给定压力下纯铁材料的冲击相变与层裂特性研究

采用VISAR测量样品自由面速度剖面和回收样品观测分析联合技术,开展等厚对称碰撞实验,结合文献中的实验结果,研究了冲击加载压力大于纯铁材料冲击相变阈值约2~5 GPa和大于冲击相变阈值约10 GPa两种压力状态下纯铁材料的加卸载历程及各相区的变化,并从应力波相互作用的角度,指出了冲击加载压力略大于纯铁材料相变阈值约2 GPa时,等厚对称碰撞样品"反常"二次层裂与冲击相变及逆相变的关联机制。     

Krull–Gabriel Dimension of 1-domestic String Algebras

We classify the indecomposable pure injective modules over a wide class of -domestic string algebras and calculate the Krull–Gabriel dimension of these algebras.This paper was written during the visit of the second author to the University of Manchester supported by EPSRC grant GR/R44942/01.     

Use of thermo‐Raman spectroscopy and chemometric analysis to identify dehydration steps of hydrated inorganic samples—application to copper sulfate pentahydrate

In situ thermo‐Raman spectroscopy (TRS) measurements were performed in order to investigate solid‐phase transformation of the copper sulfate pentahydrate from room temperature up to 300 °C. Band‐target entropy minimization (BTEM), a blind‐source separation algorithm, was employed in order to identify and reconstruct the pure component spectra of the species involved in the dehydration process. In spite of low signal‐to‐noise ratio and elevated baseline spectral data, BTEM was successfully utilized to identify and reconstruct four pure component spectra of copper sulfate pentahydrate, trihydrate, monohydrate, and anhydrate, which were formed during this thermally induced process. Subsequent mapping of these four pure component spectral estimates back onto the preprocessed spectra yielded the relative concentrations of each individual species. Finally, the transition temperatures of each dehydration step could be unambiguously deduced from the obtained concentration profile. The current study shows that combined thermo‐Raman spectroscopy and chemometric analysis provides an effective tool to determine the dehydration temperatures as well as to identify the structures of each individual species involved in a solid‐phase dehydration process. Copyright © 2009 John Wiley & Sons, Ltd.     

强流脉冲电子束作用下金属锆的微观结构与应力状态

利用强流脉冲电子束 (HCPEB) 技术对金属纯锆进行表面处理, 采用X射线衍射, 扫描电子显微镜及透射电子显微镜详细分析了辐照诱发的表层微观结构和缺陷. X射线分析结果表明, HCPEB辐照后在材料表层诱发幅值为GPa量级的压应力, 并形成{0002}, {1012}, {1120}及{1013}织构. 表层微观结构观察表明, 与其他金属材料不同, HCPEB辐照在材料表层诱发的熔坑数量极少, 多次轰击甚至几乎没有表面熔坑的形成. 此外, 在快速的加热和冷却状态下, 在表面熔化层形成大量的超细晶粒结构, 同时诱发马氏体相变和强烈的塑性变形. 1次HCPEB辐照后表层内形成的变形微结构以位错为主, 孪晶数量较少; 5 次辐照样品的位错密度迅速增高, 孪晶数量也显著增加; 10次辐照后样品中的变形微结构以变形孪晶为主, 且出现二次孪晶现象. 表层晶粒内部变形的晶体学特征不仅决定了表层的织构演化行为, 而且还起到细化晶粒的作用, 为纯锆及锆合金表面强化提供了一条有效的途径. 关键词： 强流脉冲电子束 纯锆 微观结构 应力状态     

纯铜[0 1 1]倾侧型非共格∑3晶界结构稳定性分子动力学模拟研究

有研究表明, 非共格∑₃晶界的行为在中低层错能面心立方金属晶界 特征分布演化中发挥着重要作用. 为了掌握不同界面匹配的非共格∑₃晶界的特性, 本文利用分子动力学(MD)模拟方法首先研究了纯铜的[0 1 1]倾侧型 非共格∑₃晶界在700–1100 K温度范围内和常压下的结构稳定性. MD模拟采用原子间相互作用长程经验多体势, 步长为5×10^-15 s. 模拟结果表明: 所研究的五个非共格∑₃晶界, 其结构稳定性存在很大差异, 其一般规律是, 与(1 1 1)/(1 1 1)共格孪晶界之间的夹角(Φ角)越小, 晶界匹配值越大, 则非共格∑₃晶界越稳定; 反之亦然. Φ角最小的 (2 5 5)/(2 1 1)非共格∑₃晶界较稳定, 在退火过程中几乎不发生变化. 随着Φ角的增大, 非共格∑₃晶界不再稳定, 这类晶界会通过Miller指数较高一侧晶体每三层原子面合并为一层原子面 (或Miller指数较低一侧晶体每一层原子面分解为三层原子面)的机理 转变为亚稳的“台阶”状晶界, 台阶面部分地处于精确的能量极低 的{111}/{111}共格孪晶界上; 当提高温度退火时, 这种“台阶”状晶界最终会全部转变成稳定平直的{111}/{111}共格孪晶界. 关键词： 纯铜 ∑₃晶界')" href="#">非共格∑₃晶界 分子动力学模拟     

Wealth optimization and dual problems for jump stock dynamics with stochastic factor

An incomplete financial market is considered with a risky asset and a bond. The risky asset price is a pure jump process whose dynamics depends on a jump-diffusion stochastic factor describing the activity of other markets, macroeconomics factors or microstructure rules that drive the market. With a stochastic control approach, maximization of the expected utility of terminal wealth is discussed for utility functions of constant relative risk aversion type. Under suitable assumptions, closed form solutions for the value functions and for the optimal strategy are provided and verification results are discussed. Moreover, the solution to the dual problems associated with the utility maximization problems is derived.     

Investigation on the undercooling and crystallization of pure aluminum melt by DSC

The undercooling of pure aluminum melt was in situ investigated by differential scanning calorimeter with flux processing technique in this study. The highest undercooling of pure aluminum with 17.8 K was obtained as the thermal treatment temperature of the melt being 1033 K and the cooling rate being 50 K min^?1. When cooling rate is fixed, the undercooling depends on the melt processing temperature, and increases rapidly at the first stage. The effects of thermal treatment temperature and cooling rates on the undercooling are discussed in this article.     

Characterization of Mango Juice by High‐Resolution NMR,Hyphenated NMR,and Diffusion‐Ordered Spectroscopy

Abstract

The application of nuclear magnetic resonance (NMR) spectroscopy, hyphenated NMR, and diffusion‐ordered spectroscopy (DOSY) to the characterization of mango juice, as an example of a complex food mixture, is described. The compositional changes taking place as a function of ripening were followed, and selected metabolites were quantified by integration of the corresponding NMR peaks. In this way, an overall view of the metabolite changes is obtained, enabling the study of the biochemical mechanisms involved in the ripening process. More than 50 compounds were identified by 1D‐ and 2D‐NMR, but many ambiguous assignments remain due to spectral overlap or insufficient coupling information. The use of Liquid Chromatography (LC‐NMR) and LC‐NMR/Mass Spectrometry (MS) enables a fuller characterization of the soluble pectin fraction to be made; its dependence on ripening stage is discussed. Finally, DOSY adds information on the M_r of many metabolites, including the pectin fractions of ripe and unripe mango juices, and enables further peak assignments to be made.     

Absolutely Pure Covers

Absolutely pure modules act in ways similar to injective modules. There are conditions on a ring which guarantee that the class of injective modules will be covering. In this article, we define conditions on the ring R which guarantee that the class of absolutely pure modules will be covering. These include R being left coherent, which we show implies a number of other necessary properties.     

Development and application of SBA‐15 assisted electromembrane extraction followed by corona discharge ion mobility spectrometry for the determination of Thiabendazole in fruit juice samples

A new sample preparation method based on SBA‐15 assisted electromembrane extraction coupled with corona discharge ion mobility spectrometer was developed for the determination of Thiabendazole as a model basic pesticide in fruit juice samples. The addition of SBA‐15 in the supported liquid membrane in electromembrane extraction system not only can lead to enhancement of the effective surface area, but also introducing the negatively charged silanol groups into supported liquid membrane might improve migration of positively charged analytes toward the supported liquid membrane and finally into the acceptor solution. To investigate the effect of the presence of SBA‐15 in the supported liquid membrane on the extraction efficiency, a comparative study was carried out between the conventional electromembrane extraction and SBA‐15/electromembrane extraction methods. Under the optimized conditions, SBA‐15/electromembrane extraction method showed higher extraction efficiencies in comparison with conventional electromembrane extraction method. SBA‐15/electromembrane extraction method exhibited a low limit of detection (0.9 ng/mL), high preconcentration factor (167) and high recovery (83%). Finally, the applicability of SBA‐15/electromembrane extraction method was studied by the extraction and determination of Thiabendazole as a model basic pesticide in fruit juice samples.