Highly strained InxGa(1−x)As−InyAl(1−y)As (x>0.8,y<0.3) layers for short wavelength QWIP and QCL structures grown by MBE

Highly strained quantum cascade laser (QCL) and quantum well infrared photodetector (QWIPs) structures based on In_xGa_(1−x)As−In_yAl_(1−y)As (x>0.8,y<0.3) layers have been grown by molecular beam epitaxy. Conditions of exact stoichiometric growth were used at a temperature of 420°C to produce structures that are suitable for both emission and detection in the 2–5 μm mid-infrared regime. High structural integrity, as assessed by double crystal X-ray diffraction, room temperature photoluminescence and electrical characteristics were observed. Strong room temperature intersubband absorption in highly tensile strained and strain-compensated In_0.84Ga_0.16As/AlAs/In_0.52Al_0.48As double barrier quantum wells grown on InP substrates is demonstrated. Γ–Γ intersubband transitions have been observed across a wide range of the mid-infrared spectrum (2–7 μm) in three structures of differing In_0.84Ga_0.16As well width (30, 45, and 80 Å). We demonstrate short-wavelength IR, intersubband operation in both detection and emission for application in QC and QWIP structures. By pushing the InGaAs–InAlAs system to its ultimate limit, we have obtained the highest band offsets that are theoretically possible in this system both for the Γ–Γ bands and the Γ–X bands, thereby opening up the way for both high power and high efficiency coupled with short-wavelength operation at room temperature. The versatility of this material system and technique in covering a wide range of the infrared spectrum is thus demonstrated.     

Statistical thermodynamics evaluation of polymer–polymer miscibility

The Simha and Somcynsky (S–S) statistical thermodynamics theory was used to compute the solubility parameters as a function of temperature and pressure [δ = δ(T, P)], for a series of polymer melts. The characteristic scaling parameters required for this task, P*, T*, and V*, were extracted from the pressure–temperature–volume (PVT) data. To determine the potential polymer–polymer miscibility, the dependence of δ versus T (at ambient pressure) was computed for 17 polymers. Close proximity of the δ versus T curves for four miscible polymer pairs: PPE/PS, PS/PVME, and PC/PMMA signaled the usefulness of this approach. It is noteworthy, that the tabulated solubility parameters (derived from the solution data under ambient conditions) propounded the immiscibility of the PVC/PVAc pair. The computed values of δ also suggested miscibility for polymer pairs of unknown miscibility, namely PPE/PVC, PPE/PVAc, and PET/PSF. In recognizing the limitations of the solubility parameter approach (the omission of several thermodynamic contributions), these preliminary results are auspicious because they indicate a new route for estimating the miscibility of any polymeric material at a given temperature and pressure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2909–2915, 2004     

Some Aspects of the Implementation of Scaling Quantum Mechanical Molecular Force Fields

Some features of software implementation of the Pulay scaling procedure are considered. The advantages of the single value decomposition method for maintaining well-conditionality of the scale factor determination problem are demonstrated. The necessity of using a rational number of scale factors is shown. The possibility of obtaining transferable scale factors with the Pulay method and thus predict the vibrational spectra of related compounds is emphasized.     

Kinetic Studies on the Reaction of Sodium Hexa-cyanoferrate(II) Complex with Peroxydisulfate Anion

Introduction In the previous studies on the oxidation reaction,peroxydisulfate was widely used as an oxidizingagent.1-5 One of the advantages of this oxidant lies in itsstability in a wide range of pH values. The reaction be-tween Fe(CN)5L3- (L=N-aromatic heterocyclic li-gands) and S2O8 2- has been proved to proceed throughan outer-sphere electron transfer mechanism.5 For a re-action [(Eq. (1)] to be under an outer-sphere mechanismthe steps involved are the formation of a reactant …     

Studies on the Adsorption of Asymmetrical Triblock Copolymers by Scheutjens-Fleer Theory and Monte Carlo Simulation

The adsorption of asymmetrical triblock copolymers from a non-selective solvent on solid surface has been studied by using Scheutjens-Fleer mean-field theory and Monte Carlo simulation method on lattice model. The main aim of this paper is to provide detailed computer simulation data, taking A8-kB20Ak as a key example, to study the influence of the structure of copolymer on adsorption behavior and make a comparison between MC and SF results. The simulated results show that the size distribution of various configurations and density-profile are dependent on molecular structure and adsorption energy. The molecular structure will lead to diversity of adsorption behavior. This discrepancy between different structures would be enlarged for the surface coverage and adsorption amount with increasing of the adsorption energy. The surface coverage and the adsorption amount as well as the bound fraction will become larger as symmetry of the molecular structure becomes gradually worse. The adsorption layer becomes thicker with increasing of symmetry of the molecule when adsorption energy is smaller but it becomes thinner when adsorption energy is higher. It is shown that SF theory can reproduce the adsorption behavior of asymmetrical triblock copolymers. However, systematic discrepancy between the theory and simulation still exists.The approximations inherited in the mean-filed theory such as random mixing and the allowance of direct back folding may be responsible for those deviations.     

Elliptic and parabolic problems in unbounded domains

We consider elliptic and parabolic problems in unbounded domains. We give general existence and regularity results in Besov spaces and semi‐explicit representation formulas via operator‐valued fundamental solutions which turn out to be a powerful tool to derive a series of qualitative results about the solutions. We give a sample of possible applications including asymptotic behavior in the large, singular perturbations, exact boundary conditions on artificial boundaries and validity of maximum principles. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

An approach to deciding the observational equivalence of Algol-like languages

We prove that the observational equivalence of third-order finitary (i.e. recursion-free) Idealized Algol (IA) is decidable using Game Semantics. By modelling the state explicitly in our games, we show that the denotation of a term M of this fragment of IA is a compactly innocent strategy-with-state, i.e. the strategy is generated by a finite view function f_M. Given any such f_M, we construct a real-time deterministic pushdown automaton (DPDA) that recognizes the complete plays of the knowing-strategy denotation of M. Since such plays characterize observational equivalence, and there is an algorithm for deciding whether any two DPDAs recognize the same language, we obtain a procedure for deciding the observational equivalence of third-order finitary IA. Restricted to second-order terms, the DPDA representation cuts down to a deterministic finite automaton; thus our approach gives a new proof of Ghica and McCusker’s regular-expression characterization for this fragment. Our algorithmic representation of program meanings, which is compositional, provides a foundation for model-checking a wide range of behavioural properties of IA and other cognate programming languages. Another result concerns second-order IA with full recursion: we show that observational equivalence for this fragment is undecidable.     

非饱和土本构关系的混合物理论(Ⅱ)--线性本构方程和场方程

通过对非饱和土非线性本构方程和场方程的线性化，推导出了非饱和土的线性本构方程和场方程，把线性方程表示为与Biot饱和多孔介质方程相似的形式；证明了Darcy定律对非饱和土的适用性；说明了Biot饱和多孔介质方程是这些线性方程的特征。所有这些都表明用混合理论处理非饱和土本构问题的正确性。     

基于粗糙集理论的知识约简及应用实例

在保持分类能力不变的前提下 ,通过利用粗糙集理论中的知识约简方法 ,在保护知识库分类不变的条件下 ,删除其中不相关或不重要的知识 ,从而导出问题的决策 .利用基于决策表的粗糙集模型算法 ,实例分析如何数字化表示决策表 ,并对其进行属性约简和属性值的约简 ,从而提取决策规则 .     

Electromagnetic energy flow near nanoparticles—I: single spheres

The electromagnetic (EM) energy flow near single spheres is investigated by applying Mie theory. From the patterns of the energy flow, the absorption and the scattering of light can be understood in the microscopic point of view. In the absorption profiles of metallic particles, most absorbed energy is consumed on the surface of the particles, which indicates that the resonance of surface plasmon is different from that of the bulk plasmon. Two mechanisms to enhanced local EM field are also distinguished. One is the surface plasmon resonance, and another one is the intensified energy flow.