基于XFEM的混凝土纯弯曲梁的裂缝扩展模拟研究

选取纯弯曲梁进行裂缝扩展研究,在理论上符合Ⅰ型断裂模式．因此,本文利用扩展有限元法(XFEM)模拟了混凝土纯弯曲梁裂缝发展的全过程,结合线性叠加渐进假定,得到了不同初始缝高比的P-δ曲线、P-CMOD曲线以及临界有效裂缝扩展长度(a_c-a₀)/h与裂缝发展路经．对比试验数据和模拟结果表明：随着初始缝高比的增大,起裂荷载P_ini、最大荷载P_max、离散弗雷歇距离δ_dF与δ_{d F}^′,以及临界有效裂缝长度(a_c-a₀)/h均逐渐减小;试验与模拟的裂纹发展路径存在一定偏差,可知试验数据与模拟结果存在规律性差异．     

电感耦合等离子体原子发射光谱(ICP-AES)法测定高纯铝中Fe、Cu、Mg、Zn、Ti

建立了用电感耦合等离子体原子发射光谱(ICP-AES)法测定高纯铝中Fe、Cu、Mg、Zn、Ti的方法。详细讨论了基体元素和共存元素对分析元素的光谱干扰,以及盐酸用量的影响;选择了合适的分析谱线,同时得出了各元素的检出限。证明用基体匹配的方法在Fe 259.940nm、Cu 327.396nm、Mg279.079nm、Zn 213.856nm、Ti 334.941nm处可准确、可靠地测定高纯铝中含量范围在0.001%~0.01%的Fe、Cu、Mg、Zn、Ti元素。     

An improved second moment method for solution of pure advection problems

The second moment numerical method (SMM) of Egan and Mahoney [Numerical modeling of advection and diffusion of urban area source pollutant. Journal of Applied Meteorology 1972; 11 : 312–322] is adapted to solve for the pure advection transport equation in a variety of flow fields. SMM eliminates numerical diffusion by employing a procedure that takes into account the first and second moments of mass distribution in each grid element. For pure translational flow fields, the method is conservative, positive definite and shape‐preserving. In rotational and/or shear flows, the accuracy of SMM is significantly reduced. Two improvements are presented to make the SMM applicable to a wider range of flow problems. It is shown that the improved SMM (ISMM) is less diffusive and more shape‐preserving than the SMM in rotational and/or deformational flows. The ISMM can also be used to solve for a color function in compressible flow fields. The computational efficiency of this method is compared with that of other methods and, for a given accuracy, it is shown that ISMM is a cost‐effective, non‐diffusive and shape‐preserving method. Copyright © 2000 John Wiley & Sons, Ltd.     

Photoautotrophic and Mixotrophic Cultivation of Polyhydroxyalkanoate-Accumulating Microalgae Consortia Selected under Nitrogen and Phosphate Limitation

Microalgae consortia were photoautotrophically cultivated in sequencing batch photobioreactors (SBPRs) with an alteration of the normal growth and starvation (nutrient limitation) phases to select consortia capable of polyhydroxyalkanoate (PHA) accumulation. At the steady state of SBPR operation, the obtained microalgae consortia, selected under nitrogen and phosphate limitation, accumulated up to 11.38% and 10.24% of PHA in their biomass, which was identified as poly(3-hydroxybutyrate) (P3HB). Photoautotrophic and mixotrophic batch cultivation of the selected microalgae consortia was conducted to investigate the potential of biomass and PHA production. Sugar source supplementation enhanced the biomass and PHA production, with the highest PHA contents of 10.94 and 6.2%, and cumulative PHA productions of 100 and 130 mg/L, with this being achieved with sugarcane juice under nitrogen and phosphate limitation, respectively. The analysis of other macromolecules during batch cultivation indicated a high content of carbohydrates and lipids under nitrogen limitation, while higher protein contents were detected under phosphate limitation. These results recommended the selected microalgae consortia as potential tools for PHA and bioresource production. The mixed-culture non-sterile cultivation system developed in this study provides valuable information for large-scale microalgal PHA production process development following the biorefinery concept.     

从混合态构造相应的系统-热库纠缠纯态的新方法

在量子统计学和低温物理学中,常用密度算符(或混合态)来表示物理系综.本文旨在提出一个新方法能将混合态转化为系统与热库相纠缠的量子纯态,这样做不但可以彰显环境对系统的影响,探寻新的物理态,尤其是纠缠态,而且能将求系综平均的复杂计算转化为较为简洁的求纯态平均.我们的新方法是将相干态和有序算符内的积分理论结合起来,就可直接将混合态扩充为自由度加倍的纯态.     

Manothermosonication (MTS) treatment of apple-carrot juice blend for inactivation of Escherichia coli 0157:H7

This study was performed to evaluate the responses of Escherichia coli 0157:H7 inoculated in an apple-carrot blended juice to manothermosonication (MTS) treatments. The MTS treatments were conducted in a continuous-flow MTS system. The juice samples were exposed to ultrasound treatment at combinations of three temperatures (60, 50 and 40 °C) and three pressure levels (100, 200, and 300 kPa) for five residence times (15, 30, 45, 60, and 75 s). The results showed that higher treatment temperature (i.e. 60 °C) and hydrostatic pressure in the MTS system significantly enhanced the microbial reduction. A FDA mandated 5-log CFU/ml reduction of E. coli 0157:H7 for juice processing was achieved in 30 s for MTS treatment at 60 °C, in comparison to 60 s at 50 °C. The Weilbull and Log-logistic models provided the best fitting of the inactivation data for the MTS treatments. Extensive damage of E. coli 0157:H7 cells treated with MTS was observed on micro-images of scanning electron microscopy and transmission electron microscopy.     

Analytic Expression of Geometric Discord in Arbitrary Mixture of any Two Bi-qubit Product Pure States

Quantum correlations in a family of states comprising any mixture of a pair of arbitrary bi-qubit product pure states are studied by employing geometric discord [Phys. Rev. Lett. 105(2010) 190502] as the quantifier. First, the inherent symmetry in the family of states about local unitary transformations is revealed. Then, the analytic expression of geometric discords in the states is worked out. Some concrete discussions and analyses on the captured geometric discords are made so that their distinct features are exposed. It is found that, the more averagely the two bi-qubit product states are mixed, the bigger geometric discord the mixed state owns. Moreover, the monotonic relationships of geometric discord with different parameters are revealed.     

傅里叶变换红外光谱结合化学计量学鉴别预包装纯菠萝汁中外源糖

为了快速、准确鉴别预包装纯菠萝汁是否掺有外源性糖,采用傅里叶变换衰减全反射中红外光谱技术采集900～1 500 cm-1范围内不同批次的预包装纯菠萝汁样品和掺入甜菜糖浆、大米糖浆、木薯糖浆的菠萝汁掺假样品的中红外光谱共计234例,以线性判别分析和支持向量机分析为掺假鉴别模型的建模方法,比较了全波段谱图与通过主成分载荷系数分析选取特征波长图谱的两种掺假鉴别模型。研究表明,全波段图谱的线性判别分析和支持向量机分类模型对验证集的判断正确率均高于88%;选取8个特征波长之后,线性判别分析模型验证集判断正确率提高至96.15%,支持向量机模型验证集判断正确率提高至94.87%,且模型输入变量由312个减少到8个。利用傅里叶变换衰减全反射中红外光谱技术结合化学计量学方法选取特征波长后建立的模型可以较好的应用于预包装纯菠萝汁外源糖的鉴别。     

纯净水生产车间建设及实践教学探索

高职院校实践教学平台的形式多样,校内生产性实训基地是其中之一。化学工程学院纯净水生产车间是陕西国防工业职业技术学院综合考虑化工专业的特殊性进行设计建设的。介绍了车间的设计与建设,描述了车间的运行及教学模式,认为车间的投入运行大大提高了学生的综合实践能力。     

强流脉冲电子束辐照诱发多晶纯铝中的空位缺陷簇结构

利用强流脉冲电子束（HCPEB）技术对多晶纯铝样品进行辐照,采用透射电子显微镜详细分析了辐照诱发的空位簇缺陷.HCPEP辐照后,在辐照表层内形成了大量的四方形空位胞,其间包含位错圈和堆垛层错四面体（SFT）等类型的空位簇缺陷.1次辐照后,空位胞内产生空位型位错圈,5次辐照则主要产生SFT;10次辐照后,空位胞内产生的空位簇缺陷主要是位错圈,局部区域也观察到了SFT缺陷,在产生SFT的附近区域具有很低的位错密度或者几乎无位错出现.HCPEB辐照产生的瞬间加热和冷却诱发了幅值极大且应变速率极高的应力,这一因素 关键词： 强流脉冲电子束 多晶纯铝 空位簇缺陷 堆垛层错四面体