Nanoscale resistive switching in SrTiO3 thin films

The local conductivity of SrTiO₃ thin films epitaxially grown on SrRuO₃‐buffered SrTiO₃ single crystals has been investigated in detail with an atomic force microscope equipped with a conducting tip (LC‐AFM). These experiments demonstrate that the conductivity of SrTiO₃ thin films originates from nanoscale well‐conducting filaments connecting the surface to the SrRuO₃ bottom electrode. The electrical conduction of the filaments is shown to be reversibly modulated over several orders of magnitude by application of an appropriate electrical field. We analyze the resistive switching by addressing individual filaments with the AFM tip as well as by scanning areas up to the µm scale. Temperature dependent measurements reveal that resistive switching on a macroscopic scale can be traced down to the insulator‐to‐metal transition of the independently switchable filaments. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Properties of the roughness in NiFe/FeMn exchange-biased system

X-ray reflectivity and atomic force microscopy analyses were performed in the Si/WTi (7 nm)/NiFe (5 nm)/FeMn (13 nm)/WTi (7 nm) exchange-biased system prepared by magnetron sputtering. Layer-by-layer analyses were done in order to have interfacial roughness parameters quantitatively. X-ray reflectivity results indicate that the successive layer deposition gives rise to a cumulative roughness. In addition, the atomic force microscopic images analyses have revealed that the roughness enhancement caused by the successive layer deposition can be associated with an appearance of a longer wavelength roughness induced by the NiFe layer deposition.     

Magnetic properties of R2WO6 (where R=Nd, Sm, Eu, Gd, Dy and Ho)

The magnetic and electrical measurements carried out on the R₂WO₆ tungstates showed a paramagnetic behaviour for samples with R=Nd, Gd, Dy and Ho and more complex one for samples with R=Sm and Eu in the temperature range 4.2-280 K and an insulating state at room temperature. With increasing atomic number of the R element the Curie-Weiss temperature increases from −43.5 K for Nd₂WO₆ to −2.7 K for Ho₂WO₆, excluding Sm₂WO₆ and Eu₂WO₆ compounds for that the Curie-Weiss region is not observed and the imaginary part of susceptibility is close to zero. The effective magnetic moment is close to the theoretical one for the free R ion and the magnetic moment measured in magnetic field of 14 T and at temperature of 4.2 K, generally, does not reach the saturation state. The temperature independent residual susceptibility is negative for Nd₂WO₆ and positive for the remaining compounds suggesting different proportions of the Landau, Pauli and van Vleck contributions to the total susceptibility. An increase of the orbital magnetic contribution to the total magnetic moment is suggested from the fitting of the Landé factor in the compounds under study.     

Pulsed plasma ion source to create Si nanocrystals in SiO2 substrates

A pulsed KrF excimer laser of irradiance of about 10⁸ W/cm² was utilized to synthesize Si nanocrystals on SiO₂/Si substrates. The results were compared with that ones obtained by applying low bias voltage to Si(1 0 0) target in order to control the kinetic energy of plasma ions. Glancing incidence X-ray diffraction spectra indicate the presence of silicon crystalline phases, i.e. (1 1 1) and (2 2 0), on SiO₂/Si substrates. The average Si nanocrystal size was estimated to be about 45 nm by using the Debye-Scherrer formula. Scanning electron microscopy and atomic force microscopy images showed the presence of nanoparticles of different size and shape. Their distribution exhibits a maximum concentration at 49 nm and a fraction of 14% at 15 nm.     

Effects of H2 ambient annealing in fully 0 0 2-textured ZnO:Ga thin films grown on glass substrates using RF magnetron co-sputter deposition

Gallium doped zinc oxide (ZnO:Ga) thin films were grown on glass substrates using RF magnetron co-sputtering, followed by H₂ ambient annealing at 623 K to explore a possibility of steady and low-cost process for fabricating transparent electrodes. While it was observed that the ZnO:Ga thin films were densely packed c-axis oriented self-textured structures, in the as-deposited state, the films contained Ga₂O₃ and ZnGa₂O₄ which had adverse effect on the electrical properties. On the other hand, post-annealing in H₂ ambient improved the electrical properties significantly via reduction of Ga₂O₃ and ZnGa₂O₄ to release elemental Ga which subsequently acted as substitutional dopant increasing the carrier concentration by two orders of magnitude. Transmittance of the ZnO:Ga thin films were all over 90% that of glass while the optical band gap varied in accordance with the carrier concentrations due to changes in Fermi level. Experimental observation in this study suggests that transparent conductive oxide (TCO) films based on Ga doped ZnO with good electrical and optical properties can be realized via simple low-cost process.     

Structure and morphology of Cu/Ni film grown by electrodeposition method: A study of neutron reflectivity and AFM

We present detailed study of structure and interface morphology of an electrodeposited Cu/Ni film using X-ray diffraction, X-ray reflectivity, neutron reflectivity and atomic force microscopy (AFM) techniques. The crystalline structure of the film has been determined by X-ray diffraction, which suggest polycrystalline growth of the film. The depth profile of density in the sample has been obtained from specular X-ray and neutron reflectivity measurements. AFM image of the air-film interface shows that the surface is covered by globular islands of different sizes. The AFM height distribution of the surface clearly shows two peaks and the relief structure (islands) on the surface in the film, which can be treated as a quasi-two-level random rough surface structure. We have demonstrated that the detailed morphology of air-film interfaces, the quasi-two-level surface structure as well as morphology of the buried interfaces can be obtained from off-specular neutron reflectivity data. AFM and off-specular neutron reflectivity measurements also show that the morphologies of electrodeposited surface is distinctively different as compared to that of sputter-deposited surfaces in the sample.     

Atypical grain growth for (2 1 1) CdTe films deposited on surface reconstructed (1 0 0) SrTiO3 substrates

The (1 0 0) SrTiO₃ substrate has emerged as the oxide substrate of choice for the deposition of a wide variety of materials. The substrate's unavoidable miscut leads to a step-terrace morphology when heated to high temperatures. This morphological transition is accompanied by an atomic scale repositioning of the uppermost terrace atoms, the nature of which is strongly dependent on the substrate temperature and ambient atmosphere used. Here, we report the deposition of CdTe films on the as-received and reconstructed surfaces of (1 0 0) SrTiO₃. The as-received substrate gives rise to a [1 1 1] CdTe film with four equally distributed in-plane grain orientations. The surface reconstruction, on the other hand, gives rise to an unprecedented reorientation of the film's grain structure. For this case, a [2 1 1] CdTe film emerges having twelve unevenly distributed in-plane orientations. We attribute the film's grain structure to an atomic scale surface reconstruction, with the anisotropic distribution of grain-types arising from a preferential formation due to the step edges.     

The origination of ill-defined layer in organic spin valves

The origination of ill-defined layer in organic spin valves was investigated by using atomic force microscopy (AFM) and Rutherford backscattering (RBS) analysis. It was found that conductive bulges of LSMO film and self-grown pinholes in Alq₃ film other than Co inclusions could lead to the formation of ill-defined layer. The morphology of LSMO substrate had a strong influence on that of Alq₃ film, LSMO/Alq₃ and Alq₃/Co interfaces. Moreover, Alq₃ film with the thickness of 1-4 nm could be barriers which was explained by small active area and added insulated layer in organic magnetic tunnel junctions.     

Effect of different Ge predeposition amounts on SiC grown on Si (1 1 1)

The SiC films were grown by solid source molecular beam epitaxy (SSMBE) on Si (1 1 1) with different amounts of Ge predeposited on Si prior to the epitaxial growth of SiC. The samples were investigated with reflection high energy electron diffraction (RHEED), atomic force microscopy (AFM), and X-ray diffraction (XRD). The results indicate that there is an optimized Ge predeposition amount of 0.2 nm. The optimized Ge predeposition suppress the Si outdiffusion and reduce the formation of voids. For the sample without Ge predeposition, the Si outdiffusion can be observed in RHEED and the results of XRD show the worse quality of SiC film. For the sample with excess amount of Ge predeposition, the excess Ge can increase the roughness of the surface which induces the poor quality of the SiC film.     

Characterization of CdTe films with in situ CdCl2 treatment grown by a simple vapor phase deposition technique

A unique vapor phase deposition (VPD) technique was designed and built to achieve in situ CdCl₂ treatment of CdTe film. The substrate temperature was 400 °C, and the temperature of CdTe mixture with CdCl₂ source was 500 °C. The structural and morphological properties of CdTe have been studied as a function of wt.% CdCl₂ concentration by using X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). XRD measurements show that the presence of CdCl₂ vapor induces (1 1 1)-oriented growth in the CdTe film. SEM measurements have shown enhance growth of grains, in the presence of CdCl₂. From AFM the roughness of the films showed a heavy dependence on CdCl₂ concentration. In the presence of 4% CdCl₂ concentration, the CdTe films roughness has a root mean square (rms) value of about 275 Å. This value is about 831 Å for the non-treated CdTe films.