Penetration of plasma surface modification. I. Cf4 and C2F4 glow discharge plasmas

Plasma treatment of a polymeric surface could involve at least three major mechanisms: (1) direct interaction of reactive species in the low-temperature plasma state with the surface (line of sight irradiation effect), and (2) chemical reactions of plasma-induced reactive species with the surface, and (3) reactions among reactive species and the surface (plasma polymerization). The first and the third effects are considered to be limited to the surfaces which directly contact with plasma (glow). The second effect is not limited to the surfaces that contact with plasma state but can penetrate beyond the plasma zone by diffusion. Using an assembly of fibers, of which only the top layer contacts with plasma (glow), the penetration of chemical changes caused by plasma exposure was investigated. Results indicate that the fluorination effect (incorporation of fluorine-containing moieties on the surface of polymeric substrate) penetrates through a considerable thickness of the assembly of fibers, depending on the porosity (gas permeability) of the system. Chemical reactions of plasma-induced (chemically) reactive but nonpolymerizing species with the substrate fibers seems to predominate. The direct interactions of energetic species, such as ions, electrons, and electronically excited species, with polymeric surfaces seems to play relatively minor roles in the plasma treatment investigated. The major role of plasma, in this case, seems to be creating such chemically reactive species. © 1994 John Wiley & Sons, Inc.     

Difference in Conversions Between Dimethyl Sulfide and Methanethiol in a Cold Plasma Environment

This study compared the conversion of two malodorous substances, dimethyl sulfide (CH₃SCH₃, DMS) and methanethiol (CH₃SH) in a cold plasma reactor. The DMS and CH₃SH were successfully destroyed at room temperature. DMS decomposed less than CH₃SH at the same conditions. In oxygen-free condition, CS₂ and hydrocarbons were the major products, while SO₂ and CO_x were main compounds in oxygen-rich environments. The DMS/Ar plasma yielded more hydrocarbons and less CS₂ than that of CH₃SH/Ar plasma. In the CH₃SH/O₂/Ar plasma, rapid formation of SO and CO resulted in the yields much more amounts of SO₂ and CO₂ than those in the DMS/O₂/Ar plasma; and remained only a trace of total hydrocarbons, CH₂O, CH₃OH, CS₂, and OCS. The major differences between the reaction mechanisms of DMS and CH₃SH were also proposed and discussed.     

Modeling of an inductively coupled plasma at reduced pressures

Plasma sintering experiments in this laboratory at reduced pressures revealed efficient heating of the ceramic sample due to recombination of dissociated and/or ionized species on the surface. For establishing a model for this plasma sintering process, it is necessary to first consider the plasma itself. Therefore, a suitable model for an RF inductively coupled plasma has been developed considering reduced pressures. As the pressure decreases, the electron density also decreases at a fixed electron temperature, causing substantial deviations from chemical equilibrium. Due to the poor collisional coupling between electrons and heavy particles at reduced pressures, large deviations from kinetic equilibrium have also to be expected. The model is based on a rotationally symmetric plasma contained in a quartz tube. The power level ranges from 1.5 to 3 kW and the operating pressure is varied from 1 to 0.01 atm. Both deviations from chemical and kinetic equilibrium are included in this model. Thermodynamic and transport properties for two-temperature plasmas are used for this modeling work. The results indicate that for pressures below 0.1 atm, there is a strong ambipolar flux of charge carriers to the confining walls, leading to significant variations of the temperature across the tube. The electron temperature increases rapidly as the pressure decreases, whereas the heavy-particle temperature decreases.     

Time domain identification and ranking of noise sources in a pneumatic nail gun

This paper investigates the noise sources in a pneumatic nail gun. The study combines two complementary experimental approaches. The first uses simultaneous data observation, with sound, acceleration and air pressure signals simultaneously recorded in conjunction with a nail gun motion high speed video. This strategy allows the identification of the physical processes involved in the operation of the machine at different time instants, as well as the associated noise generation mechanisms. However, since multiple noise sources radiate at the same time, this observation technique is not sufficient for noise source identification and ranking. Thus, a second approach introduces a selective wrapping procedure, and the strategy assures a reliable classification of the noise sources. The investigation considers the following noise origins: the air exhaust, the machine body and the workpiece/worktable.     

Using random forest to classify T-cell epitopes based on amino acid properties and molecular features

T-lymphocyte (T-cell) is a very important component in human immune system. T-cell epitopes can be used for the accurately monitoring the immune responses which activation by major histocompatibility complex (MHC), and rationally designing vaccines. Therefore, accurate prediction of T-cell epitopes is crucial for vaccine development and clinical immunology. In current study, two types peptide features, i.e., amino acid properties and chemical molecular features were used for the T-cell epitopes peptide representation. Based on these features, random forest (RF) algorithm, a powerful machine learning algorithm, was used to classify T-cell epitopes and non-T-cell epitopes. The classification accuracy, sensitivity, specificity, Matthews correlation coefficient (MCC), and area under the curve (AUC) values for proposed method are 97.54%, 97.22%, 97.60%, 0.9193, and 0.9868, respectively. These results indicate that current method based on the combined features and RF is effective for T-cell epitopes prediction.     

Dynamics of plasma channel in a parallel-plate plasma gun

Lumped parameter models for describing dynamics of the plasma channel in a parallel-plate plasma gun are compared with the experimental results obtained from two plasma guns with different rail geometries. Comparison between the experiments and the numerical calculations reveals that the lumped parameter models can be utilized to describe the dynamic motion of the plasma channel quite well. Parametric study shows that minimizing the line inductance and increasing the charging voltage on a capacitor as well as minimizing the gas injection time for reducing the mass of the plasma channel are the key factors to increase the flow velocity of the plasma jet ejected from the plasma gun.     

Influence of oxygen flow rate on the surface chemistry and morphology of radio frequency (RF) magnetron sputtered zinc oxide thin films

Zinc oxide thin films were deposited, by radio frequency magnetron sputtering, on heated and unheated substrates. The oxygen flow rate was varied during deposition, and its effects on the structural and chemical properties of the films were investigated. The films had oriented c‐axis growth with nano‐crystallite size. Their surfaces manifested columnar microstructure, with a surface roughness that was suppressed by the introduction of oxygen. Chemical analysis showed that deposition under an oxygen atmosphere resulted in substantial reduction of oxygen vacancies, with a corresponding incorporation of chemisorbed species. Copyright © 2013 John Wiley & Sons, Ltd.     

An optimization method for designing SENSE imaging RF coil arrays

An optimization method in RF coil array design for SENSE imaging is described. Using this method the optimized RF coil geometries can be calculated numerically given the required SENSE imaging performance. Although this method can be applied to optimize the RF coil arrays for both 1D and 2D SENSE imaging, to demonstrate the potential applications of this method, we designed RF coil arrays for 2D SENSE imaging and compared their performance by simulation. An optimized 4-channel receive-only RF coil array designed for 2D SENSE imaging was implemented and tested to demonstrate the feasibility of the proposed technique. Imaging results showed reasonable agreement with the simulations, thus the method can be applied to RF coil array designs for SENSE imaging when optimum imaging performance is desired.     

4T split TEM volume head and knee coils for improved sensitivity and patient accessibility

Split RF coils offer improved patient access by eliminating the need for the coil to be slid over the region of interest. For unshielded birdcage coils, the presence of end ring currents necessitates a direct electrical connection between two halves of the coil. For high-field (>3T) shielded birdcage coils, both the shield and the coil must be split and reliably connected electrically. This problem can be circumvented by the use of split TEM volume coils. Since the elements of a TEM coil are coupled inductively, no direct electrical connection between the halves is necessary. In this work we demonstrate that the effects of splitting the shield for head and knee TEMs can be compensated for, and performance retained. For the knee, the improved access allowed the coil diameter to be reduced, enhancing the sensitivity by 15-20%.     

Fabrication of Cu2ZnSn(SxSe1−x)4 thin film solar cell by single step sulfo-selenization of stacked metallic precursors

We have synthesized an efficient Cu₂ZnSn(S_xSe_1−x)₄ (CZTSSe) absorbers by using single-step rapid thermal sulfo-selenization process of sputtered stack metallic precursor (Zn/Sn/Cu) films. The structural and morphological studies confirm that the suitability of the rapid thermal sulfo-selenization process for the synthesis of a CZTSSe absorber without any secondary phases with large grains. The annealing atmosphere with a mixed-chalcogen source enhances the grain growth of the CZTSSe absorber as compared with pure Cu₂ZnSnS₄ (CZTS) and Cu₂ZnSnSe₄ (CZTSe) absorbers. The CZTSSe thin film solar cell shows the best conversion efficiency of ∼7%.