高功率激光稳定腔选模分析

讨论了在有限菲涅耳数时，稳定凹－凸腔的高功率激光选模特性，研究表明当稳定凹－凸腔工作在临近界稳区时，基模体积显著提高，具有良好的选模效果。     

高功率横流CO2激光器高反膜耦合窗口ZnSe热形变理论和实验研究

给出高功率横流ＣＯ２激光器高反膜红外膜红外耦合窗口ＺｎＳｅ的热形变理论和实验。在合理近似条件下，导出ＺｎＳｅ窗口温度分布和热形变的理论表达式。理论和实验相符。     

高重复率XeCl准分子激光器的放电特性

本文报道紫外预电离放电泵浦的高重复率XeCl准分子激光器的放电特性,分析了放电参数的改变对放电过程的影响.最佳转换效率达2.2%.     

1.2 kW C波段固态高效率GaN微波源研制

针对传统大功率Si,GaAs固态微波源效率低和高温度性能差的不足,采用导热系数优良的宽禁带GaN单元功放模块集成、低损耗同轴波导径向空间功率合成方法,研制出一种1.2 kW全固态C波段高效率宽禁带GaN微波源。实验结果表明：该方法实现了大功率固态微波源高效率及连续长时间高温风冷散热运行,系统安全可靠。单路功放模块集成6位移相器,移相精度5.6,增益35 dB,输出功率大于31 W。系统连续波输出功率1.2 kW ,总效率30%,谐波抑制-54.8 dBc;杂散-63.69 dBc,相位噪声-94.03 dBc/Hz@1kHz。     

Assessing the relationship between the inter-rod coupling and the efficiency of piezocomposite high-intensity focused ultrasound transducers

The electroacoustic conversion efficiency of the ultrasonic transducer is a critical performance index for high-power applications. The material properties, volume fraction (VF) and aspect ratio (AR) are typically regarded as the design parameters of the piezocomposite transducer. We hypothesized that the spacing between piezoelectric rods was also a dominant factor. Therefore, the inter-rod coupling effects on the efficiency of 1–3 piezocomposite ultrasonic transducers were investigated in this study. The efficiencies of six flat and three curved 1.0 MHz PZT4 epoxy composite transducers with different geometric parameters were measured. Finite element transient analyses of the inter-rod electrical-mechanical coupling in the composites were carried out to explain the measured results. The experimental results showed that for 0.47 AR, the 79% VF transducers had lower efficiency than the 64% VF and 53% VF transducers. For 0.19 AR, the efficiency of the 59% VF transducer was not greater than the efficiency of the 39% VF transducer. Numerical analyses demonstrated that the positive peak voltage induced by the coupling of the side rods was more than twice the level induced by the coupling of the diagonal rods for any spacing. The diagonal coupling voltage peak did not change for spacings larger than 0.2 mm. Moreover, for spacings of 0.05 and 0.1 mm, the inter-rod coupling caused 24% and 20% waveform shifts of the driving voltage, respectively, while the 0.2 mm spacing coupling caused a 14% reduction in the amplitude of the driving voltage. As a result, the asymmetry of the driving voltage degraded the efficiency of the composite transducers and became more severe when the spacing was decreased. We concluded that the efficiency loss induced by inter-rod coupling as a function of spacing should be considered when designing piezocomposite transducers.     

一类非线性T-S模糊时滞系统的鲁棒观测器型H∞控制器设计

针对同时具有分布时滞和非线性项的T-S模糊时滞系统, 提出观测器型H_∞输出反馈控制器设计方法. 首先, 以非线性矩阵不等式形式给出时滞相关的满足H_∞性能指标的稳定性分析充分条件; 其次, 给出与所给稳定性条件等价的线性矩阵不等式条件. 在此基础上, 讨论带有非线性项的观测器型H_∞输出反馈控制的可解问题. 最后, 通过仿真算例说明控制器设计方法的可行性. 关键词： T-S模糊系统 分布时滞 观测器型输出反馈控制 H_∞控制')" href="#">H_∞控制     

Quantum feedback control: how to use verification theorems and viscosity solutions to find optimal protocols

While feedback control has many applications in quantum systems, finding optimal control protocols for this task is generally challenging. So-called ‘verification theorems’ and ‘viscosity solutions’ provide two useful tools for this purpose: together they give a simple method to check whether any given protocol is optimal, and provide a numerical method for finding optimal protocols. While treatments of verification theorems usually use sophisticated mathematical language, this is not necessary. In this article we give a simple introduction to feedback control in quantum systems, and then describe verification theorems and viscosity solutions in simple language. We also illustrate their use with a concrete example of current interest.     

Brain oscillatory activity during motor imagery in EEG-fMRI coregistration

The purpose of the present work was to investigate the correlation between topographical changes in brain oscillatory activity and the blood oxygenation level-dependent (BOLD) signal during a motor imagery (MI) task using electroencephalography (EEG) and functional magnetic resonance imaging (fMRI) coregistration.     

Feedback method of the noise suppression in wave-mixing amplifiers based on non-linear materials with photorefractive response in a reflection grating configuration

In the photorefractive wave-mixing system, fluctuation in the signal beam intensity of the photorefractive output with a reflection grating has been analyzed by employing pump feedback method. In this method, fluctuations of the photorefractive wave-mixing process not only induce the intensity fluctuation of the mixing waves but also induce phase fluctuation of the mixing waves. Thus, the phase of the pump and signal beams at the output surface fluctuates in time around a mean value. Using such a positive feedback method of a pump beams, the relative fluctuation in the photorefractive output signal beam intensity with respect to its mean intensity can be minimized significantly without reducing its mean intensity. The factors that control the fluctuation in the signal beam intensity, such as the phase fluctuation of the output pump beam, absorption strength of the material and the feedback reflectivity of the cavity mirrors, on the relative fluctuation of the output signal intensity in the photorefractive wave-mixing systems have been studied in detail. It has been found that the fluctuation of the output signal intensity relative to its mean intensity in the photorefractive wave-mixing system can be suppressed to larger extent by taking lower value of feedback reflectivity of the cavity mirrors which could exist at a higher value of absorption strength of the photorefractive materials.