Improved method for loss measurements in planar waveguides

A method employing an isosceles prism and a right-angle one is developed for loss measurement in planar waveguides. During the measuring process, the isosceles prism is fixed and the right-angle prism fixed on the waveguide slides by following the waveguide. Only by adjusting the gap thickness we can realize the loss measurement in planar waveguides. The method is demonstrated with an Ag/Na ion-exchanged waveguide fabricated on BK7 glass from AgNO₃ melt diluted with NaNO₃ (mass ratio 1:9), with the condition of 4 h and . The experimental results show that the method has the advantages on convenient operation, accurate results and no required end polishing.     

Implementation of a nonlinear filter for online nuclear counting

Nuclear counting is a challenging task for nuclear instrumentation because of the stochastic nature of radioactivity. Event counting has to be processed and filtered to determine a stable count rate value and perform variation monitoring of the measured event. An innovative approach for nuclear counting is presented in this study, improving response time and maintaining count rate stability. Some nonlinear filters providing a local maximum likelihood estimation of the signal have been recently developed, which have been tested and compared with conventional linear filters. A nonlinear filter thus developed shows significant performance in terms of response time and measurement precision. The filter also presents the specificity of easy embedment into digital signal processor (DSP) electronics based on field-programmable gate arrays (FPGA) or microcontrollers, compatible with real-time requirements. © 2001 Elsevier Science. All rights reserved.     

QED corrections and chemical properties of Eka-Hg

In this paper, we present a family of coupled higher-order nonlinear Schr?dinger equation describing the optical soliton pulse propagating in inhomogeneous optical fiber media. The exact N-soliton solution and its characteristics of stabilities and novel elastic collision properties are studied in detail. As an example, we give the relative numerical evolutions by a soliton control system to discuss the pulses propagation characteristics.     

Propagation properties of beams generated by Gaussian mirror resonator in uniaxial crystals

Based on the paraxial vectorial theory of beams propagating in uniaxially anisotropic media, we have derived the analytical propagation equations of beams generated by Gaussian mirror resonator (GMR) in uniaxial crystals, and given the typical numerical example to illustrate our analytical results. Due to the anisotropy crystals, the ordinary and extraordinary beams originated by incident beams generated by GMR propagate with different diffraction lengths, thus the linear polarization state and axial symmetry of the incident beams generated by GMR do not remain during propagating in crystals.     

基于ARM的嵌入式超声传播时间测量装置

应用超声波检测技术进行检测时,通常需对超声波在介质中的传播时间进行精准的测量,为精准测量超声波的传播时间,设计了一套基于ARM的嵌入式超声传播时间测量装置。该装置电路运行稳定,成本低廉,采用多次测量结果取算数平均值的方法以减小随机干扰,采用参比方法放置接收探头以消减电路中电子器件的延时。通过对实验结果进行分析,得出该装置可精准测量超声波在实验试块中的传播时间且满足设计要求,分辨率可达一纳秒。     

Optical sensing characteristics of the photonic crystal fiber filled with magnetic fluid

A novel photonic crystal fiber sensing theory filled with magnetic fluid is proposed based on the change of the MF refractive index under varied magnetic field. The magnetically induced tuning of the magnetic fluid filled PCF propagation properties were investigated by the full-vector finite element method with a perfectly matched layer. Theoretical calculations show that both the effective refractive index and the effective mode area increase vs. the increased magnetic field, and the PCF filled MF with larger d/Λ is more sensitive to magnetic field. When the wavelength λ = 1550 nm, the duty ratio d/Λ = 0.9, d/Λ = 0.6, the effective refractive indexes increase respectively from 1.598279 to 1.617572, from 1.61948 to 1.632484, and the effective mode areas increase respectively from 3.561115 μm² to 7.052360 μm², from 6.167494 μm² to 37.221998 μm² as the magnetic field changes from 25 Oe to 175 Oe. This scheme provides theoretical foundation to use magnetic field to control light in photonic crystal fiber and also offers a potential method for magnetic field sensing based on the TIR-PCF.     

High-frequency acoustic emissions generated by a 20 kHz sonochemical horn processor detected using a novel broadband acoustic sensor: a preliminary study

This paper describes the application of a novel broadband acoustic sensor to evaluating the acoustic emissions from cavitation produced by a typical commercial 20 kHz sonochemical horn processor. Investigations of the reproducibility of the processor, and of the variation in cavitation emissions as a function of output setting and sensor location are described, and resulting trends discussed in terms of the broadband integrated power in the megahertz frequency range. Companion studies with a conventional membrane hydrophone have illustrated for the first time that cavitation emissions produced by a sonochemical horn processor can extend to frequencies beyond 20 MHz, and the sensor shows that significant nonlinearity can be seen in measured cavitation activity with increasing nominal output power.     

Nonparaxial Lorentz and Lorentz-Gauss beams

The Lorentz and Lorentz-Gauss beams are extended to the nonparaxial regime. Analytical propagation expressions of nonparaxial Lorentz and Lorentz-Gauss beams in free space are derived, and the propagation of paraxial Lorentz and Lorentz-Gauss beams is treated as a special case of our general results. The propagation properties of Lorentz and Lorentz-Gauss beams are illustrated and compared with numerical examples.     

Hollow elliptical Gaussian beams generated by a triangular prism

Based on the tensor method, an analytical formula for hollow Gaussian beams (HGBs) generated by a triangular prism has been derived, and the propagation properties have been studied. It is shown that hollow elliptical Gaussian beams (HEGBs) can be obtained in the near field after the prism, and that the eccentricity of the output beam is affected by parameters such as the incidence angle, refractive index of the prism and the order of the HGB. It shows that by using a triangular prism one can conveniently obtain HEGBs.