聚硅氮烷在氨气中的裂解研究

聚硅氮烷在氨气中的裂解研究胡海峰陈朝辉冯春祥张长瑞宋永才（国防科技大学五系长沙４１００７３）关键词聚硅氮烷，氨气气氛，裂解机理先驱体转化法是制备陶瓷的一种独特方法，但裂解产物往往偏离化学稳定相组成，尤其是硅氮烷裂解后氮含量不足影响了材料的高温性能．...     

lignins of Allochruza paniculata and Glycyrrhiza glabra

The natural lignin of Allochruza paniculata and Glycyrrhiza glabra is studied by catalytic hydrogenolysis. Three types of lignin structural units are present: guaiacyl, syringyl, and p-coumaryl, which are characteristic of annual and perennial herbaceous plants. The structure of DLA from these plants is confirmed by UV, IR and PMR spectra.     

The pyrolytic graphite surface as an enzyme substrate: microscopic and spectroscopic studies

We have conducted a series of experiments to explore the surface of the polished pyrolytic graphite ‘edge’ electrode as routinely prepared for use in protein film voltammetry. Our investigations have included nitrogen porosimetry and scanning electron microscopy. The nitrogen adsorption revealed a Brunauer–Emmett–Teller surface area ∼10⁴ times greater than the geometric surface area of the electrode. The pore-size distribution calculated by the Horváth–Kawazoe method showed that 10–18% of the pore volume arises from pores having widths >10 nm and, thus, should be accessible to enzymes, although much of the exposed ‘wall’ surface may be inactive for enzyme binding or electron transfer: for example, it may be mainly basal plane. Scanning electron micrographs of the abraded pyrolytic graphite edge showed differing scales of surface damage caused by the abrasion and the presence of many cracks in the surface where thin platelets had been removed.This work is dedicated to Prof. Alan Bond on the occasion of his 60th birthday. Alan’s enthusiasm for the complexities of diffusion control persuaded one of us (F.A. Armstrong) to try and avoid it altogether in protein electrochemical studies.     

Fenton’s reagent-mediated degradation of residual Kraft black liquor

In this work, the effect of Fento’s reagent on the degradation of residual Kraft black liquor was investigated. The effect of Fenton’s reagent on the black liquor degradation was dependent on the concentration of H₂O₂. At low concentrations (5 and 15 mM) of H₂O₂, Fenton’s reagent caused the degradation of phenolic groups (6.8 and 44.8%, respectively), the reduction of reaction medium pH (18.2%), and the polymerization of black liquor lignin. At a high concentration (60 mM) of H₂O₂, Fenton’s reagent induced an extensive degradation of lignin (95–100%) and discoloration of the black liquor. In the presence of traces of iron, the addition of H₂O₂ alone induced mainly lignin fragmentation. In conclusion, Fenton’s reagent and H₂O₂ alone can degrade residual Kraft black liquor under acidic conditions at room temperature.     

Removal of Phenolic and Lignin Compounds from Bleached Kraft Mill Effluent by Fly Ash and Sepiolite

This study aimed to remove phenolic and lignin compounds from paper mill industry (4500 m³/h) wastewaters, which is discharged to sea from a plant located in the western Turkey. As adsorbent, fly ash, raw sepiolite and heat-activated sepiolite were used. The effect of factors such as, particle size, temperature and pH on adsorption process was investigated. From kinetic studies, equilibrium time was found as 1 h for both. The kinetic data supports pseudo-second order model but shows very poor fit for pseudo-first order model. Intraparticle model also shows that there are two separate stages in sorption process, namely, external diffusion and pore diffusion. Adsorption isotherms for fly ash and activated sepiolite were obtained at two different temperatures. From experiments carried out at different pHs, it was observed that pH plays an important role in the adsorption process in removing of both lignin and phenolic compounds, providing both ionizating the compounds and modifying sorbent surfaces. It was also observed that heat-activated sepiolite is more effective than raw sepiolite and fly ash to remove these compounds. Adsorption of lignin and phenolic compounds increases with decreasing particle size. In addition, the efficiency of adsorption decreases with increasing adsorption temperature for both fly ash and untreated sepiolite.     

Vinyl Polymerization. 254.∗ Polymerization of Methyl Methacrylate by the System Cellulose-Water-Carbon Tetrachloride

Radical polymerization of methyl methacrylate initiated by the system cellulose-water-carbon tetrachloride was kinetically studied. Results obtained are: 1) The amounts of water, carbon tetrachloride, and cellulose affected the conversion. Michaelis-Menten's equation was applied to the relationship between the rate of polymerization and the amount of MMA. 2) Other methacrylates and acrylates were also polymerized by this system. 3) When methanol or ethanol was used instead of water, some weak polymerization activity was observed. 4) Initiating ability depended on the kind of cellulose used. 5) The activity of cellulose was not changed by washing with boiling water or by solvent extraction. 6) Polymerization was inhibited by the presence of air. 7) Heating in the presence of water and carbon tetrachloride markedly decreased the activity of the cellulose.     

Partially bio‐based poly(amide imide)s by polycondensation of aromatic diacylhydrazides based on lignin‐derived phenolic acids and aromatic dianhydrides: Synthesis,characterization, and computational studies

Two new bio‐based diacylhydrazide monomers, namely, 4,4′‐(propane‐1,3‐diylbis(oxy))bis(3‐methoxybenzohydrazide) and 4,4′‐(propane‐1,3‐diylbis(oxy))bis(3,5‐dimethoxybenzohydrazide) were synthesized starting from lignin‐derived phenolic acids, namely, vanillic acid and syringic acid. A series of poly(amide imide)s was synthesized by polycondensation of these diacylhydrazide monomers with commercially available aromatic dianhydrides. Poly(amide imide)s showed inherent viscosity in the range 0.44–0.56 dL g^?1 and exhibited good solubility in organic solvents. Poly(amide imide)s could be cast into transparent, flexible, and tough films from their N ,N‐dimethylacetamide solutions. Poly(amide imide)s showed 10% weight loss in the temperature range 340–364 °C indicating their good thermal stability. Glass transition temperature (T _g) of poly(amide imides)s were measured by DSC and DMA which were in the range 201–223 °C and 214–248 °C, respectively. The T _g values of poly(amide imide)s were dependent on the number methoxy substituents on aromatic rings of diacylhydrazide monomers. Molecular dynamics simulation studies revealed that chain rigidity is the dominant factor for observed trends in T _g. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3636–3645     

Preparation of hydrogel from green polymer

A new method was used for the production of hydrogels from green polymer with a higher swelling ratio. These hydrogels were synthesized first by graft copolymerization between acrylamide (AM) and poly(vinyl alcohol) (PVA) with alkaline or kraft lignin (AM‐PVA‐g‐lignin) and then by mixing with acrylamide monomer. The kraft and alkaline lignins were isolated from pulping liquor and characterized using UV and FT‐IR spectroscopy, and the formed hydrogels were characterized using FT‐IR spectroscopy and scanning electron microscopy (SEM). Compared with kraft lignin hydrogel, the alkaline lignin hydrogel had very high swelling ratios and slower water uptake and deswelling rates attributed to its compatible network structure. The hydrogels formed were used also to study the influence of sodium chloride on the absorption capacity at room temperature and swelling ratios at different temperatures. Copyright © 2004 John Wiley & Sons, Ltd.     

Mathematical modeling of controlled-relase kinetics of herbicides in a dynamic-water-bath system

Applied Biochemistry and Biotechnology - Release of herbicides from lignin-based formulations follows a diffusion-controlled mechanism. For mathematical modeling of diffusive transport, the...