Frequency doubling of Nd:YAG- and GaAs-lasers by KNbO3: Ta crystals

Abstract

For KNb_1-xTa_xO₃ crystals the influence of the Ta-concentration on the phase-matching properties for optical second harmonic generation (SHG) was measured. For non-critical phase matched SHG of the Nd:YAG-laser (1064nm) the coefficient d₃₁ of the tensor of the nonlinear susceptibility was applied, while for the GaAs-laser (905 nm) the coefficient d₃₂ was used. For both laser wavelengths the phase-matching temperature decreases with increasing Ta-concentration. Non-critical phase-matching at room temperature can be reached with the GaAs-laser for a Ta-concentration of ≈9%. The corresponding value for the Nd:YAG-laser is ≈14%.     

Microwave‐assisted extraction in combination with HPLC‐UV for quantitative analysis of six bioactive oxoisoaporphine alkaloids in Menispermum dauricum DC

A novel and reliable method based on microwave‐assisted extraction (MAE) followed by HPLC‐UV was developed and validated for the simultaneous quantification of six pharmacologically important oxoisoaporphine alkaloids in the total plants of Menispermum dauricum DC. The optimal MAE extraction condition was performed at 60°C for 11 min with ethanol–water (70:30, v/v) as the extracting solvent, and the solvent to solid ratio was 20:1. Chromatographic separation was achieved on a reversed‐phase YMC C₁₈ column (250 × 4.6 mm, i.d., 5 µm) with a gradient mobile phase consisting of A (1% aqueous formic acid) and B (acetonitrile containing 1% formic acid) at a flow rate of 1.5 mL/min. The detection wavelength was set at 422 nm. Excellent linearity over the investigated concentration ranges was observed with values of r >0.999 for all analytes. The method developed was validated with acceptable sensitivity, intra‐ and inter‐day precision and extraction recoveries. It was successfully applied to the determination of six alkaloids in Menispermum dauricum DC from different sources and different parts of Menispermum dauricum DC. The results obtained indicated that the method is suitable for the quality control of Menispermum dauricum DC. Copyright © 2015 John Wiley & Sons, Ltd.     

Review on ionization and quenching mechanisms of Trichel pulse

Trichel pulse is a kind of pulsed mode in negative DC corona discharge, which has attracted significant attention because of its considerable applications in industry. Over eighty years, plenty of effort including simulations and experiments has been spent to reveal the ionization and quenching mechanisms of Trichel pulse. By revisiting and summarizing the basic characteristics and well-accepted ionization and quenching mechanisms, this review provides a basic understanding and the current status of Trichel pulse.     

Designing nickel phthalocyanine periphery by alkyl chain via [1,3,4]-oxadiazole

Nickel phthalocyanine (NiPc, 1) periphery has been decorated by alkyl chains of varying chain length via [1,3,4]-oxadiazole moiety (NiPcs 3a–3f). All the newly synthesized compounds NiPcs 3a–3d have been completely characterized by elemental analysis, FT-IR, solid-state UV-Vis, and solid-state ¹³C NMR spectroscopy, in addition to X-ray diffraction, scanning electron microscopy, and thermal analysis. The effect of chain length in the NiPc periphery on electronic absorption and DC electrical conductivity has been investigated.     

Synthesis,characterization, corrosion inhibition of mild steel in HCl (0.5 N) solution and solid‐state electrical conductivity of new Co(II), Ni(II), Cu(II) and Zn(II) complexes

This work consists of a study of the corrosion‐inhibiting and semiconducting properties of new binuclear Co(II), Ni(II), Cu(II) and Zn(II) complexes with a Schiff base, H₂L, obtained from the 2:1 M condensation of salicylaldehyde and o‐dianisidine, respectively. Elemental, spectral and thermal analyses were used to characterize these complexes. The magnetic susceptibilities of these complexes were also determined. Weight loss, potentiodynamic polarization and scanning optical microscopy were the techniques used to investigate the efficiency of these new compounds as corrosion inhibitors. The antibacterial activity of the compounds was measured against sulfate‐reducing bacteria. It was found that inhibition occurs via the chemisorption of metal complexes on the steel surface. This absorption obeys the Langmuir adsorption isotherm model.     

DC Electrical Conductivity of the Direct Electrochemically Synthesized Polythiophene Metal Complexes

Electrochemical anodic oxidation of a metal anode in an acetone solution of 2,5-diamino-3,4-dicyanothiophene gave the polythiophene metal complexes of Co, Ni, Cu, Zn, Cd, and Sn. Chemical analyses, as well as FTIR and electronic spectral data, are presented to confirm the formulation of the isolated materials. DC electrical conductivity measurements of the polymer complexes were measured in the range 300–500 K in the annealed and 5% doped forms. The products gave electrical conductivity in the semi-conducting region that increased by heat.     

Intermetallic Pt2Si：magnetron-sputtering preparation and electrocatalysis toward ethanol oxidation

Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions,semi-conductor elements,such as Si,have hitherto not been examined.Here we report a simple synthesis of intermetallic Pt2Si electrode using magnetron sputtering and the electrocatalysis toward ethanol oxidation reaction（EOR）.In comparison to Pt,the intermetallic Pt2Si surface turns out to be much more active in catalyzing the EOR：the onset potential shifts negatively by 150 mV,and the current density at 0.6 V increases by a magnitude of one order.Such an enormous enhancement in EOR catalysis is ascribed to the promotion effects of Si,which can not only provide active surface oxygenated species to accelerate the removal of COads,but also strongly alter the electronic property of Pt,as clearly indicated by the core-level shift in XPS spectrum.     

The Synthesis,Characterization and DC Electrical Conductivity of Polypyrrole‐Zirconium Complex

Polypyrrole‐zirconium complex has been synthesized by reacting 2‐amino‐3,4‐dicyano‐5‐mercaptopyrrole with zirconium nitrate in absolute ethanol under reflux for 24 h. The product has been characterized by elemental analyses, FTIR spectroscopy, in addition to thermal analysis (TGA and DSC) and its solubility has been investigated. The DC electrical conductivity variation of polypyrrole‐zirconium complex has been studied in the temperature range 300–500 K after annealing for 24 h at 100°C and doping with I₂, FeCl₃ and CuCl₂ · H₂O for comparison. An attempt has been made to interpret the DC electrical conductivity behavior and thermal properties to chain length, dopant used, polymer structure and attached groups.     

Simultaneous determination of 11 related impurities in propofol by gas chromatography/tandem mass spectrometry coupled with pulsed splitless injection technique

A variety of related impurities, including starting materials, process impurities, and degradation products, can be detected in propofol. In this article, a sensitive and selective GC‐MS/MS method using pulsed splitless injection technique for the determination of 11 main related impurities in propofol in one chromatogram is investigated. This method is extensively validated for its linearity, recovery, precision, LOD, and LOQ, and is able to detect trace‐level related impurities (LOD = 0.2–5.6 μg/g) in propofol bulk drug. Stressed tests proposed that oxidative degradation, photolytic degradation, and heat are the main causes for the formation of degradation products in propofol.     

Annealing of silver nanolayers sputtered on polytetrafluoroethylene

Silver nanolayers sputtered on polytetrafluoroethylene and their changes induced by post‐deposition annealing at 100–300 °C are studied. Changes in surface morphology and roughness are examined by atomic force microscopy and by measurement of electrical sheet resistance by two‐point technique. Chemical composition was determined by X‐ray photoelectron spectroscopy (XPS) and electrokinetic analysis in dependence on the gold layer thickness. The annealing at 300 °C leads to significant rearrangement of the silver layer, and the transition threshold increases to 35 nm. The presence of oxidized structures on silver‐coated samples is observed in XPS spectra and by electrokinetic analysis, too. Annealing of pristine and silver‐coated poly(tetrafluoroethylene) at 300 °C results in significant change of the sample surface morphology and chemistry. There is observed formation of isolated silver islands on the surface, which could be connected with silver melting. Later, the silver agglomeration takes place. Copyright © 2013 John Wiley & Sons, Ltd.