双极性固态直线变压器驱动器的研制

在针对脉冲电磁场肿瘤消融的应用场合,双极性脉冲比单极性脉冲效果更均匀,而要产生ns级前沿的双极性高压纳秒或亚微秒脉冲难度大,电磁干扰强,控制要求更高。设计了一台双极性全固态直线型变压器驱动源(SSLTD),双极性SSLTD由结构完全相同的LTD模块经过副边绕组反向串联构成,在负载上实现双极性窄脉冲。双极性SSLTD输出波形稳定的脉冲的关键在于磁芯复位,通过电阻负载实验,重点对比分析了复位电流的形式对复位效果的影响,以及采用直流复位时幅值、脉宽、正负脉冲时间间隔、单级模块中开关管并联数量、复位电流大小对双极性SSLTD输出的影响。实验结果表明,所设计的双极性SSLTD能够在500 Ω负载上稳定产生重频双极性纳秒脉冲,输出电压0～±5 kV可调,脉宽200～400 ns可调,正负脉冲时间间隔0～1 ms可调,上升沿和下降沿20～50 ns;反向串联的直流复位电路结构简单、复位效果好。该脉冲源使用模块化设计,结构紧凑,电气绝缘要求较低,可灵活输出双极性、正极性与负极性高压亚微秒脉冲。     

Broadband excitation pulses for high‐field solid‐state nuclear magnetic resonance spectroscopy

In nuclear magnetic resonance spectroscopy, experimental limits due to the radiofrequency transmitter and/or coil means that conventional radiofrequency pulses (“hard pulses”) are sometimes not sufficiently powerful to excite magnetization uniformly over a desired range of frequencies. Effects due to nonuniform excitation are most frequently encountered at high magnetic fields for nuclei with a large range of chemical shifts. Using optimal control theory, we have designed broadband excitation pulses that are suitable for solid‐state samples under magic‐angle‐spinning conditions. These pulses are easy to implement, robust to spinning frequency variations, and radiofrequency inhomogeneities, and only four times as long as a corresponding hard pulse. The utility of these pulses for uniformly exciting ¹³C nuclei is demonstrated on a 900 MHz (21.1 T) spectrometer. Copyright © 2012 John Wiley & Sons, Ltd.     

Propagation of extremely short pulses in a graphene–boron nitride bilayer

In this study we investigate the propagation of extremely short optical pulses in a thin film formed by a graphene grown on a boron nitride substrate. Conduction electrons of the system are described on the basis of the long-wavelength effective Hamiltonian in the case of low temperatures; the electromagnetic field being taken into account within the framework of the classical Maxwell equations. The time evolution of the pulse?s shape for different speeds and maximum amplitudes of an extremely short pulse is analyzed.     

Using random forest to classify T-cell epitopes based on amino acid properties and molecular features

T-lymphocyte (T-cell) is a very important component in human immune system. T-cell epitopes can be used for the accurately monitoring the immune responses which activation by major histocompatibility complex (MHC), and rationally designing vaccines. Therefore, accurate prediction of T-cell epitopes is crucial for vaccine development and clinical immunology. In current study, two types peptide features, i.e., amino acid properties and chemical molecular features were used for the T-cell epitopes peptide representation. Based on these features, random forest (RF) algorithm, a powerful machine learning algorithm, was used to classify T-cell epitopes and non-T-cell epitopes. The classification accuracy, sensitivity, specificity, Matthews correlation coefficient (MCC), and area under the curve (AUC) values for proposed method are 97.54%, 97.22%, 97.60%, 0.9193, and 0.9868, respectively. These results indicate that current method based on the combined features and RF is effective for T-cell epitopes prediction.     

Einfluß der Nachimpulse des Photosekundärelektronenvervielfachers bei Flüssigkeitsszintillationszählungen

Der Einfluβder Nachimpulse einiger Exemplare des Vervielfachertyps S 12 FS 35 vom VEB Carl Zeiss Jena auf die Flüssigkeitsszintillationszählung wurde in Abhängigkeit von verschiedenen Parametern untersucht. Daraus ergeben sich praktische Hinweise zur Vermeidung von Fehlmessungen durch Nachimpulse, die bei absoluten Aktivitätsbestimmungen mit dem Flüssigkeitsszintillationszähler (z. B. Meβkopf Nr. 25510 der Firma E. Zimmermann, Leipzig) unbedingt zu berücksichtigen sind.     

Parameters optimization and phase analysis of decentered grating stretchers

A decentered grating stretcher for chirped pulse amplification systems is analyzed with oblique meridional ray tracing. Several formulae and conclusions are developed to design and optimize the stretcher. On basis of an analytical phase expression with an explicit significance, the expressions of the second-, third- and approximate fourth-order phases at the central wavelength are presented with only independent variables. These simplify the parameter design for this kind of stretcher and the phase compensation design of the whole amplifier system, which has been demonstrated with a practical example.     

Influence of oxygen flow rate on the surface chemistry and morphology of radio frequency (RF) magnetron sputtered zinc oxide thin films

Zinc oxide thin films were deposited, by radio frequency magnetron sputtering, on heated and unheated substrates. The oxygen flow rate was varied during deposition, and its effects on the structural and chemical properties of the films were investigated. The films had oriented c‐axis growth with nano‐crystallite size. Their surfaces manifested columnar microstructure, with a surface roughness that was suppressed by the introduction of oxygen. Chemical analysis showed that deposition under an oxygen atmosphere resulted in substantial reduction of oxygen vacancies, with a corresponding incorporation of chemisorbed species. Copyright © 2013 John Wiley & Sons, Ltd.     

Biselective refocusing pulses and the SERF experiment

The SERF experiment is a variant of the homonuclear J-resolved experiment, in which a single coupling constant is measured. It consists of a single chemical shift selective excitation that is followed by a biselective spin echo. Recent articles mention the existence of artefacts in SERF spectra that are supposedly related to pulse imperfections. This article presents a detailed study of the biselective refocusing pulses. It also reports a method for predicting the position and amplitude of the expected and unexpected 2D spectral peaks in SERF spectra. Artefacts can be partially eliminated by phase cycling or by the introduction of static field gradient pulses in the acquisition sequence. A procedure to obtain of pure absorption peaks in SERF spectra is proposed.     

Fabrication of Cu2ZnSn(SxSe1−x)4 thin film solar cell by single step sulfo-selenization of stacked metallic precursors

We have synthesized an efficient Cu₂ZnSn(S_xSe_1−x)₄ (CZTSSe) absorbers by using single-step rapid thermal sulfo-selenization process of sputtered stack metallic precursor (Zn/Sn/Cu) films. The structural and morphological studies confirm that the suitability of the rapid thermal sulfo-selenization process for the synthesis of a CZTSSe absorber without any secondary phases with large grains. The annealing atmosphere with a mixed-chalcogen source enhances the grain growth of the CZTSSe absorber as compared with pure Cu₂ZnSnS₄ (CZTS) and Cu₂ZnSnSe₄ (CZTSe) absorbers. The CZTSSe thin film solar cell shows the best conversion efficiency of ∼7%.