Promotion effect of Pt on a SnO2–WO3 material for NOx sensing

Metal-oxide nanocomposites were prepared over screen-printed gold electrodes to be used as room-temperature NO_x (nitric-oxide (NO) and nitrogen dioxide (NO₂)) sensors. Various weight ratios of SnO₂–WO₃ and Pt loadings were used for NO sensing. The sensing materials were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET surface analysis. The NO-sensing results indicated that SnO₂–WO₃ (1:2) was more effective than other materials were. The sensor response (S=resistance of N₂/resistance of NO=R_N2/R_NO) for detecting 1000 ppm of NO at room temperature was 2.6. The response time (T₉₀) and recovery time (TR₉₀) was 40 s and 86 s, respectively. By further loading with 0.5% Pt, the sensor response increased to 3.3. The response and recovery times of 0.5% Pt/SnO₂–WO₃ (1:2) were 40 s and 206 s, respectively. The linearity of the sensor response for a NO concentration range of 10–1000 ppm was 0.9729. A mechanism involving Pt promotion of the SnO₂–WO₃ heterojunction was proposed for NO adsorption, surface reaction, and adsorbed NO₂ desorption.     

Long‐Wavelength Fluorescent Reporters for Monitoring Protein Kinase Activity

In vivo optical imaging must contend with the limitations imposed by the optical window of tissue (600–1000 nm). Although a wide array of fluorophores are available that are visualized in the red and near‐IR region of the spectrum, with the exception of proteases, there are few long wavelength probes for enzymes. This situation poses a particular challenge for studying the intracellular biochemistry of erythrocytes, the high hemoglobin content of which optically obscures subcellular monitoring at wavelengths less than 600 nm. To address this, tunable fluorescent reporters for protein kinase activity were developed. The probing wavelength is preprogrammed by using readily available fluorophores, thereby enabling detection within the optical window of tissue, specifically in the far‐red and near‐IR region. These agents were used to monitor endogenous cAMP‐dependent protein kinase activity in erythrocyte lysates and in intact erythrocytes when using a light‐activatable reporter.     

A novel signal-on fluorescent aptasensor for ochratoxin A detection based on RecJf exonuclease-induced signal amplification

This article describes a simple and homogeneous fluorescent aptasensor for the detection of ochratoxin A (OTA). With its high specificity and simplicity; RecJ_f exonuclease is used to cleave DNA strand of the FAM-aptamer/OTA complex and realize target recycling signal amplification. In order to avoid the loss of reaction system, magnetic beads (MBs) are added only once at the last experimental step. This proposed fluorescent aptasensor showed the higher sensitivity in the range of 0.1–100 ng/mL with LOD of 0.056 ng/mL, and the good selectivity against other interfering toxins. The feasibility of the prepared aptasensor was studied by detecting OTA in spiked liquor and cereal samples. The obtained average recoveries ranged from 92% to 115%. This study provides a promising application with convenience and rapidness in the aptasensor fabrication for food safety analysis.     

Superwetting Patterned Membranes with an Anisotropy/Isotropy Transition: Towards Signal Expression and Liquid Permeation

Superwetting membranes with responsive properties have attracted heightened attention because of their fine‐tunable surface wettability. However, their functional diversity is severely limited by the “black‐or‐white” wettability transition. Herein, we describe a coating strategy to fabricate multifunctional responsive superwetting membranes with SiO₂/octadecylamine patterns. The adjustable patterns in the responsive region are the key factor for functional diversity. Specifically, the coated part of the membrane displayed a superhydrophobicity/superhydrophilicity transition at different pH values, whereas the uncoated part exhibited invariant superhydrophilicity. On the basis of this anisotropy/isotropy transition, the membranes can serve as either responsive permeable membranes or signal‐expression membranes, thus enabling the responsive separation and permeation of liquids with satisfactory separation efficiency (>99.90 %) and flux (ca. 60 L m^?2 h), as well as real‐time liquid signal expression with alterable signals.     

Wavelet transforms in separation science for denoising and peak overlap detection

Wavelet transform is a versatile time‐frequency analysis technique, which allows localization of useful signals in time or space and separates them from noise. The detector output from any analytical instrument is mathematically equivalent to a digital image. Signals obtained in chemical separations that vary in time (e.g., high‐performance liquid chromatography) or space (e.g., planar chromatography) are amenable to wavelet analysis. This article gives an overview of wavelet analysis, and graphically explains all the relevant concepts. Continuous wavelet transform and discrete wavelet transform concepts are pictorially explained along with their chromatographic applications. An example is shown for qualitative peak overlap detection in a noisy chromatogram using continuous wavelet transform. The concept of signal decomposition, denoising, and then signal reconstruction is graphically discussed for discrete wavelet transform. All the digital filters in chromatographic instruments used today potentially broaden and distort narrow peaks. Finally, a low signal‐to‐noise ratio chromatogram is denoised using the procedure. Significant gains (>tenfold) in signal‐to‐noise ratio are shown with wavelet analysis. Peaks that were not initially visible were recovered with good accuracy. Since discrete wavelet transform denoising analysis applies to any detector used in separation science, researchers should strongly consider using wavelets for their research.     

水杨酸甲酯清除羟基自由基活性的研究

利用脉冲辐解技术研究了水杨酸甲酯清除羟基自由基反应的瞬态吸收谱,测定了水杨酸甲酯与羟基自由基反应的表观速率常数。辅以常规检测方法,测定了水杨酸甲酯对羟基自由基的清除率。结果表明,水杨酸甲酯能快速有效清除羟基自由基。探讨了水杨酸甲酯清除羟基自由基的反应机制。     

模型传递用于解析遥感傅里叶变换红外谱图

基于模型传递的原理,建立了一种可对存在背景干扰,谱峰严重混叠的遥感傅里叶变换红外(remote sensing Fourier transform infrared: RS-FTIR)谱图进行解析的方法。分别用4组分气体混合物的EPA红外标准谱图和RS-FTIR谱图,建立校正和预测模型,经过正交信号校正(OSC)处理后,用EPA红外谱图数据所建立的校正模型,对RS-FTIR谱图数据进行预测,得到的丙酮、甲醇、苯和三氯甲烷的均方根预测误差(RMSEP)分别为：0.008 5,0.018 0,0.064 0,0.002 8。未经OSC处理时的RMSEP依次是0.085 6,0.047 9,1.065 3,0.014 2。经优化,支集选择的方法为Kennard-Stone法,OSC在实现过程中循环次数为3时得到的预测结果最好。研究结果表明,该方法能够克服背景和校正模型给RS-FTIR监测大气污染物带来的制约。     

HPI接口与PLX9054的逻辑实现

介绍了基于DSP的HPI接口和PLX9054芯片的特点及应用,使用ALTERA公司的CPLD-EPM7256实现了DSP芯片6701和PLX9054之间的无缝连接,并在PC机上获得了稳定的数据传输.     

贝叶斯优化卷积神经网络公共场所异常声识别*

针对公共场所异常声的感知和识别问题,提出一种基于贝叶斯优化卷积神经网络的识别方法。提取声信号的Gammatone倒谱系数、倍频程功率谱、短时能量和谱质心,组合成声信号的特征图。构建卷积神经网络作为分类器,利用递增的卷积核设置和池化操作处理不同尺度的特征。基于贝叶斯优化算法优化卷积神经网络的模型参数,对包括火苗噼啪声、婴儿啼哭声、烟花燃放声、玻璃破碎声和警报声的5种公共场所异常声进行识别。该方法的识别结果与基于不同的特征提取和分类器方案得到的识别结果进行比较,结果表明该方法的识别效果优于其他特征提取和分类器方案的识别效果。最后分析了该方法在不同信噪比噪声干扰下的识别结果,验证了该方法的有效性。     

超声搅拌磁流变抛光液的声场仿真分析

为了探究超声搅拌磁流变抛光液的制备及优化工艺,利用多物理场数值计算方法,建立了超声搅拌磁流变抛光液的声场仿真模型,并进行了频域分析。研究了不同液位深度、超声变幅杆探入深度,不同功率下磁流变抛光液的声场分布。通过测量磁流变抛光液的声场强度对声场仿真进行了验证。结果表明：随着距变幅杆距离的增加,声强逐渐减弱,高声强区域主要分布在换能器轴线附近。声强在距变幅杆20mm范围内急剧衰减,变幅杆最佳探入深度为10mm,增大功率有助于空化区域的扩大。声场仿真结果与实验测量结果基本一致,对磁流变抛光液的制备提供了数值计算基础。