Cavitands bearing four fluorophores

The synthesis of novel cavitands containing four fluorophores [tert-butoxycarbonyl protected 2,2′-bis(furyl)benzidine (t-BOC FurylBz) or 5,5′-bis(4-aminophenyl)-2,2′-bifuryl (t-BOC PFDA)] and ionophoric functional groups on the upper rim is reported. The cavitands bearing the four fluorophores emit blue light photoluminescence. In particular, the cavitand containing PFDA moieties exhibits a high photoluminescence quantum yield.     

气相色谱法研究配位化合物的热稳定性——ⅩⅢ.普鲁士蓝化合物的热分解及其加氢反应研究

普鲁士蓝化合物的热分解过程,可分为三个阶段:(1)脱水;(2)Fe³⁺还原至Fe²⁺;(3)C≡N^-键的断裂。H₂气中的热分解由于发生了一系列的加氢反应,分解产物及所对应的分解温度都不同于He气中的情况,其产物的种类增加,C≡N^-键的断裂温度降低。普鲁士蓝化合物中,CN^-呈典型的双端基配位,可看作是一种双金属配位的活化模型,与CN^-呈单端基配位的K₃[Fe(CN)₆]相比,C≡N^-键的活化程度增加,不仅断裂温度降低,且能发生更深度的加氢反应。     

Fourth-derivative spectrophotometric determination of neodymium in mixed rare earths with methyl thymol blue and cetylpyridinium chloride

A sensitive and selective method is described for the determination of neodymium in mixed rare earths using fourth-derivative spectrophotometry. The method is based on the absorption spectra of 4f electron transitions of the complex of neodymium with methyl thymol blue and cetylpyridinium chloride. The influence of various instrumental parameters and reaction conditions for maximum colour development are investigated. The calibration curve is linear over the range 0–3.5 g ml^–1 neodymium. The relative standard deviation for determination of 1.4 g ml^–1 neodymium (n = 7) is 1.6%. The detection limit (signal-to-noise ratio = 3) is 0.2 g ml^–1.     

Products of Ag+, Cu+ and Cu2+ Ion Implantation in the Surface of Polycrystalline Cadmium Sulfide as Photocatalysts for the Oxidation–Reduction Reaction of Methylene Blue with Formaldehyde

Semiconductor–semiconductor and molecule (molecular ion)–semiconductor products are formed upon the implantation of Ag⁺, Cu⁺, and Cu²⁺ ions in the CdS surface. Possible mechanisms were examined for their photocatalytic action in the reduction of methylene blue.     

A computational study of the LiH dimer

A theoretical study of the properties of the linear LiH dimer was undertaken. In this dimer, an unusual type of hydrogen bonding (termed "inverse" hydrogen bonding by some authors), which involves the hydrogen bonded molecule acting as an electron donor (rather than as a proton donor), is exhibited. The optimized geometry, dipole moment, interaction energy, atomic charges, harmonic vibrational frequencies, and frequency shifts for the dimer are computed at the SCF, MP2, and QCISD levels of theory using mainly a 6-31++G(d,p) basis set. We also examined the relative stability of the mono-deuterated isotopomers of linear (LiH)(2), i.e., Li-H...Li-D and Li-D...Li-H. Analysis of the normal vibrational modes, changes in the partial atomic charges, and changes in the vibrational frequencies of LiH on complexation were used to gain insight into the bonding and properties of the linear LiH dimer and its isotopomers.     

Novel visible-light-driven photocatalyst of NiO/Cd/g-C3N4 for enhanced degradation of methylene blue

Novel NiO/Cd/g-C₃N₄ photocatalysts were synthesized using a green and straightforward microwave-assisted method and characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The ternary NiO/Cd/g-C₃N₄ nanocomposites were evaluated for the degradation of methylene blue (MB) at room temperature under the visible light irradiation. Experimental results revealed that the weight percent of cadmium had a remarkable effect on the photodegradation efficiency. The NiO/Cd/g-C₃N₄ (0.1%) sample exhibited superior activity in the degradation reaction. The activity of this nanocomposite was about 4.5 and 3.25 fold higher than those of the pure g-C₃N₄ and NiO/g-C₃N₄ samples in the degradation of MB, respectively. The enhanced photocatalytic activity was attributed to the low energy gap, increased absorption capacity of the visible light, and efficient suppression of the recombination of photogenerated electron-hole pairs. A detailed photocatalytic mechanism over the nanocomposite of NiO/Cd/g-C₃N₄ (0.1%) was proposed with superoxide radical anion O₂^– as the main reactive species. The stability of the nanocomposite was confirmed after four consecutive runs as well.     

Potentiodynamic deposition of Prussian blue from a solution containing single component of ferricyanide and its mechanism investigation

Potentiodynamic techniques were used for the direct electrodeposition of Prussian blue nano-clusters from an acidic solution of ferricyanide. Electrochemical, EQCM, IR, AFM, and UV/vis measurements were carried out to characterize deposited nano-sized Prussian blue and to explore the formation mechanism. Results showed that ferricyanide could partially dissociate to free ferric and cyanide ions. The driving force of this dissociation is the formation of PB and the evolution of HCN. The optimal potential window for the potentiodynamic formation of PB from an acidic solution (pH 1.6) is between –0.5 V and 0.4 V. In addition, the influence of surface adsorption of CN^- ions on the formation of PB was discussed.Dedicated to Professor W. Vielstich on the occasion of his 80th birthday.     

Effect of carbon content on photocatalytic activity of C/TiO2 composite

A series of carbon-covered titania (CCT) were prepared via pyrolysis of sucrose highly dispersed on titania surface in flowing N₂. The samples were characterized by XRD, BET, DTA-TG, UV—Vis, and their photocatalytic properties were evaluated with two model pollutants, methylene blue (MB) and rhodamine B (RB), at room temperature. The effect of carbon content on photocatalytic activity of the C/TiO₂ composite was investigated. It was found that the effect of carbon content is different for different pollutants or different light sources. For three tested samples, under UV illumination CCT01 has the highest activity for MB photocatalytic degradation, while in the case of RB, CCT02 is the most active photocatalyst. Under visible light illumination, CCT005 has the highest activity for both MB and RB photocatalytic degradation. Translated from Chinese Journal of Catalysis, 2006, 27(1): (in Chinese)     

Enthalpies of adsorption of methylene blue and crystal violet to montmorillonite

Calorimetric measurements of the enthalpy of adsorption on montmorillonite indicate different patterns for methylene blue (MB) and crystal violet (CV). The enthalpy of adsorption of MB is endothermic up to 73% of the cation exchange capacity (CEC) (i.e., about 0.6 mmol g^-1 clay), whereas at higher adsorption ratios the adsorption reaction becomes exothermic. The enthalpy of adsorption of CV is exothermic for all amounts adsorbed. These results were confirmed with adsorption experiments that prove that adsorption of MB increase with temperature, whereas CV adsorption decreases. This behavior indicates changes in the equilibrium coefficient according to Van't Hoff's equation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Arsenite oxidation and arsenate determination by the molybdene blue method

Based on the similarity in properties of arsenate and phosphate, the colorimetric method using the molybdene blue complex was tested in order to determine low As(V) concentration in waters. The influence of complex formation time, daylight, temperature and competitive anions (silicate and sulphate) upon complex formation was determined. Optimal complex formation was reached in 1 h at 20±1 °C and was slightly favoured when developed in daylight. The formation rate declined with decreasing reaction temperature and no influence of any of the competitive anions tested (at concentrations usually found in natural waters of granitic areas) was noted. The detection limit of this method was 20 μg As(V) l⁻¹. This simple, fast and sensitive arsenic determination method is suitable for field analysis, especially for waters containing low levels of phosphate and organic matter. Through arsenate determination, this colorimetric method allowed the arsenite oxidation efficiency of five common industrial oxidants to be compared. H₂O₂ and MnO_2(s) were not considered as effective oxidants as a high excess was necessary to ensure As(III) oxidation. NaOCl and KMnO₄ were promising oxidants as they allowed complete arsenite oxidation with a small excess for NaOCl or even less than the electron stoichiometric ratio in the case of KMnO₄. FeCl₃ was the most effective oxidant among the reagents tested here.