聚乙烯拉伸过程中晶态变化及形变机理

用红外光谱和X-射线衍射研究了室温拉伸的聚乙烯,结果显示单斜晶存在于室温拉伸的聚乙烯中。对Hendra等关于拉伸过程机理的“微熔融”理论及其所根据实验结果提出异议,而本文的,实验结果支持了Peterlin模型。     

Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

TiSiW12O40/TiO2催化合成苹果酯

以固载杂多酸盐TiSiW12O40/TiO2为多相催化剂，通过乙酰乙酸乙酯和乙二醇反应合成了苹果酯，探讨TiSiW12O40/TiO2对缩酮反应的催化活性，较系统地研究了原料量比，催化剂肜量，反应时间诸因素对产品收率的影响，实验表明：TiSiW12O40/TiO2是合成苹果酯的良好催化剂，在n(乙酰乙酸乙酯）：n(乙二醇）＝1：1．5，催化剂用量为反应物料总质量的1．0％，环己烷为带水剂，反应时间50min的优化条件下，苹果酯的收率可达84．1％。     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.     

1H and 13C assignments of two new triterpenes from Cladocolea grahami

The structure elucidation and 1H and 13C assignments of the new triterpenes 3beta-palmitoxy-7beta-hydroxyolean-12-ene (1) and its hydrolysis product 3beta,7beta-dihydroxyolean-12-ene (2) and 3beta-sn-glyceroyl-(1'-palmitoxy)urs-12-ene (3), isolated from the aerial parts of Cladocolea grahami (Loranthaceae), are reported.     

A Novel Oxidative N-Demethylation of 12-Membered Macrolide with Lead Tetraacetate

Erythromycin has been extensively used in the treatment of bacterial infections for over 50 years1. In addition to the antimicrobial effect, the quite unique antiinflammatory activity of the erythromycin derivatives has attracted much attention as new the…     

New bioactive triterpenoid from Oldenlandia cantonensis How

A new pentacyclic triterpenoid, urs-12-en-29α-oic acid-3β-ol (1), was obtained from the ethanol extract of Chinese herb Oldenlandia cantonensis How. The structure was elucidated by spectroscopy methods, including nuclear magnetic resonance (NMR) (1D and 2D), infrared spectroscopy (IR), and mass spectrometry (MS). 1 exhibited significant inhibitory activity against the human DNA topoisomerase I (hTopo I), the cancer cell lines BEL-7402 and MCG-803, with the IC₅₀ values 12.0, 6.5, and 8.0 μg/mL, respectively. The volatile oil, the fraction of petroleum ether: EtOAc = 20:1 (V/V) on Si gel chromatography, was also quantitatively analyzed by gas chromatography mass spectrometry (GC-MS). As a result, 60 compounds were identified. Among them, the long chain aliphatics, terpenes and steroids, as the representative structure type, were found with percentages of 36.16%, 6.42% and 9.28%, respectively. Translated from Chinese Journal of Applied Chemistry, 2006, 23(8): 871–874 [译自: 应用化学]     

Differential pulse voltammetric determination of P(V) following adsorptive accumulation of alpha-[PMo(12)O(40)](3-) on a polypyrrole-modified glassy carbon electrode

On the basis of the formation and pre-concentration of an α-Keggin-type [PMo₁₂O₄₀]³⁻ complex, a novel voltammetric method was developed for the determination of trace levels of P(V). The α-[PMo₁₂O₄₀]³⁻ complex was formed by heating a 5×10⁻⁴ M Mo(VI)-0.2 M HCl-40% (v/v) CH₃CN system containing a trace amount of P(V) at 70 °C for 30 min. During the electrochemical polymerization of pyrrole in the α-[PMo₁₂O₄₀]³⁻ solution, the α-[PMo₁₂O₄₀]³⁻ complex was accumulated into the polypyrrole film on a glassy carbon electrode. The differential pulse voltammetric peak current due to the α-[PMo₁₂O₄₀]³⁻ complex incorporated in the polypyrrole film was linearly dependent on the P(V) concentration in the range of 5×10⁻⁹-5×10⁻⁷ M; a detection limit of 2×10⁻⁹ M was achieved.     

TiSiW12O40/TiO2催化合成己酸异戊酯

报道了以固载杂多酸盐TiSiW12O40/TiO4为多相催化剂，通过己酸和异戊醇反应合成了己酸异戊酯，探讨了TiSiW12O40/TiO4对酯化反应的催化活性，较系统地研究了醇酸摩尔比，催化剂用量，反应时间诸因素对收率的影响，实验表明：TiSiW12O40/TiO4是合成己酸异戊酯的良好催化剂，在n(醇）：n(酸）＝1．6：1，催化剂用量为反应物总质量的1．5％，反应时间45min，使用环己烷为带水剂的适宜条件下，己酸异戊酯的收率可达91．9％。     

12-钼磷酸—聚乙烯醇的光电子转移反应

12-钼磷酸—聚乙烯醇体系具有不可逆光致变色的特性。根据X射线光电子能谱、电子自旋共振谱、紫外及可见光谱的测试结果,笔者认为:在PMo_(12)-PVA的光电子转移反应中,PMo_(12)既是氧化剂也是光敏剂。PMo_(12)分子中氧可分成O_p、O_b和O_t三种情况.其中O_t可成为光化学的活性位置,它和PVA羟基上的氧均较易被紫外光激活。激活的0_t边使周围的一个电荷向金属原子(Mo~(Ⅵ))转移,边与PVA羟基上被激活的氧作用,电子就由此羟基上的氧向O_t转移,致使体系中部分PMo_(12)与PVA发生二电子或四电子氧化还原反应,形成Mo(Ⅵ、Ⅴ)配合物而变色,同时,PVA分子的部分羟基及该羟基位的碳上脱氢形成羰基而具有酮结构。此外,从Mo(V)的ESR特征信号随时间变化而减弱,但其吸收光谱的吸光度未变,于是推断该光化学反应过程中尚有Mo(Ⅳ)生成,已由XPS谱证实。