Ultra-low emittance X-band photocathode RF gun

In this paper, we present the simulation results of a 1.6 cell X-band photocathode RF gun for ultra-low emittance electron beams. It will work at 9.3 GHz. The emittance, bunch length, electron energy and energy spread at the gun exit are optimized at bunch charge of 1pC using PARMELA. Electron bunches with emittance about 0.1 mm·mrad and bunch length less than 100 fs can be obtained from this gun. A PITZ type coupler is adopted in this gun and an initial simulation by MAFIA is also given in this paper.     

RF system design and measurement of HIRF-CSRe

An RF system for the CSRe （cooling storage experimental ring） is designed and manufactured domestically. The present paper mainly describes the RF system design in five main sections： ferrite ring, RF cavity, RF generator, low level system and cavity cooling. The cavity is based on a type of coaxial resonator which is shorted at the end with one gap and loaded with domestic ferrite rings. The RF generator is designed in the push-pull mode and the low level control system is based on a DSP＋FGPA＋DDS＋USB interface and has three feedback loops. Finally we give the results of the measurement on our system.     

Nanoscale formation mechanism of conducting filaments in NiO thin films

We have studied the nanoscale electrical properties of NiO thin films by using conducting atomic force microscopy (CAFM) to understand the mechanism of resistance change of the NiO thin films as we changed the applied voltage. We observed that inhomogeneous conducting filaments were generated by external voltage bias; in addition, some of the inhomogeneous conducting filaments were durable while some of them were not, and they disappeared. We deduced that the resistance change of the NiO thin films was related to inhomogeneous filamentary conducting paths generated by both Ni ions in thermodynamically unstable NiO and the existence of conducting filament segments generated by high voltage bias.     

介质膜滤波器色散特性的研究

采用信号处理的方法,对介质膜滤波器的滤波特性进行了详细的研究。介质膜滤波器是最小相位滤波器,它的幅度响应与相位响应之间存在希尔伯特变换规律,因此可以通过它的幅度响应重构它的相位响应,进而可以得到它的色散特性。为了验证理论分析,设计了射频调制法测试介质膜滤波器群速度延时的实验装置。实验测试了一个100GHz33信道的介质膜滤波器的群速度延迟。通过对实验结果与理论计算结果的对比分析,发现实验数据与理论分析吻合得比较好。最后,对介质膜滤波器的色散的特点进行了分析。     

二级轻气炮发射过程中前冲气体的初步研究

 在二级轻气炮发射过程中,靶室内的残存气体和绕行到弹丸前方的推进气体都有可能对实验结果造成影响。利用石英传感器测量并得到了二级轻气炮高速弹丸发射时前冲气体的压力信号,并计算得到了相应的压力。实验结果表明：二级轻气炮发射时确实存在前冲气体现象,但其压力幅值较小,约为10^-2 GPa量级,不会对高压物理实验的结果造成明显的影响。     

100-femtosecond MeV electron source for ultrafast electron diffraction

A near-relativistic 100-fs MeV electron beam is developed by using a photocathode rf gun for revealing the hidden ultrafast dynamics of intricate molecular and atomic processes in materials through experimentation of ultrafast time-resolved electron diffraction (UED). The transverse and longitudinal dynamics of femtosecond electron beam in the rf gun were studied theoretically by particle simulation. The growths of the emittance, bunch length and energy spread due to the rf and space charge effects were investigated by changing the laser parameters, field gradient and electron charge. The theoretical studies indicate that a 100-fs MeV electron beam with the transverse emittance of 0.1 mm mrad and the relative energy spread of 10⁻³–10⁻⁴ at bunch charge of 0.1–2 pC (10⁶–10⁷ electrons per pulse) is achievable for UED, in which the intensity is three orders of magnitude higher than that produced by the conventional dc or pulsed guns.     

射频反应磁控溅射制备ZnO薄膜的微结构及其光学性能

采用射频反应磁控溅射技术在石英和Si衬底上制备了高度c轴择优取向的ZnO薄膜,样品的氧氩流量比分别为10:40,20:40,30:40,40:40.利用X射线衍射仪、表面轮廓仪、原子力显微镜和紫外-可见分光光度计研究了样品的微结构与光学特性.研究表明:氧氩流量比为30:40的样品结晶质量最好.所制备的ZnO薄膜的可见光平均透射率均大于87;.随着氧氩流量比的增大,薄膜的透射率呈非单调变化,氧氩流量比为30:40的样品在可见光范围的平均透射率可达93;.光学带隙随着氧氩流量比的增大,先增大后减小.与块材ZnO的带隙(3.37 eV)相比,ZnO薄膜的带隙均变窄.     

脉冲调制射频功率测量中的标定及FFT分析方法研究

利用电压/电流探头和数字示波器实现了脉冲调制射频功率测量。电压/电流探头输出的电压、电流信号由数字示波器采集存储,电压、电流的幅值及相位差由FFT分析得到。在不同频率下,对电压、电流幅值及相位差进行标定,获得计算射频功率的标定参数。分析表明电压、电流相位差是影响标定系数的主要因素,FFT方法处理非稳态调幅电压、电流时存在问题,只有在零无功功率处才能获得可信的吸收功率。     

二维氧化锌纳米阵列的制备及光学吸收特性研究

采用漂移法,在玻璃衬底上制备出粒径分别为117,350和500 nm单层、大面积的聚苯乙烯胶体球掩膜板,在已制得的掩膜板上用射频磁控溅射的方法沉积一层氧化锌薄膜,最后用有机溶液四氢呋喃(THF)浸泡去除聚苯乙烯胶体球,获得不同粒径的二维氧化锌纳米团簇。通过扫描电子显微镜和能量色散X射线光谱仪对样品的形貌及成份进行表征,表明所制得样品为有序分布的蜂窝网状氧化锌纳米阵列。在室温下,通过吸收光谱仪测试样品在300～800 nm波长范围内的吸收光谱,结果表明对于具有不同尺寸晶粒的氧化锌纳米团簇样品,随着所采用的聚苯乙烯胶体球粒径的增大,即氧化锌纳米团簇粒径的增加,光吸收峰出现了宽化和红移;随着溅射时间的延长,即氧化锌薄膜膜厚的增加,光吸收率提高。此外,对氧化锌纳米团簇阵列的光吸收特性进行了基于离散偶极子近似的理论计算从而获得任意形状和尺寸粒子的吸收。目前,文献报道中用此理论计算各种形状的纳米金、银等金属的结果与实验结果相符,但是应用离散偶极子的近似理论计算氧化锌纳米颗粒的报道很少。应用此理论计算三角棱台形状的氧化锌光学吸收特性,根据氧化锌薄膜介电常数和膜厚的变化进行光吸收特性的模拟,并解释了实验结果。