压缩剪切测试中载荷传递行为的数字光弹性研究

结合光弹性四步彩色相移法,提出改进的六步相移法来计算全场剪应力,对径压缩圆盘实验证实了该方法的正确性,并进一步研究了同质材料连接结构在压缩剪切测试中的层间剪切行为。实验结果表明:全场等色线条纹级数和剪应力连续分布且随载荷而增加;中线附近剪应力趋于零,而条纹级数为峰谷。在连接界面上的条纹级数和剪应力出现峰值,特别是在连接界面端部为最高,在最大载荷下可分别达3.5级和2.4MPa,是导致连接界面脱粘开裂的危险区域。连接结构通过层间剪应力进行应力传递,在连接界面上剪应力与外载基本保持平衡。     

计算机辅助光弹性应力分析

本文提出一种新的计算机辅助光弹性应力分析方法,它具有全电子记录、全自动应力场分析、光路简单等优点。相位技术的采用使数据精度大大提高。文中给出了几种实验光路以及提高图象质量的方法,用对经受压圆盘光弹实验证明了方法的可行性。     

A Discrete Algorithm of Integrated Photoelasticity for Axisymmetric Problems

By measuring stresses in cylinders with no stress gradient in axial direction, the cross-section of the cylinder may be considered as consisting of concentric rings in each of which the stresses are constant. Axial stress distribution in the cylinder is determined stepwise starting with the outermost ring (the so-called onion-peeling method). This paper generalizes the onion-peeling method for the case of axisymmetric stress distributions when stress gradient in the axial direction is present. Measurement of the integrated isoclinic and optical retardation is carried out in two parallel sections which are perpendicular to the specimen axis, Δz apart from each other. The distributions of the axial stress and shear stress are determined directly from the measurement data, using linear approximation of integrated photoelasticity. Other stress components are determined using the equilibrium equation and the compatibility equation (if stresses are due to external loads) or using the generalized sum rule (if residual stresses in glass are measured). The method is less sensitive to measurement errors than the Abel inversion. In comparison with the polynomial approximation of the stress distributions, the onion-peeling method gives more adequate results if stress distribution is not smooth. The paper is illustrated with several applications.     

用流体双折射的位相差积分法定量分析具有对称平面的三维流场

本文对流体双折射方法做了简单的回顾。用位相差积分理论导出了具有对称平面双折射介质所适用的公式。作为实例,我们定量分析了扩张和收缩管中的剪应变率分布。     

Photoelastic Method for Analyzing Residual Stresses in Compact Disks

The issues of size and shape stability are especially important in modern high technologies, in particular, in the compact disk technology. Stability in this case is substantially affected by residual stresses that occur in disks because of the imperfection of their production process. The objective of the present study was to develop a simple optical method to estimate the stress state of compact disks.     

Stress Concentration in an Orthotropic Plate with a Circular Hole under Dynamic Loading

The paper sets forth a photoelastic method for the determination of the dynamic stress concentration factor near a hole in an orthotropic plate. The stress distribution at the periphery of a circular hole is analyzed. The stress concentration factors for orthotropic and isotropic plates under dynamic and statical loading are compared     

Dynamic photoelastic study of wave fields in elastic plates with stress concentrators

The method of dynamic photoelasticity is used to study the dynamic failure of structural members in the form of plates with a curvilinear (circular or elliptic) hole and an isolated crack under impulsive loading. The time-dependences of the stress intensity factors and the crack tip velocity are investigated for two types of models __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 12, pp. 84–92, December 2005.     

数字图像处理技术用于等倾线条纹的处理

本文利用数字图像处理技术,对光弹性条纹进行处理,实现了等倾线与等差线的分离,提高了等倾线的测试精度。同时利用微机系统进行主应力迹线的绘制,提高了主应力迹线绘制的准确性.     

相移法获取三维光弹特征相位差的方法

对于三维光弹模型,次主应力及其方向沿入射光连续变化,根据光学等效的原理,可以将三维光弹模型等效为一个包含线性相位延迟器和旋光器的光学模型。在集成光弹法中,对于每一个测量点,研究者必需通过实验获取三个特征参数。提出了一种用于确定集成光弹中全场特征相位差的五步相移法,给出了偏振光场中元器件的设置方法,并运用Jones算子推导出相移法得出的光强公式。最后使用斜射法对径向受压圆盘进行实验,验证了方法的有效性。     

Low false reject rate and false accept rate multi-step fire detection method

This paper proposes an efficient fire detection method for intelligent monitoring of self-service banks. This method includes the following steps: motion region detection, color-based fire detection and fire region refinement. These steps are as follows. First, the method uses four Gaussian distributions to construct an adaptive background model of the scene, and exploits this model to obtain the moving regions of the image. Second, the method uses RGB color and HSI color to determine whether the moving regions are fire candidates or not. These two steps are able to detect almost all of the true fire regions but it also takes a portion of non-fire regions as the fire. Third, the proposed frame difference procedure and the distance of two fire regions of two adjacent frames to eliminate the false fire regions obtained using the first two steps. The experimental results show that the proposed method performs very well in small-scale fire detection. The false reject rate (FRR) and false accept rate (FAR) of our method are 10.4%, and 6.02%, respectively.