor number of the solvent increases.