Synthesis of silver nanoparticle in imidazolium and pyrolidium based ionic liquid reverse micelles: A step forward in nanostructure inorganic material in room temperature ionic liquid field

Two silver salts, silver tetrafluoroborate and silver trifluoromethanesulfonate were dissolved in two different room temperature ionic liquids (RTILs), 1-Butyl-3 methyl imidazolium tetrafluoroborate ([Bmim][BF₄]) and 1-Butyl-1 methyl pyrrolidinium trifluoromethanesulfonate ([Bmpy][Tfms]). Triton x-100 (TX-100) surfactant and cyclohexane as nonpolar medium are used to dissolve these RTILs to create reverse micellar system. Pure reverse micellar system is characterized by dynamic light scattering (DLS) measurement. These pure RTIL reverse micellar systems are used to prepare stable silver nanoparticle solution without using any other auxiliary solvent in the whole process.     

Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.     

成分和厚度的依赖

通过调整Mn的成分，系统地研究了Ni81Fe19/Ni100-xMnx双层膜的磁学性质，特别是交换偏置场(Hex)的变化.当Ni100-xMnx中Mn的原子百分比在534%到600%之间时，对于150nm的Ni81Fe19，得到了最大的交换偏置场175kA/m，同时由于Mn对Ni81Fe19层的扩散所造成的磁矩的降低小于20%；高角x射线衍射证明Ni100-xMnx的晶格常数随着Mn成分的改变而变化，Mn含量越多，其晶格常数越大；制备态Ni100-xMnx膜晶格常数与θ相NiMn膜晶格常数的接近程度与NiMn膜θ相形成的容易程度相对应.也研究了交换偏置场随着Ni１００-xMnx厚度的变化，第一次得到了当Ni100-xMnx中Mn的原子百分比为706%时，Ni81Fe19(150nm)/Ni100-xMnx(90nm)双层膜在经过240℃，5h退火后，可以有80kA/m的交换偏置场，此时铁磁层磁矩的大小几乎不变. 关键词： Ni81Fe19/Ni100-xMnx 交换偏置场     

原子分子在Pt(100)表面吸附的第一性原理研究

本文系统研究了H、N、O、C、S等原子,N_2、NH_3、NO、CO等分子和CH_3、CH、CH_2和OH等自由基在Pt(100)表面的吸附.从能量上来看,吸附能力从小到大的顺序是N_2NH_3COCH_3NOHOHNCH2OSCHC.原子类吸附物中H、N、O的最稳定吸附位均为桥位,而S、C则倾向于四重空位.所研究的分子吸附物(N_2、NH3、CO、NO),N_2和NH_3有且只有一种顶位吸附结构,CO和NO均优先吸附在空位.自由基吸附物(CH、CH_2、CH_3、OH)在Pt(100)表面上的吸附,CH_3优先吸附在顶位,CH_2、OH它们的最稳定吸附位均为桥位.原子、分子和自由基吸附后,会引起Pt(100)原子层间距的改变.     

机械合金化Fe100-xCux体系的X射线吸收精细结构研究

利用X射线吸收精细结构(XAFS)方法研究机械合金化制备的Fe_100-xCu_x(x=0,10,20,40,60,70,80,100,x为原子百分比)合金中Fe和Cu原子的局域环境结构.对于Fe_100-xCu_x(x≥40)二元混合物,球磨160h后,Fe原子的近邻配位结构从bcc转变为fcc,但Cu原子的近邻结构保持其fcc不变.与之相反,在Fe₈₀Cu₂₀和Fe₉₀Cu₁₀(x≤20)合金中,Fe原子的近邻配位保持其bcc结构而Cu原子的近邻配位结构从fcc转变为bcc结构.XAFS结果还表明,fcc结构的Fe_100-xCu_x样品中Fe的无序因子σ(0.0099nm)比bcc结构的Fe_100-xCu_x中的σ(0.0081nm)大得多;并且在机械合金化Fe_100-xCu_x(x≥40)样品中Fe原子的σ(0.0099nm)比其Cu原子的σ(0.0089nm)大.这表明机械合金化Fe_100-xCu_x样品中Fe和Cu原子可以有相同的局域结构环境但不是均匀的过饱和固溶体,而是由Fe富集区和Cu富集区组成的合金.我们提出互扩散和诱导相变机理来解释在球磨过程中Fe_100-xCu_x合金产生从bcc到fcc和从fcc到bcc变化的结构相变 关键词： XAFS 100-xCu_x合金')" href="#">Fe_100-xCu_x合金 机械合金化     

Cosmic history of the Bragin pallasite: evidence from the fission-track analysis

Chronology is rather a weak point in the investigation of pallasites, the stony-iron meteorites. No chronological data are known for the Bragin pallasite. Our attempt to reconstruct its cosmic history was based on the interpretation of fission-track analysis data. To apply this method only uranium-rich phosphates can be used. Extremely rare grains of stanfieldite were extracted from the silicate sawing residue and from the pallasite sample directly.

The researches pursued by us made it possible to find two populations of fossil tracks in stanfieldite grains. The tracks of these populations strongly differed both in size, shape and character of distribution. The first population, consisting of short (L2–6 μm instead of L8–12 μm for induced fission tracks), round-shaped tracks irregularly distributed, as we suppose, suffered an intense heating process, which caused a significant amount of partial annealing. The second population, consisting of longer (L8–12 μm), rhombic-shaped tracks homogeneously distributed, occurred after this thermal event. Only the second population track density was used for the fission-track age calculation.

After correction of the fossil track density, consisting of the second population tracks, for other possible track sources, the revealed tracks were unequivocally identified as those due to the spontaneous fission of ²⁴⁴Pu and ²³⁸U. The largest part of them was attributed to the spontaneous fission of ²⁴⁴Pu; ρ_Pu/ρ_U≈3. The model fission-track age of the studied pallasite turned out to be 4.20 Gyr. This value fix the time of the last shock/thermal event in the cosmic history of the Bragin pallasite, which had caused the partial annealing of tracks presented to that time and “fission-track clock” reset.     

聚乙二醇类表面活性剂对硅表面无电沉积Ag膜光滑作用研究

应用原子力显微镜技术及开路电位～时间谱技术,研究了非离子表面活性剂聚乙二醇2000,6000,20000对硅(100)表面无电沉积银膜的光滑作用.实验表明硅(100)表面无电沉积银的光滑程度以及镀层的质量均随聚乙二醇聚合度的增加而变好.     

Analytical Methods for the Determination of 90Sr and 239,240Pu in Environmental Samples

Artificial long-lived radionuclides such as ⁹⁰Sr and ^239,240Pu have been long released into the environment by human nuclear activities, which have a profound impact on the ecological environment. It is of great significance to monitor the concentration of these radionuclides for environmental safety. This paper summarizes and critically discusses the separation and measurement methods for ultra-trace determination of ⁹⁰Sr, ²³⁹Pu, and ²⁴⁰Pu in the environment. After selecting the measurement method, it is necessary to consider the decontamination of the interference from matrix elements and the key elements, and this involves the choice of the separation method. Measurement methods include both radiometric methods and non-radiometric methods. Radiometric methods, including alpha spectroscopy, liquid scintillation spectrometry, etc., are commonly used methods for measuring ^239+240Pu and ⁹⁰Sr. Mass spectrometry, as the representative of non-radiometric measurement methods, has been regarded as the most promising analytical method due to its high absolute sensitivity, low detection limit, and relatively short sample-analysis time. Through the comparison of various measurement methods, the future development trend of radionuclide measurement is prospected in this review. The fully automatic and rapid analysis method is a highlight. The new mass spectrometer with ultra-high sensitivity shows strong analytical capabilities for extremely low concentrations of ⁹⁰Sr, ²³⁹Pu, and ²⁴⁰Pu, and it is expected to develop determination methods with higher sensitivity and lower detection limit.     

泛系哲学与泛系数学和应用:事理,物理,技理,医理与战理(Ⅱ)

这里从泛系观引入一种新型的哲学与数学研究,包括在泛系框架下发展哲学七论与数学和一些第二第三哲学以及对事理、物理、技理、医理与战理的某些应用.     

A Model Calculation for the Isomerization and Decomposition of Chemisorbed HCN on the Si(100)-2×1 Surface

Ab initio molecular orbital and hybrid density functional theory calculations have been performed to study the adsorption, isomerization, and decomposition of HCN on Si(100)-2×1 using the Si₉H₁₂ cluster model of the surface. The results of our calculations indicate that the HCN can adsorb molecularly without a barrier onto the surface with both end-on (LM1) and side-on (LM2) positions. LM1 can isomerize to LM2 with a small barrier of 8 kcal/mol. The isomerization of LM2 by H-migration from C to the N atom, requires 76 kcal/mol activation energy (c.f. 47.5 kcal/mol in the gas phase) because of surface stabilization. Both HCN(a) and HNC(a) end-on adsorbates were found to dissociate readily, as concluded in our earlier experiment, to produce H and CN adspecies. The computed vibrational frequencies of HCN, CN, and also HCNH adspecies agree reasonably well with those observed experimentally. HCNH was found to be stable, with either the C or the N attaching to the surface.