浅议物理实验教学环节改革

为进一步提高大学物理实验的教学质量，本文就实验课的预习、操作、实验报告的撰写及考核方法进行了探讨。     

Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.     

定位定量检测光电内窥系统

本文分析定位定量窥测系统设计中普遍存在的问题,提出一种检测方案,并预示窥测仪器的发展趋势。     

Recognition of ring pairs in the data analysis of Cherenkov detectors

We present a new algorithm for the identification of ring pairs in Cherenkov detectors. The approach combines linear regression methods for the construction of an appropriate reference quantity, methods from statistics for the evaluation of hypotheses and Monte Carlo simulation runs for the tuning of threshold levels.     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

中子成像技术在元素分析中的应用

中子成像作为一种快速、直观的无损检测技术,在核工业、航空航天、新能源、地质、考古、先进制造等多个领域得到广泛应用。中子成像利用中子不带电、穿透能力强、对轻元素敏感、可区分同位素和近邻元素等特性,非常适合开展含氢元素、近邻元素和同位素等材料的无损检测。本文概述了中子成像技术的基本原理及特点,并结合中国先进研究堆(CARR)中子成像装置上的应用案例, 重点介绍了国内外中子成像技术在储氢材料、燃料电池、岩石、核燃料元件、古代文物等领域的典型应用。随着中子成像技术的不断发展和广泛应用,有望为我国更多领域研究提供更强有力的技术支撑。     

基于有限元模拟的超声应力系数标定及分析*

应力系数的标定作为超声应力检测最为关键的环节,直接决定应力检测结果的准确性。传统的应力系数试验标定对于被测物的表面粗糙度、耦合剂厚度、声匹配块与被测物接触力等因素十分敏感,但缺少基本参照值。基于COMSOL建立多物理场耦合的超声应力检测模型,施加不同的拉伸载荷,计算临界折射纵波到达时间与不同应力值之间的关系,模拟标定45#钢的超声应力系数为13.7MPa/ns。单轴水平拉伸试验标定的45#钢应力系数为16.5MPa/ns。结果表明,通过两种方法标定的应力系数较为接近,试验标定的应力系数偏大,这是由于有限元方法能够消除试验过程中各种不确定因素对声时精确测量所造成的影响,能够更加纯粹的反映材料的声弹性效应,因此具有作为基础数据的参考价值。有限元方法作为传统试验方法的补充,可以减小试验标定数据的离散性,提高超声应力检测结果的可信度。     

圆柱类构件超声相控阵聚焦模型

在利用平面相控阵超声换能器对圆柱类构件检测时,受曲界面结构引起的入射波和回波时延的影响,扫描声束的波阵面产生弯曲,在利用传统迭代遍历算法计算延迟时间时效率低,无法发挥相控阵换能器检测优势。针对上述问题,建立了一种基于圆柱类构件特征和耦合介质特性的超声相控阵扫描成像的聚焦模型。该模型基于换能器、耦合介质、圆柱类构件材料特性和几何关系以及声线模型和折射定律,建立了耦合介质及被检构件的声速、曲面曲率半径、阵列与曲面间的距离等关联的延迟时间聚焦控制模型。利用该模型计算出的延时时间,对各阵元发射时间进行控制,从而实现扫描声束的聚焦。该文以液体和有机玻璃制介质楔块为例,对圆柱钢曲面的相控阵声束聚焦进行了仿真实验,结果表明该文方法计算效率显著提升,同时声束可以在预设位置实现聚焦,验证了该模型在计算效率上的优势与有效性。     

一种三次非旋转对称的相位板的检测系统设计

作为零位干涉检测方法中非常有前途的一种方法.计算全息可以用于非旋转对称的非球面的检测.以三次相位板为例,阐述了利用计算全息图检测非旋转对称的非球面的基本原理.分析并推导了三次相位传播过程引入的高阶波像差的理论公式,给出了三次相位板的检测系统的没计结果.详细讨论了计算全息图衍射级次的分离以及计算全息图的二元化,给出了振幅型的计算全息图的图样.计算全息图的刻线最小问隔是40μm,计算全息图的制作精度对检测结果的波前误差的影响仅仅为0.005λ.对检测系统作了详细的公差分析,结果表明所有调整公差对整个检测系统的影响和方根值为83.954 nm.