Sonoelectroanalysis: investigation of bismuth-film-modified glassy carbon electrodes

Bismuth-modified glassy carbon electrodes have been investigated for their suitability in sonoelectroanalysis. The stability of the bismuth film to the application of ultrasound was assessed via voltammetric and atomic force microscopy (AFM) studies which revealed little ablation at powers up to an intensity of 130 W cm^–2 delivered from a 25-kHz sonic horn. Furthermore, bismuth-film-modified glassy carbon electrodes were evaluated for the sonoelectroanalytical quantification of zinc and cadmium. Detection limits of 2×10^–7 M and 6×10^–9 M respectively were found after a 60-s deposition time via an acoustically assisted deposition protocol.     

Processing and characterization of Pb(Mg,Nb)O3-PbTiO3 thin films from metal alkoxide-derived gels

The sol-gel processing is one of promising methods to fabricate well-derived integrated thin films at relatively low temperature. Ferroelectric niobates films do afford the possibilities for adding the values by the hybridization with semiconductor and/or electro-optic systems. The molecular level designing of the precursor solution was stressed as well as the control of key processing factors. The advantages of this sol-gel have been extended to prepare the ferroelectric Pb(Mg, Nb)O₃-PbTiO₃ solid solution films integrated on Si wafers. The crystallization of the films with desired crystal structure could be promoted by the controlled partial hydrolysis of designed alkoxide solution in the intermediate state and the pre-heated treatment of alkoxide-derived films in flow of water vapor and oxygen gas mixture.     

二维光学薄膜的气敏反射光谱特性

研究二维光学薄膜ＳｎＯ２：ＴｉＯ２在乙醇、丙酮、氨蒸汽中的气敏反射光谱，发现它与厚膜（膜厚２０μｍ）的气敏反射光谱有明显的差异，它的反射光强在气体浓度较低时随气体浓度增加而增强，气体浓度较高时则现象相反，并且它的反射峰会发生位移。利用不同气体的反射峰的气敏特性，可制成有气体选择性的气敏光纤传感器。     

Effect of the protonation level of poly(o-phenylenediamine) (PoPD) on the ac impedance of humidity-sensitive PoPD/poly(vinyl alcohol) composite film

A composite film consisting of poly(o-phenylenediamine) (PoPD) and poly(vinyl alcohol) (PVA) has been prepared, and the effect of the protonation level of PoPD on the response of the composite to humidity been investigated by ac impedance measurements. The electrochemical system of the PoPD/PVA composite in a humid atmosphere is represented by an electrochemical equivalent circuit containing film (R_film, C_film), Warburg (W) and interfacial (R_ct, C_dl) impedance. R_film was increased with decreasing protonation level of the PoPD in relative humidity regions higher than 40%, but it was almost independent of the protonation level in humidity regions lower than this percentage.     

A study of bismuth-film electrodes for the detection of trace metals by anodic stripping voltammetry and their application to the determination of Pb and Zn in tapwater and human hair

This work reports the simultaneous determination of Cd(II), Pb(II) and Zn(II) at the low μg l⁻¹ concentration levels by square wave anodic stripping voltammetry (SWASV) on a bismuth-film electrode (BFE) plated in situ. The metal ions and bismuth were simultaneously deposited by reduction at −1.4 V on a rotating glassy carbon disk electrode. Then, the preconcentrated metals were oxidised by scanning the potential of the electrode from −1.4 to 0 V using a square-wave waveform. The stripping current arising from the oxidation of each metal was related to the concentration of each metal in the sample. The parameters for the simultaneous determination of the three metals were investigated with the view to apply this type of voltammetric sensor to real samples containing low concentrations of metals. Using the selected conditions, the limits of detection were 0.2 μg l⁻¹ for Cd and for Pb and 0.7 μg l⁻¹ for Zn at a preconcentration time of 10 min. Finally, BFE's were successfully applied to the determination of Pb and Zn in tapwater and human hair and the results were in satisfactory statistical agreement with atomic absorption spectroscopy (AAS).     

Differential pulse voltammetric determination of trace Te(IV) at a poly(3,3′-diaminobenzidine) film modified gold electrode in flow systems

Electropolymerization of 3,3′-diaminobenzidine on a gold surface gave an adherent, stable film of poly(3,3′-diaminobenzidine) (PDAB). This polymer film retained the complexational functionalities of its monomer, demonstrating preconcentration abilities for several ions, including Se(IV) and Te(IV). In particular, in this work, continuous flow and flow injection methods were developed for the sensitive and selective determination of Te(IV). The optimized method for the continuous flow mode had a detection limit of 5.6×10⁻⁹ mol l⁻¹ for 10 min preconcentration. Typical relative standard deviations for six consecutive determinations were 1.82 and 2.56% for Te(IV) concentrations of 1.0×10⁻⁶ and 5.0×10⁻⁸ mol l⁻¹, respectively (10 min preconcentration). The method was applied to the determination of Te(IV) in real samples.     

碳纤维汞膜微电极1.5次微分伏安法测定米托蒽醌的研究

米托蒽醌（ＭＸＴ）能吸附在碳纤维汞膜微电极表面，阴极溶出时，产生一个灵敏的１．５次微分溶出峰，其峰电流和米托葱酿的浓度在１．０×１０－５ｍｏｌ／Ｌ～１．３×１０－９ｍｏｌ／Ｌ范围内具有良好的线性关系，经３ｍｉｎ的富集，检出限可达１．０×１０－１０ｍｏｌ／Ｌ，据此建立了测定ＭＸＴ的灵敏的新方法，本文讨论了实验条件，并对血样中的ＭＸＴ进行了测定。     

Effect of surfactants on the stability of thin liquid film flow on a rotating disk

The effect of surfactants on surface instabilities of thin liquid film flow on a rotating disk was studied at different flow rates Q (0.5相似文献   

SYNTHESIS AND PROPERTIES OF SULFONATED POLY（ARYLENE ETHER） CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.     

Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.