薄膜光学常数的模拟退火算法研究

在薄膜的光学参数拟合时，操作者给定的模型初值对拟合结果有很大的关系。采用广泛用于求解复杂系统优化问题的模拟退火算法来求解薄膜光学常数，降低了操作者给定拟合模型初值的要求。通过对常规的模拟退火算法以及非常快速的模拟退火方法(Very Fast Stimulated Annealing，VFSA)分析，针对性地在模型扰动及退火计划上存在的缺陷作了改进，提高了VFSA算法的计算稳健性。通过大量的拟合实践，验证了提出的改进模拟退火方法的有效性。     

Dynamics of gold clusters on amorphous carbon films induced by annealing in a transmission electron microscope

The change of the size distribution of Au clusters induced by annealing was studied in situ by transmission electron microscopy. Starting from statistically distributed Au clusters on a thin amorphous carbon film, “islands” are formed within a few months storage at room temperature, which consist of Au clusters with sizes <4 nm embedded in a thin Au film. These islands cover originally areas with sizes around 25 × 70 nm². If the temperature is increased in the transmission electron microscope two different processes can be clearly distinguished that lead to the coarsening of the cluster size distribution: cluster coalescence and (contactless) Ostwald ripening. The degree and rate of the coarsening are found to depend on the underlying surface (Au film or amorphous carbon) and the exposure to the high-flux high-energy electron beam, which can be estimated to lead to high-temperature excursions in a cluster on a 10⁻¹² s time scale. The experimental findings are confirmed by Monte-Carlo simulations using the many-body Gupta potentials in order to calculate the Au/Au interaction. Moreover, the results of MC simulations suggest an electron-beam induced formation of a “quasi-two-dimensional gas” of small highly mobile Au species on the Au film, which promotes Ostwald ripening.     

基于顺序形态变换的生物芯片图像网格化

生物芯片图像网格化是对由生物芯片扫描得到的荧光成像中的信号(Foreground)和背景(Background)进行划分,以便提取各点的吸光度值、面积和吸光度比等荧光点的数据。网格化的准确与否决定了数据提取的正确性。提出了一种运用顺序形态变换理论实现生物芯片荧光图像网格化的方法,通过对百分位值在0~1之间的顺序形态进行变换,可实现像素灰度的极小值、中间值等多刻度值的灰度取值运算。理论分析表明,该算法能够识别信号与背景的边界,可去除噪声等非边界信息,能判断信号区域,可确定荧光点的边界和范围,可实现荧光点阵图像的网格化。试验结果表明,该算法对不同信噪比的荧光图像来说有很强的适应性,可用于高密度生物芯片图像的处理。     

薄膜法布里-珀罗滤光片中的超棱镜效应

基于薄膜法布里珀罗滤光片在其峰值波长处具有较大群延迟的特性,设计并从实验上验证了光束倾斜入射时这种结构中存在的超棱镜效应。根据光学薄膜理论中的特征矩阵法,数值模拟计算了器件的群延迟和空间色散曲线,镀制并对器件进行了测试。测试结果表明器件在透射峰值波长处因超棱镜效应引起的空间色散最大位移值达到65μm,与理论计算结果非常吻合;相对于传统的光栅和棱镜器件而言器件具有更高的空间角度色散,实际测试在784.5 nm至786.5 nm波长范围内器件的角色散达到30°/nm。     

Global symmetry breaking in the nonconserved order parameter system during phase ordering

We study global symmetry breaking in the 2D system of scalar nonconserved order parameter following a quench to zero temperature. We show that the instant of time when the symmetry is broken and the final morphology is chosen corresponds to the saturation of the order parameter inside the domains. There are three possible final morphologies: the positive and negative order parameter final morphology, and the state of the coexisting positive and negative order parameter subsystems with a flat interface between them. We find also that each type of the final morphology constitutes about 1/3 of all cases, what agrees with the results obtained recently by Spirin et al. [Phys. Rev. E 65, 016119 (2001)]. Our results are pertinent for the two dimensional systems, but we suspect that there is also a way to apply similar arguments for the three dimensional ones.     

Highly stable amorphous indium‐zinc‐oxide thin‐film transistors with back‐channel wet‐etch process

The stabilities of amorphous indium‐zinc‐oxide (IZO) thin film transistors (TFTs) with back‐channel‐etch (BCE) structure are investigated. A molybdenum (Mo) source/drain electrode was deposited on an IZO layer and patterned by hydrogen peroxide (H₂O₂)‐based etchants. Then, after etching the Mo layer, SF₆ plasma with direct plasma mode was employed and optimized to improve the bias stress stability. Scanning electron microscopy and X‐ray photoelectron spectroscopic analysis revealed that the etching residues were removed efficiently by the plasma treatment. The modified BCE‐ TFTs showed only threshold voltage shifts of 0.25 V and –0.20 V under positive/negative bias thermal stress (P/NBTS, V_GS = ±30 V, V_DS = 0 V and T = 60 °C) after 12 hours, respectively. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Field emission scanning electron microscopy (FE-SEM) as an approach for nanoparticle detection inside cells

When developing new nanoparticles for bio-applications, it is important to fully characterize the nanoparticle's behavior in biological systems. The most common techniques employed for mapping nanoparticles inside cells include transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). These techniques entail passing an electron beam through a thin specimen. STEM or TEM imaging is often used for the detection of nanoparticles inside cellular organelles. However, lengthy sample preparation is required (i.e., fixation, dehydration, drying, resin embedding, and cutting). In the present work, a new matrix (FTO glass) for biological samples was used and characterized by field emission scanning electron microscopy (FE-SEM) to generate images comparable to those obtained by TEM. Using FE-SEM, nanoparticle images were acquired inside endo/lysosomes without disruption of the cellular shape. Furthermore, the initial steps of nanoparticle incorporation into the cells were captured. In addition, the conductive FTO glass endowed the sample with high stability under the required accelerating voltage. Owing to these features of the sample, further analyses could be performed (material contrast and energy-dispersive X-ray spectroscopy (EDS)), which confirmed the presence of nanoparticles inside the cells. The results showed that FE-SEM can enable detailed characterization of nanoparticles in endosomes without the need for contrast staining or metal coating of the sample. Images showing the intracellular distribution of nanoparticles together with cellular morphology can give important information on the biocompatibility and demonstrate the potential of nanoparticle utilization in medicine.     

Optimization of the CIGS based thin film solar cells: Numerical simulation and analysis

Chalcopyrite Cu(In,Ga)Se (CIGS) is a very promising material for thin film photovoltaics and offers a number of interesting advantages compared to the bulk silicon devices. CIGS absorbers today have a typical thickness of about 1–2 μm. However, on the way toward mass production, it will be necessary to reduce the thickness even further. This paper indicates a numerical study to optimization of CIGS based thin film solar cells. An optimum value of the thickness of this structure has been calculated and it is shown that by optimizing the thickness of the cell efficiency has been increases and cost of production can be reduces. Numerical optimizations have been done by adjusting parameters such as the combination of band gap and mismatch as well as the specific structure of the cell. It is shown that by optimization of the considered structure, open circuit voltage increases and an improvement of conversion efficiency has been observed in comparison to the conventional CIGS system. Capacitance–voltage characteristics and depletion region width versus applied voltage for optimized cell and typical cell has been calculated which simulation results predict that by reducing cell layers in the optimized cell structure, there is no drastically changes in depletion layer profile versus applied voltage. From the simulation results it was found that by optimization of the considered structure, optimized value of CIGS and transparent conductive oxide thickness are 0.3 μm and 20 nm and also an improvement of conversion efficiency has been observed in comparison to the conventional CIGS which cell efficiency increases from 17.65 % to 20.34%, respectively.     

Probing mechanical properties of thin film and ceramic materials in micro- and nano-scale using indentation techniques

In this study, we report on the mechanical properties, failure and fracture modes in two cases of engineering materials; that is transparent silicon oxide thin films onto poly(ethylene terephthalate) (PET) membranes and glass-ceramic materials. The first system was studied by the quazi-static indentation technique at the nano-scale and the second by the static indentation technique at the micro-scale. Nanocomposite laminates of silicon oxide thin films onto PET were found to sustain higher scratch induced stresses and were effective as protective coating material for PET membranes. Glass-ceramic materials with separated crystallites of different morphologies sustained a mixed crack propagation pattern in brittle fracture mode.     

高温超导薄膜在微波双工器上的应用

本文采用全波电磁仿真方法设计、制作并测试了一种工作于C波段的星载高温超导微波双工器,采用的材料是在厚度为0.5mm介电常数为23.5的LaAlO3衬底上用磁控溅射法制备而成的双面氧化物高温超导薄膜YBCO.利用在微波范围内,高温超导薄膜的Q值比常规导体高1～3个数量级的特点,实现了器件的小型化和低插损.