THE RELATION BETWEEN STRENGTH AND RIGIDITY OF BEAM1)

本文提出了梁的强刚比的定义,用无量纲的形式定量地表达了梁的强度与刚度之间的关系,以期充分发挥材料的潜力并促进材料力学的课堂教学。强刚比与载荷大小无关,其数值可以通过有限元方法或者通过梁的载荷试验来获得。结合工程实际,从设计和试验两个方面对梁的强刚比 及其影响因素进行了简要地探讨和分析。     

大气消光特性与机载激光雷达眼睛安全关系的研究

依据美国ANSI标准，定量分析了气溶胶、卷云和沙尘的垂直消光特性对机载激光雷达激光脉冲眼睛安全最大阈值能量的影响；以地基激光雷达探测得到的合肥上空沙尘暴为例，定量给出了大气中各成分消光特性对飞机眼睛安全最低高度的影响；模拟计算了各种大气成分的消光特性对激光脉冲眼睛安全系数的影响随高度的变化规律。计算结果表明：沙尘层对激光脉冲眼睛安全最大阈值能量的影响幅度可达几十毫焦。该结果为我国第一台机载大气探测激光雷达激光脉冲能量设置提供了基本依据。     

XPS investigations of ruthenium deposited onto representative inner surfaces of nuclear reactor containment buildings

In the case of a hypothetical severe accident in a nuclear power plant, interactions of gaseous RuO₄ with reactor containment building surfaces (stainless steel and epoxy paint) could possibly lead to a black Ru-containing deposit on these surfaces. Some scenarios include the possibility of formation of highly radiotoxic RuO₄(g) by the interactions of these deposits with the oxidizing medium induced by air radiolysis, in the reactor containment building, and consequently dispersion of this species. Therefore, the accurate determination of the chemical nature of ruthenium in the deposits is of the high importance for safety studies. An experiment was designed to model the interactions of RuO₄(g) with samples of stainless steel and of steel covered with epoxy paint. Then, these deposits have been carefully characterised by scanning electron microscopy (SEM/EDS), electron probe microanalysis (EPMA) and X-ray photoelectron spectroscopy (XPS). The analysis by XPS of Ru deposits formed by interaction of RuO₄(g), revealed that the ruthenium is likely to be in the IV oxidation state, as the shapes of the Ru 3d core levels are very similar with those observed on the RuO₂·xH₂O reference powder sample. The analysis of O 1s peaks indicates a large component attributed to the hydroxyl functional groups. From these results, it was concluded that Ru was present on the surface of the deposits as an oxyhydroxide of Ru(IV). It has also to be pointed out that the presence of “pure” RuO₂, or of a thin layer of RuO₃ or Ru₂O₅, coming from the decomposition of RuO₄ on the surface of samples of stainless steel and epoxy paint, could be ruled out. These findings will be used for further investigations of the possible revolatilisation phenomena induced by ozone.     

NorTRACK product tracking system—development and implementation

This paper presents the experience gained by developers and users with implementation and operation of NorTRACK^TM, a real-time computerized product tracking system. A Programmable Logic Controller (PLC) collects and transfers data in real time to NorTRACK’s Oracle^TM database on a Windows NT^TM server network. After extensive development and Beta testing at MDS Nordion’s Canadian Irradiation Centre in Montreal, Canada, NorTRACK was installed in January 1997 with a new irradiation facility in Ethicon Endo-Surgery Inc.’s Albuquerque plant in the United States. NorTRACK communicates with the irradiator control and safety system, the plant's central manufacturing database, an innovative pallet staging and tote loading robot, and an automated dosimetry reading system. This integrated system allows the sterilization facility to monitor the irradiator operation and the flow of many products, through varied processing modes, continuously and reliably. As a result of operating with NorTRACK, both MDS Nordion’s CIC facility and the Endo-Surgery manufacturing site, are beginning to realize unique benefits in their respective operations. MDS Nordion is also initiating several future product enhancements and additional productivity modules. This paper describes the NorTRACK system, the various stages of the development project and Beta tests, and the experience of the users to date in their operations.     

Flexible software reliability growth model with testing effort dependent learning process

A lot of importance has been attached to the testing phase of the Software Development Life Cycle (SDLC). It is during this phase it is checked whether the software product meets user requirements or not. Any discrepancies that are identified are removed. But testing needs to be monitored to increase its effectiveness. Software Reliability Growth Models (SRGMs) that specify mathematical relationships between the failure phenomenon and time have proved useful. SRGMs that include factors that affect failure process are more realistic and useful. Software fault detection and removal during the testing phase of SDLC depend on how testing resources (test cases, manpower and time) are used and also on previously identified faults. With this motivation a Non-Homogeneous Poisson Process (NHPP) based SRGM is proposed in this paper which is flexible enough to describe various software failure/reliability curves. Both testing efforts and time dependent fault detection rate (FDR) are considered for software reliability modeling. The time lag between fault identification and removal has also been depicted. The applicability of our model is shown by validating it on software failure data sets obtained from different real software development projects. The comparisons with established models in terms of goodness of fit, the Akaike Information Criterion (AIC), Mean of Squared Errors (MSE), etc. have been presented.     

Applications of Fruit Polyphenols and Their Functionalized Nanoparticles Against Foodborne Bacteria: A Mini Review

The ingestion of contaminated water and food is known to cause food illness. Moreover, on assessing the patients suffering from foodborne disease has revealed the role of microbes in such diseases. Concerning which different methods have been developed for protecting food from microbes, the treatment of food with chemicals has been reported to exhibit an unwanted organoleptic effect while also affecting the nutritional value of food. Owing to these challenges, the demand for natural food preservatives has substantially increased. Therefore, the interest of researchers and food industries has shifted towards fruit polyphenols as potent inhibitors of foodborne bacteria. Recently, numerous fruit polyphenols have been acclaimed for their ability to avert toxin production and biofilm formation. Furthermore, various studies have recommended using fruit polyphenols solely or in combination with chemical disinfectants and food preservatives. Currently, different nanoparticles have been synthesized using fruit polyphenols to curb the growth of pathogenic microbes. Hence, this review intends to summarize the current knowledge about fruit polyphenols as antibacterial agents against foodborne pathogens. Additionally, the application of different fruit extracts in synthesizing functionalized nanoparticles has also been discussed.     

The analysis of process gases: a review

 A general review of key issues involved in the analysis of process gases is presented. The reasons for such measurements – which include safety, quality, environmental and economic factors are considered. The technical issues arising from these measurements are dependent upon a variety of factors, including the overall sampling system, the type of analytical instrumentation, methods of data collection and the specified calibration protocols. The use of gas calibration cylinders as transfer standards is detailed and issues of stability and traceability to reference material discussed. Received: 1 March 2000 / Accepted: 31 March 2000     

索赔次数为复合Poisson-Geometric过程的常利率风险模型的罚金函数

讨论了常利率下索赔次数为复合Poisson-Geometric过程的风险模型的罚金函数,得到了罚金函数的期望所满足的积分方程,并由所得到的积分方程推出了破产概率所满足的积分方程,初始盈余为0时,得到了罚金函数的期望及破产概率的精确解.     

Multi-level lot sizing and job shop scheduling with compressible process times: A cutting plane approach

This paper proposes an integer linear programming formulation for a simultaneous lot sizing and scheduling problem in a job shop environment. Among others, one of our realistic assumptions is dealing with flexible machines which enable the production manager to change their working speeds. Then, a number of valid inequalities are developed based on problem structures. As the valid inequalities can help in reducing the non-optimal parts of the solution space, they are dealt with as some cutting planes. The proposed cutting planes are used to solve the problem in (i) cut-and-branch, and (ii) branch-and-cut approaches. The performance of each cutting plane is investigated with CPLEX 12.2 on a set of randomly-generated test data. Then, some performance criteria are identified and the proposed cutting planes are ranked by TOPSIS method.     

Simulation of forming processes by FEM with a Bingham fluid model

We model the forming process as a fluid flow. A finite element program, FIDAP, which analyses flow problems, was used to calculate velocity and strain rates at points throughout the material during the deformation process. This allows predictions to be made on the shape and quality of the resulting part. The stress-strain relation we used models the plastic flow of metals (Bingham fluids). The FEM approximation of such a fluid is tested by comparing results for a simple analytical example. In forming processes provision must be made for friction between dye and workpiece, and the program was modified accordingly. Two classical ring forming simulations are compared to published results.