LNG船用BOG再液化装置工艺流程模拟

文中运用工程模拟计算软件ASPEN PLUS对LNG船用蒸发气体(BOG)再液化装置工艺流程进行了较全面和深入的模拟计算.通过对模拟计算结果进行分析,得到用丙烯预冷的再液化工艺流程中的主要工艺设备运行参数:海水冷凝器冷凝温度、BOG压缩机出口压力、丙烯压缩机出口压力以及混合制冷剂压缩机出口压力对再液化效率和能耗有着不同...     

CCD紫外增强薄膜旋涂法工艺优化

在硅基探测器的入射窗上制备荧光下转换薄膜,是一种有效降低成本的紫外荧光增强技术。从理论上探讨了由聚二甲基硅氧烷与颜料黄101混合胶体的紫外荧光薄膜旋涂工艺参数与性能之间关系,搭建紫外荧光薄膜应用于光谱分析的性能测试实验平台,对紫外荧光增强薄膜旋涂工艺参数质量配比、旋涂转速进行优化。光谱分析探测器有两个主要指标,光谱响应灵敏度和光谱分辨率,分析与实验结果表明,利用旋涂法制备紫外增强荧光薄膜,旋涂转速将直接影响薄膜的厚度、表面粗糙度和荧光物质的分布,从而影响光谱分析系统的分辨率;紫外荧光增强薄膜的增强效率与荧光溶剂聚二甲基硅氧烷与荧光物质颜料黄101的质量比密切相关,质量比低无法满足对紫外响应效率的提高,但高质量比,荧光物质处在聚集态荧光自猝灭严重,也不利于增强薄膜的紫外响应效率。最终,在薄膜旋涂工艺优化的基础上,旋涂转速2 500～3 000 r·min-1,荧光物质与荧光溶剂质量比为7∶100制备出紫外荧光增强薄膜。汞灯特征光谱测试结果表明该薄膜313 nm紫外波长处探测响应灵敏度提高了1.6倍左右,对比分析镀膜前后特征光谱的半波带宽,镀制紫外增强荧光薄膜对其影响很小。     

响应面方法计算HTR-10余热排出系统物理过程的失效概率

在核电站安全研究中，概率安全评价方法已经得到了广泛的应用.但是对于采用非能动设计的核电站系统，其可靠性分析的研究还处于初级阶段.非能动系统的失效不但要考虑常规可靠性分析中考虑的设备失效，还要考虑物理过程的失效.物理过程失效概率的计算方法和能动系统可靠性分析方法完全不同.本文给出物理过程失效的数学描述，介绍了一次二阶矩法、响应面方法，并且应用响应面方法计算了清华大学核能技术设计研究院10MW高温气冷实验堆(HTR-10)余热排出系统失效概率的近似值. 关键词： 概率安全评价 非能动系统 可靠性 响应面     

大气消光特性与机载激光雷达眼睛安全关系的研究

依据美国ANSI标准，定量分析了气溶胶、卷云和沙尘的垂直消光特性对机载激光雷达激光脉冲眼睛安全最大阈值能量的影响；以地基激光雷达探测得到的合肥上空沙尘暴为例，定量给出了大气中各成分消光特性对飞机眼睛安全最低高度的影响；模拟计算了各种大气成分的消光特性对激光脉冲眼睛安全系数的影响随高度的变化规律。计算结果表明：沙尘层对激光脉冲眼睛安全最大阈值能量的影响幅度可达几十毫焦。该结果为我国第一台机载大气探测激光雷达激光脉冲能量设置提供了基本依据。     

不同生境半夏及炮制半夏中鸟嘌呤核苷的含量测定

采用反相高效液相色谱法测定不同生境半夏和炮制半夏中鸟嘌呤核苷的含量.不同生境的半夏中鸟嘌呤核苷的含量并无差异,但炮制半夏中鸟嘌呤核苷含量较生品均有不同幅度下降.从水溶性成分鸟嘌呤核苷的含量看,种植半夏质量并不比野生半夏质量差;半夏在炮制过程中水溶性成分有所损失.     

Boundary coupled dual-equation numerical simulation on mass transfer in the Process of laser cladding

The coupled numerical simulation on fluid flow, heat transfer, and mass transfer in the process of laser cladding is undertaken on the basis of the continuum model.In the simulation of mass transfer in the laser molten pool, the concentration distribution in the regions on different sides of the interface between cladding layer and substrate is calculated separately and coupled at the co-boundary.The non-equilibrium solute partition coefficient is obtained from equilibrium solute partition coefficient according to the Sobolev model.By using the developed software which is based on the commercial software PHOENICS 1.4, the distribution of Fe in laser molten pool in an experiment of cladding Stellite 6 on 12CrMoV is calculated.The obtained results well coincide with the experimental ones.     

Residues,dissipation and risk evaluation of spiroxamine in open-field-grown strawberries using liquid chromatography tandem mass spectrometry

The dissipation dynamic and residues of spiroxamine in open-field-grown strawberries were determined using liquid chromatography tandem mass spectrometry (LC–MS/MS). Spiroxamine application was performed according to Egyptian good agricultural practices recommendation. A QuEChERS-based extraction method along with direct analysis with an LC–MS/MS analytical method were optimized and validated, and the specificity of the techniques used was considered satisfactory. Good linearity (R² > 0.999) was obtained for spiroxamine within the range of 0.001–0.1 μg/ml. The mean recoveries varied between 97.1 and 108.2%, with inter- and intra-day precision (RSD) <4.9%. The limit of quantitation for spiroxamine was 0.001 mg/kg. The results indicated that spiroxamine degradation in strawberry followed first–order kinetics (R² > 0.9929) with an estimated half-life value of 4.71 days. Considering the Australian maximum residue limit (0.05 mg/kg) in strawberry and based on the results from residue trials with a preharvest interval of 14 days for strawberry, compliance can be expected. The present results could provide guidance to fully evaluate the risks of spiroxamine residues, preventing any potential health risk to consumers.     

实验室安全环保意识的调查与分析——以中山大学化学类专业学生为例

A survey about students' laboratory safety and environmental protection consciousness was performed in the freshmen majored in chemistry at Sun Yat-Sen University. Results showed that laboratory safety and environmental protection consciousness of most students' are weak. After analyzing the reasons, we put forward some suggestions. Cultivating students' laboratory safety and environmental protection consciousness should be carried out from several aspects such as emphasizing and regulating from school level, training in laboratory teaching, maintaining good cultural atmosphere of laboratory, as well as providing perfect laboratory safety and environmental protection facilities. We should guide students to actively learn knowledge and skills of laboratory safety and environmental protection in order to develop their good behavior and raise their consciousness.     

Enhanced process development using automated continuous reactors by self-optimisation algorithms and statistical empirical modelling

Reaction optimisation and understanding is fundamental for process development and is achieved using a variety of techniques. This paper explores the use of self-optimisation and experimental design as a tandem approach to reaction optimisation. A Claisen-Schmidt condensation was optimised using a branch and fit minimising algorithm, with the resulting data being used to fit a response surface model. The model was then applied to find new responses for different metrics, highlighting the most important for process development purposes.     

ITER高温超导电流引线的高安全分流器研究

电流引线是室温电源电缆与低温磁体之间的电连接部件.高温超导材料在液氮温度下具有零电阻率和低热导率的特性,用它做成的电流引线可以大大减小低温系统的热负荷,从而减少制冷设备投资及系统运行费.高温超导电流引线可以分为阻性换热器段和高温超导段两部分(其中还包括各部件间的连接部分).高温超导段的分流器设计关系到冷端热负荷大小以及超导段失超后的安全问题.为了研究国际热核聚变试验堆(ITER)电流引线高安全性能,专门设计、试验了68kA引线的1/90实验样品.本文通过对比全CuBe(cu-2%Be)分流器、全不锈钢分流器和二元分流器的失冷故障(LOFA)实验结果,证明二元分流器能够克服安全性和冷端漏热矛盾,可以满足ITER高安全性的要求.