Removal of low-concentration benzene in indoor air with plasma-MnO2 catalysis system

Non-thermal plasma (NTP) and combined plasma-MnO₂ catalytic (CPMC) air cleaners were tested for removal of low-concentration benzene in air. Both air cleaners were made of stainless steel needle matrix plate and used DC corona discharger. The effects of discharge power and relative humidity (RH) on benzene removal efficiency were investigated in a closed chamber. The intermediate products produced in purification processes were analyzed using gas chromatography-mass spectrometer (GC-MS). The concentrations of discharge byproducts and CO₂ selectivity produced in both processes were also compared. It was found that the benzene removal efficiency increased with discharge power in both systems; With the increase of RH in air, benzene removal efficiency firstly increased and then decreased in NTP while it gradually decreased in CPMC. For a fixed discharge power of 9 W and RH of 20% in CPMC, the conversion of benzene increased from 82.9% to 89.6%, the CO₂ selectivity increased from 38% to 80%, the concentration of O₃ decreased from 25.3 ppm to 1.3 ppm, and NO₂ formation decreased from 234 ppm to 25.7 ppm, compared with NTP.     

A domain decomposition method for three species modeling of multi-electrode negative corona discharge – With applications to electrostatic precipitators

The negative corona discharge problem for multi-electrode geometries is modeled by a three species model. The equations are solved using domain decomposition, by recognizing that multiple species are only present in a small part of the domain, and hence only need to be incorporated locally in the model.The method is applied to an industrially relevant three wire electrostatic precipitator geometry. The calculated current density is in good agreement with experimental data. To further illustrate applications of the three species solution, it is used for coupled particle, fluid, and electrostatic simulations to analyze particle collection properties.     

Quantitative analysis of oxidative DNA damage induced by high-voltage pulsed discharge with cavitation

Pulsed discharge is used for sterilization and disinfection, but the details of the molecular mechanisms remain largely unknown. Since pulsed discharge generates reactive oxygen species (ROS), we analyzed the oxidative DNA damages after pulsed discharge treatment to consider the involvement of ROS in the damaging process. We applied pulsed discharge with cavitation to plasmid DNA molecules and estimated the yields of the damages by agarose gel electrophoresis. The treated DNA contained various oxidative DNA damages, including single and double strand breaks and base lesions. The yields of the damages increased in response to the energy used for pulsed discharge. We also measured the yield of 8-hydroxyguanine (8-OH-G), one of the major oxidative base lesions, in the treated plasmid DNA by mass spectrometry quantitatively and found that the yield of the oxidative base lesion corresponded to the increment of the applied energy. In addition, we observed the involvement of mutM gene, which is responsible for repair of 8-OH-G, in the increased sensitivity of Escherichia coli to pulsed discharge. Therefore, ROS seem to mediate the sterilization ability of pulsed discharge.     

Effect of relative humidity on current–voltage characteristics of monopolar DC wire-to-plane system

This paper deals with the DC monopolar corona discharge in wire-to-plane geometry under variable humid air conditions. The classical formulas of Townsend commonly used for the current–voltage characteristics were used to determine the various corona parameters for the both polarities of the corona discharge. A circular biased probe has been adapted to the plane and is used to measure the ground plane current density and electric field during the monopolar corona discharge. A new approach to the problem of corona discharge in transmission system has been described in this paper. The effect of varying the humidity and wires diameter is also investigated. The values of the electric field and the current density are maximum beneath the corona wire and decrease when moving away from them and the current–voltage characteristics follow the quadratic Townsend's law. The experimental results show that the monopolar corona discharge is strongly affected by the air humidity. The current density and the electric field are measured and compared with the computed values. The agreement between the calculated values and those obtained experimentally is satisfactory. The per unit electric field and current density are also represented by a unique function.     

Study of ozone generation in an atmospheric dielectric barrier discharge reactor

Ozone (O₃) generation in a dielectric barrier discharge (DBD) reactor driven by a pulsed power supply was investigated at atmospheric pressure and room temperature. An O₃ generation efficiency model is established in which discharge power, O₂ concentration, gas flow rate, and volume of the discharge space are included. Constants in the O₃ generation efficiency model were obtained by fitting the model with experiment results. O₃ concentration can be simply calculated from the energy density and initial O₂ concentration. Comparison on O₃ concentrations from calculation with references is given.     

Surface charge dynamics studied by the temporal evolution of the corona charging current

The decay of surface charges deposited on the dielectric material by the partial discharge (PD) activity has a great impact on the repetition of partial discharges. In this work, the effect of dielectric placed on the surface of ground electrode in a needle-plane configuration on the discharge activity was investigated, with the application of a periodic negative step voltage. The charge decay mechanisms on a corona charged dielectric surface were investigated based on a comparison between experiments and a FEM-based numerical model. The comparison indicates that the surface charges may decay due to different mechanisms depending on the applied stress.     

Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

Characterization of Nd Doped Films Prepared by Femtosecond Pulsed Laser DepositionSCIEI北大核心CSCD

Thin films of Nd : YAG and Nd : Glass were prepared on Si (100) substrate by pulsed laser deposition technology. The morphology of film surface and cross section, composition, absorption spectrum and photoluminescence (PL) spectra of films were investigated by scanning electron microscope (SEM), energy disperse spectroscopy (EDS), Fourier transform infrared spectrometer(FTIR), optical parametric oscillator(OPO) and grating spectrometer. The results show that both Nd : YAG films and Nd : Glass films grown on the substrates at room temperature are amorphous. Nd : YAG films grown by PLD contain Nd element with 0. 15 at. % stoichiometric proportion. The absorption spectrum of bulk Nd : YAG target rather than deposited films exhibit two absorption peaks at 750 and 808 nm. There are no evident peaks in the photoluminescence spectra curve of Nd : YAG films. However, the photoluminescence spectra of Nd : Glass films with two sharp peaks at the wavelength of 877 and 1 064 nm are observed. It indicates that Nd is doped into glass host as optically active Nd3+ ions when Nd : Glass films grow at room temperature. But for Nd : YAG films, Nd don't incorporate into YAG host as Nd3+ ions.     

高压直流断路器测控装置的设计与试验分析

直流输(配)电是目前电网发展的趋势,而高压直流断路器的研发是影响其发展的关键技术之一。测量与控制装置的研究是高压直流断路器的研发要点。采用高压电力电子器件,DSP+FPGA相结合的控制方式,对其测控装置进行研究分析,提出了区间阈值的控制方法及相应的控制时序,从高压直流输电、能源多样化的发展需求入手,将机械开关和固态开光相结合,设计了一套混合式高压直流断路器样机。通过对样机进行合分闸试验及故障分闸试验,证明了所研制的高压直流断路器样机具有分闸动作快,限弧能力强,动作一致性好等优点。     

基于RTW的双向充放电机实时控制技术

随着智能电网和绿色能源技术的快速发展,双向充放电机也越来越受到关注;文章主要研究双向充放电机充电过程中电压的稳定性和放电过程中并网电流波形的畸变率;提出了一种基于RTW的matlab/simulink控制方法,在simulink环境下搭建仿真模型和控制模型,然后将达到预期效果的仿真模型所对应的控制模型编译为代码并烧写到DSP中;此种方法在能够保证在恒流源和恒压源两种充电模式中电流和电压的稳定性,在放电过程中并网谐波电流总畸变率小于5%,功率因数基本为1;仿真结果和基于DSP2812的硬件平台实验都证明了这种方法的有效性。