复杂三维结构物的光弹性实验研究

应用光弹性原理和方法，根据有关相似原理，对研究对象的几何尺寸进行缩比、模型设计及加工成型．然后将模型在危险载荷作用下，进行应力冻结、切片及应力分析．确定了模型不同截面上的应力及其变化规律，为优化设计和调整数值计算方法提供了有价值的依据．     

用动光弹性法研究材料引入的分配层对应力波传播的影响

本文用动态光弹性模拟试验分析方法，观察和分析研究了材料不同的分配层对应力波在结构中传播的影响，比较分析了冲击荷载产生的应力波在洞室结构顶部的传播及相互过程，得到指定点处的应力—时间关系曲线，为结构震塌机理的进一步的研究和防护结构的改进提供参考。     

Experimental study on crack curving propagation in bending beams under impulsive load

Dynamic fracture behaviour of crack curving in bent beams has been investigated. In order to understand the propagation mechanism of such cracks under impact, an experimental method is used that combines dynamic photoelasticity with dynamic caustics to study the interaction of the flexural waves and the crack. From the state change of the transient stresses in polymer specimen, the curving fracture in the impulsively loaded beams is analyzed. The dynamic responses of crack tips are evaluated by the stress intensity factors for the cracks running in varying curvature paths under bending stress wave. The project supported by the National Natural Science Foundation of China and the Scientific Commission of Yunnan Province of China     

Fringe multiplication by reflection

A new method of fringe multiplication is presented in this paper.The method is simpleand applicable.Only one polarizer and one quarter-wave plate are adopted to get fringemultiplication by reflection.     

Measurement of surface topography by RGB Shadow-Moiré with direct phase demodulation

In this paper we present the application of a direct demodulation method for the measurement of surface topography by means of Shadow-Moiré. In our set-up, we use three LEDs (with green, red and blue peak wavelengths) to illuminate the grating. Due to the different position of these light sources, a polychromatic Shadow-Moiré fringe pattern is produced, which can be described as the superposition of three monochromatic (red, green and blue) fringe patterns. Taking the image of this polychromatic fringe pattern with a RGB CCD camera, we get a monochromatic fringe pattern stored at each RGB channel of the CCD. The direct demodulation algorithm employed uses these fringe patterns to calculate the wrapped phase map. After unwrapping the phase map using a standard multi-grid technique, we implemented an automatic procedure to detect the area of interest of the phase map by removing low modulation zones and to calculate the absolute value of the phase. In this way it is possible to determine the topography of a surface with a single RGB snapshot maintaining a simple experimental set-up, which is an important feature, especially for the study of dynamic phenomena such as deformations. We present the experimental results obtained after measuring different objects with both smooth and rough surface textures.     

一种改进的RGB Hough车牌校正定位算法

车牌的定位对车牌识别的成功率起到决定性作用。为了通过校正倾斜的车牌提高车牌在倾斜情况下字符识别的准确率,针对小型车蓝底白字的车牌提出了一种基于RGB色彩空间与Hough变换的车牌校正定位算法。对无倾斜情况的车牌可以直接定位,对于存在明显倾斜的车牌可以实现倾斜校正并定位。对车牌无倾斜情况的定位准确率为93%,倾斜车牌的定位准确率为88%。     

工艺应力模拟技术中的热相似律

分析了热处理及焊接的热过程，从热传导的基本方程及边界条件出发，结合不同工艺过程的特点，提出了用光弹法模拟整体淬火热应力，表面淬火热应力和焊接过程热应力及残余应力的热相似律。     

RGB Small Molecules Based on a Bipolar Molecular Design for Highly Efficient Solution‐Processed Single‐layer OLEDs

In this paper, we describe a bipolar molecular design for small molecule solution‐processed organic light emitting diodes (OLEDs). Combining the rigidity of the conjugated emissive cores and the flexibility of the peripheral alkyl‐linked carbazole groups, two series of highly efficient bipolar RGB (red, green, blue) emitters have been synthesized and characterized. The emissive cores are composed of electron‐withdrawing groups; the carbazole groups endow the materials electron‐donating units. Such bipolar structures are advantageous for the carrier injection and balance. Four peripheral carbazole groups are introduced in T‐series materials (TCDqC, TCSoC, TCBzC, TCNzC), and another four in O‐series materials (OCDqC, OCSoC, OCBzC, OCNzC). With the single‐layer device configuration of ITO/PEDOT:PSS/emitting layer/CsF/Al, two green devices exhibited excellent performance with a maximum luminescence efficiency of over 6.4 cd A^?1, and a high maximum luminance of more than 6700 cd m^?2. In addition, compared with the T‐series, the luminescence efficiency of blue and red devices based on O‐series materials increased from 1.6 to 2.8 cd A^?1 and 0.2 to 1.3 cd A^?1, respectively. To our knowledge, the performance of the blue device based on OCSoC is among the best of the blue small‐molecule solution‐processed single‐layer devices reported so far.     

模型外载与自重并存变动外载的光弹性分析法

提出一个变动模型外载，分析大模型在外载与自重共同作用时的尤弹性法。它与用离心力模拟自重试验的传统方法完全不同，只要在大模型上变动外载，就可以获得上述两种载荷共同作用下的应力分析结果。此法避免了用离心模型自重受模型尺寸限制等诸多因素影响的缺点，为自重不可的大型复杂空间工程结构模型试验应力分析提出了一条新的途径。文中给出了本方法的基本原理及其简要的实验验证和工程应用结果。     

Scanning schemes in white light Photoelasticity – Part I: Critical assessment of existing schemes

The use of white light based Three Fringe Photoelasticity (TFP)/RGB Photoelasticity has gained importance in the recent years. With recent advances in TFP, it is possible to resolve fringe orders upto twelve. The main advantage of this technique is that it requires only a single image for isochromatic demodulation, which makes it suitable especially for problems where recording multiple images is difficult. The accuracy of isochromatic data obtained using TFP/RGB Photoelasticity is dependent on the scanning scheme used to refine the data, which is necessary to incorporate fringe order continuity. In this paper, the existing scanning schemes are critically evaluated for their ability to scan the entire model domain, influence of seed point selection and noise propagation. The scanning schemes are assessed using four problems of increasing level of geometric complexity – Circular disc under compression (simply connected), bi-axially loaded cruciform specimen with an inclined crack, a thick ring subjected to internal pressure and a finite plate with a hole (multiply connected).