石墨烯氧化过程中的热分析-质谱以及脉冲热分析方法研究

本文由氧化石墨烯通过水热法制备直接获得石墨烯。采用热重-差热分析方法检测了石墨烯受热过程中的质量变化和氧化温度。利用热分析-质谱联用技术在400-650 ℃温度区间得到了水和二氧化碳正离子质谱峰,这说明石墨烯氧化过程中的质量损失是由羟基水和二氧化碳脱除造成的。同时,还采用非等温热分析动力学方法,利用5、10、15 ℃·min^-1三种不同升温速率获得了石墨烯材料在空气气氛下的热分析动力学参数。通过Kissinger方法计算出石墨烯氧化过程中的活化能（E_a）和指前因子的对数（lg（A/s^-1））分别为155.11 kJ·mol^-1和6.90。利用Ozawa-Flynn-Wall （FWO）方法还建立了活化能和指前因子与反应转化率之间的关系。基于以上研究结果,本工作将对石墨烯在热界面、导热和先进复合材料等领域的应用提供参考价值。     

Kinetic and structural characterization of human manganese superoxide dismutase containing 3-fluorotyrosines

Incorporation of 3-fluorotyrosine and site-specific mutagenesis have been used with stopped-flow spectrophotometry and pulse radiolysis to investigate the catalytic properties of human manganese superoxide dismutase (MnSOD). All of the nine tyrosine residues in each of the four subunits of the homotetramer of human MnSOD were replaced with 3-fluorotyrosine. Previous studies showed that the crystal structures of the unfluorinated and fluorinated human MnSOD are nearly superimposable with the root-mean-square deviation for 198 -carbon atoms at 0.3 Å. However, the catalytic activity k_cat/K_m of the fluorinated MnSOD at 30 μM⁻¹ s⁻¹ was less than unfluorinated wild type at 800 μM⁻¹ s⁻¹. Comparison of the values of k_cat/K_m for fluorinated and unfluorinated wild-type andY34F MnSOD showed that this decrease for the fluorinated enzyme was in significant part due to 3-fluorotyrosine residues distant (>7 Å) from the active-site metal, not to 3-fluorotyrosine at position 34 close (5 Å) to the metal. Although many rate constants for the catalysis are decreased by this fluorination, the rate of dissociation of the product-inhibited complex appears unchanged by the presence of fluorinated tyrosines. These results suggest that Tyr34 is not a proton donor in the release of the product-inhibited complex, which involves protonation of a peroxo complex of the metal with release of hydrogen peroxide.     

Evaluation of Multiple Corona Reactor Modes and the Application in Odor Removal

Effects of multiple corona reactor modes on pulse characteristics, energy transfer efficiency, and odor (H₂S and NH₃) removal were investigated experimentally by the wire-plate corona reactor(s). The removal efficiency of H₂S was only 91% and the energy consumption was 16.1 Wh m⁻³ by the single mode with a gas-flow rate of 23 m³ h⁻¹ and an initial concentration of 200 mg m⁻³. At the same experimental conditions, almost 100% removal efficiency was achieved and the energy consumption was only 12.8 and 14.9 Wh m⁻³ by the series and parallel modes. In the case of 50 mg m⁻³ NH₃ removal at the same gas-flow rate, the removal efficiencies with the single mode, the series and parallel modes were 64, 92 and 70%, respectively. The energy requirement did not increase at the same residence time under the experimental conditions of the single mode with a gas-flow rate of 11.5 m³ h⁻¹ and the series or parallel mode with a gas-flow rate of 23.0 m³ h⁻¹. The experimental results indicate that the series and parallel modes are effective in saving energy consumption, improving removal ability and efficiency, especially for the series mode.     

Improved neural networks based on genetic algorithm for pulse recognition

Pulse diagnosis is an important part of Chinese medicine and has played an important role in the development of Chinese medical science. However, the pulse is traditionally determined by cutting it off, which leads to a lack of objective standard pulse identification methods and affects their accuracy and feasibility. This research has studied and discussed the processing and identification of four kinds of pulse: normal pulse, wiry pulse, smooth pulse, and thready pulse. Four frequency-domain characteristics of the pulse wave and six kinds of wavelet scale energy characteristic information were extracted, and a three-layer BP (backprocessing) neural network was established. The LM (Levenberg–Marquard) algorithm and a genetic algorithm were used to improve the BP neural network, to train on and predict experimental samples, and to obtain classification accuracies of 90% and 95% respectively. Moreover, improved BP neural network based on a genetic algorithm has shown highly superior performance in terms of convergence speed and low error rate.     

测量脉冲大电流的四光路光学电流传感器技术

 在传统光学电流传感器技术的基础上，提出了一种四光路光学电流传感器，其通过四路输出信号可准确确定偏转角，使电流的测量范围不受正弦函数的单调性的限制，从而提高了电流的测量范围。配合四光路结构，提出了新的反正切函数数据处理方法，其不存在角度不灵敏区、可纠正原始数据的缺陷，从而提高了测量精度。实测了充电电压为4.5 kV、电容为50 μF和导线有效穿过磁光探头14次的快开快门的总短路电流，其峰值达85 kA，与理论值87 kA能较好地吻合，从而证明了四光路光学电流传感器可有效地测量脉冲大电流。     

Electroreduction of the antifouling agent TCMTB and its electroanalytical determination in tannery wastewaters

The electrochemical reduction of antifouling agent 2-thiocyanomethylthiobenzothiazole (TCMTB) was investigated by cyclic and pulse differential voltammetry. The irreversible electrode reduction of TCMTB proceeded by ECEC reaction mechanism by two electrons transfer with one irreversible wave. Upon the basis of electrochemical evidence, the electrodic reaction mechanism was suggested to formation of mercaptobenzothiazole (MTB) in solution.Subsequently, a pulse differential method is described for the formation of TCMTB based on this electroreduction. Having been obtained a detection limit of 1.0 × 10⁻⁷ mol L⁻¹ and recovery to 98% to concentration of 2.0 × 10⁻⁶ mol L⁻¹. Therefore, the proposed method in this study is practical, sensitive and accurate for the analysis of TCMTB in tannery wastewater samples.     

Glow discharge mass spectrometry

Over the past twenty years or so, glow discharge mass spectrometry (GDMS) has become the industry standard for the analysis of trace elements in metals and semiconductors. A review of its history is followed by a picture of the present situation and a look to where the future may lie. Applications are summarised, including the ability of GDMS to offer depth-resolved data and non-conductor analysis, and the well-documented quantitative nature of the results is reviewed. The effects resulting from the physical properties of the analyte material are discussed at length. Finally, recent work such as fast flow sources and pulsed glow discharges is reviewed.     

The use of phase codes in ultrasound imaging: SNR gain and bandwidth requirements

Most of the literature on coded excitation describes the signal-to-noise ratio gain of a coded waveform in terms of the time-bandwidth product. We have shown that in the context of ultrasound imaging, the expression for the SNR gain provided by matched filtering a coded waveform, can be reduced to the total number of chips in the transmit signal. Hence, the SNR gain is independent of both the bandwidth and the duration of a single-chip. This concept is described in detail, clarifying this seeming contradiction. The impact of bandwidth and pulse duration on the SNR, SNR gain and axial resolution is described. Bandwidth requirements and the impact of regulatory peak-power limitations are also addressed.     

捷联惯导系统的空中标定方法

从工程实用和维护的角度出发,提出了一种针对机载捷联式系统的空中标定方法。该方法依据捷联惯导系统级标定的基本原理,使用卡尔曼滤波作为估计手段,惯性器件常值漂移、刻度系数误差及惯导系统基本误差项作为状态量,依据外部GPS信息作为观测基准,通过设定的飞行机动动作对各待标定误差项进行激励。仿真卡尔曼滤波结果表明,依据飞机实际运动过程设计的简单飞行轨迹即可以实现对所有误差项的有效激励,各误差项随飞行过程进行逐步收敛。这种系统级空中标定方法不需要飞机作特殊的机动动作,在实际工程中易于实现,且经过一个架次的飞行就可以对惯导系统进行一次标定补偿。     

QCW diode-pumped 654 W AO Q-switched Nd:YAG rod oscillator-amplifier laser

A diode laser-pumped acoustic-optic Q-switched Nd:YAG master-oscillator power amplifier laser is presented. The laser is quasi continuously pumped at 1.1 kHz with a pulse width of 172 μs, and the ultrasonic frequency of the AO Q-switcher is set at a higher value (53 kHz). The master oscillator is designed as a thermally near-unstable-resonator, which presents an average output power of 48 W with a beam quality value of M² = 1.41 and a Q-switching pulse duration of 121 ns. The maximum average power of the MOPA system is 654 W, and the beam quality is M² = 6.