Fold optics path: an improvement for an atomic fountain

A fold optical path is utilized to capture and launch atoms in the atomic fountain.This improved technique reduces the laser power needed by 60 percent,facilitates suppression of the laser power fluctuations,and leads to a more simple and stable system.     

用于显性脉冲式触发器的新型低功耗脉冲信号发生器

脉冲式触发器具有吸收时钟偏移和速度快的优点,为了实现高性能低功耗脉冲式触发器,提出了2种用于显性脉冲式触发器的新型低功耗双边沿脉冲信号发生器.第1种采用延时的时钟信号控制脉冲发生器内部节点的充放电路径,使它们交替导通来产生脉冲信号,减少了直流短路电流,降低了动态功耗;第2种在时钟上升沿和下降沿分别采用NMOS传输晶体管和级联PMOS管直接输出高电平脉冲信号,使其具有平衡的脉冲产生时间,有利于实现对称的输入信号建立时间,以达到脉冲式触发器最小的输入输出延时.通过HSPICE仿真,与以往同类的脉冲信号发生器相比,本文提出的2种脉冲信号发生器在平均功耗、速度、总沟道宽度等方面均有明显的优势,适用于设计高性能低功耗显性脉冲式触发器.     

Internal quantum efficiency drop induced by the heat generation inside of light emitting diodes （LEDs）

The reasons for low output power of AlGaInP Light Emitting Diodes (LEDs) have been analysed. LEDs with AlGaInP material have high internal but low external quantum efficiency and much heat generated inside especially at a large injected current which would reduce both the internal and external quantum efficiencies. Two kinds of LEDs with the same active region but different window layers have been fabricated. The new window layer composed of textured 0.5 μm GaP and thin Indium-Tin-Oxide film has shown that low external quantum efficiency (EQE) has serious impaction on the internal quantum efficiency (IQE), because the carrier distribution will change with the body temperature increasing due to the heat inside, and the test results have shown the evidence of LEDs with lower output power and bigger wavelength red shift.     

ICRH带状双天线的间距对等离子体耦合特性的影响

采用能量一次吸收假设、等离子体平板模型和三维天线模型数值模拟离子回旋共振加热时带状双天线与等离子体的耦合过程,得到天线的辐射功率、等离子体的吸收功率密度分布随天线间距变化的关系.通过对比分析,得出结论:在一定实验条件下,当带状双天线同相馈电时,天线间距越小,离子回旋共振加热效果越好.     

Experimental investigation on chaos generation in erbium-doped fiber single-ring lasers

In this paper,the chaotic behaviors in an erbium-doped fiber(EDF) single-ring laser(EDFSRL) are investigated experimentally by using the loss modulation method.An electro-optic modulator(EOM) made of LiNbO 3 crystal is added to the system.Thus,by changing the modulation voltage and the modulation frequency of the EOM,the freedom of the EDFSRL system is increased.The chaotic characteristics of the system are studied by observing the time series and the power spectra.The experimental results indicate that the erbium-doped fiber single-ring laser system can enter into chaos states through period-doubling bifurcation and intermittency routes.     

基于实时Linux的极向场电源主控制系统的设计

为了满足极向场电源控制系统严苛的实时响应的要求,选择实时Linux系统作为系统平台,采用一个开放源代码的、基于C/C++的Eclipse可扩展的开发平台作为开发工具,完成极向场电源主控制系统的设计,实现了在一个控制周期内(1ms)对极向场电源系统的12套本地控制器的实时通信和实时控制。对极向场电源主控制系统的高速通信和实时控制、稳定可靠等关键问题给出了可行的实践性的解决方法。经实验测试,该设计运行稳定,能满足极向场电源控制系统的实时需求。     

Magnetocaloric effect and magnetic properties in NdMnO3 perovskite: A Monte Carlo approach

The magnetic properties and magnetocaloric effect in $\text{NdMn}{\text{O}}_3$ have been investigated, as well as the effect of magnetic anisotropy in the magnetocaloric properties of the perovskite-type compound. A classical Heisenberg Hamiltonian with nearest and next-nearest neighbors interactions was implemented. Hamiltonian parameters were fitted in order to reproduce experimental results. Magnetic field dependence on the magnetization, for isothermal processes, was performed. In this way, the magnetic entropy change $\left(\mathrm{\Delta }{S}_m\right)$ was computed as well as the relative cooling power (RCP). Results show that as the magnetic anisotropy constant increases, there was not only a sharpening, but also an increase in peak height of $?\mathrm{\Delta }{S}_m$. Finally, the magnetic field and anisotropy dependences on the RCP were obtained, showing that the highest values of the RCP were found for low anisotropy values.     

并联交错PFC技术在磁体电源中的应用

并联交错功率因数校正(powerfactorcorrection,PFC)具有能减小输入电流纹波,减小电感磁芯尺寸,减小输出电容纹波、功率因数高等优点．针对其优点,考虑将该变换器应用到强磁场中心的超导磁体电源的备用方案中,以弥补现在运行电源体积过大的不足．本文主要介绍了并联交错PFC的工作原理,对其参数进行设计和选型,分析了控制方法,利用SiC器件,搭建了１kW 的实验样机,实验验证了方案的可行性,为下一步超导磁体电源的升级改造提供了理论和工程经验。     

颗粒-颗粒接触力的热力学模型

以颗粒二体接触力模型为基础和出发点的软球离散元模拟是当前颗粒物理和力学领域广泛应用的研究手段.但文献上经常使用的、包括著名的Hertz-Mindlin和Luding在内的力模型并没有完全明确弹性势能或耗散热的计算方法,故从热力学层面看它们还需要完善.考虑到机械能的耗散行为是这类材料的重要物理内容,本文借鉴近年来提出的颗粒固体流体动力学(GSH)思路,提出一种具有明确势能和热功率的接触力建模方法.该理论除明确给出了机械能和热能的计算公式外,还能具体描述能量守恒、热力学平衡态和熵增加等基本原理,解决了传统接触力模型在这些方面的欠缺问题.初步计算显示本文模型的恢复系数可以随碰撞速率的增加而减弱,这比现有的其他模型更符合实验观测.虽然为简单起见这些公式仅局限于二维和忽略颗粒转动运动情况,文中讨论了如何推广到三维含转动情形,以及所涉及的滚动和扭转接触力的热力学处理问题.鉴于是否在Onsager非平衡热力学基础上建模是本文给出的接触力公式有别于当前其他模型的关键所在,文中强调了这里的主要建模对象应该是热力学特征函数和Onsager迁移系数,而接触力是它们的推导结果.这是一个与目前直接针对接触力进行建模的不同思路.文中对颗粒物质特有的、反映样品几何变形与弹应变之间联络的一个非对角迁移系数做了详细介绍,并且认为它与打滑等复杂力学现象关系密切,无论宏观GSH尺度上,还是细观接触力尺度上都不可忽略.     

Weizsäcker-Skyrme核质量模型的统计误差研究

基于最大值近似估算的方法,系统地研究了Weizsäcker-Skyrme（WS4）核质量模型的参数不确定性,并计算了WS4核质量模型理论预言值的统计误差。WS4核质量模型的理论预言值与实验值的偏差基本都小于模型的统计误差,表明采用最大值近似估算法对WS4核质量模型理论预言的统计误差的分析是简捷而有效的。进一步研究了WS4核质量模型理论计算中最敏感的参数,结果表明,对称能系数相关的两个参数c_sym和κ对中子滴线附近的原子核质量有重要影响。此外还对WS4模型与WS*模型的参数不确定性及统计误差进行了对比研究,WS4模型中各模型参数的不确定性比WS*模型中相应模型参数的不确定性降低了10%~ 50%。The statistical uncertainties of 15 model parameters in the Weizsäcker-Skyrme(WS4) mass model are investigated with an efficient approach, and the propagated errors in the predicted masses are estimated. The discrepancies between the predicted masses and the experimental data are almost all smaller than the model errors. The most sensitive model parameter which causes the largest statistical error is analyzed for all bound nuclei. We find that the two coefficients of symmetry energy term significantly influence the mass predictions of extremely neutron-rich nuclei. In addition, the parameter uncertainties and statistical errors of the WS4 mass model and the WS* mass model are compared. The uncertainties of model parameter in the WS4 mass model is reduced by 10% ~ 50% compared with the WS* mass model.