高频介质系统介电性能与相组成的定量关系分析

采用普通电子陶瓷工艺制备两种高频介质系统ZnO-B2O3-SiO2三元系和BaO-PbO-Nd2O3-Bi2O3-TiO2五元系,通过XRD分析确定各系统的主晶相, 运用衍射峰强度计算法准确测定出各组分的体积百分含量,并代入Lichnetecker对数混合定则,计算出系统的介电性能,获得了分析介质系统介电性能与物相含量之间定量关系的新方法.     

大口径光学元件波前调制PSD模拟分析

 使用PSD作为大口径光学元件表面加工质量的评价参数，针对不同的波前调制进行了初步的模拟计算，得到了不同调制频率和不同调制深度情况下的PSD曲线变化情况。当调制频率不同时，PSD曲线的突变部分会发生相应的频移，调制频率高则突变发生在空间频率较高的频段，同时PSD峰值不变。相对应调制深度不同时，PSD曲线的突变部份峰值发生变化，调制深度大则峰值大，与此同时峰值出现的位置不会发生变化。计算和分析结果表明PSD分析结果能够在频率域反应出元件表面受到的不同程度的调制信息。     

电爆炸箔断路开关的理论和实验研究

 采用金属箔电爆炸过程的二维数值计算模型，对含电爆炸金属箔断路开关的电感储能脉冲功率调节系统进行了数值计算。以此为基础，研制出了一种低电感型的电爆炸箔断路开关，并以4μF/75kV脉冲电容器组作为初级能源，13Ω电阻作为负载进行实验研究。研究结果表明：在负载上可获得约250kV，脉宽大于400ns的脉冲电压。     

强流射频四极加速器输入耦合环的物理设计研究

 详细讨论了强流射频四极加速器高频输入耦合环的一些基本问题，完成了高频输入耦合环的初步物理设计. 利用二维程序Superfish 的一些结果，确定了耦合环的大小，计算了耦合环的功耗，并对构成耦合环导线的粗细进行了估算。该耦合环的物理设计可作为耦合环试验的基础，同时，也可作为三维程序HFSS 模拟计算的起点。     

SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

Temperature Dependence of Integrated Intensity Bands in IR-Absoption Spectra of (NH4)2AF6 Complexes

The contribution refers to the temperature dependence of IR-absorption spectra (NH₄)₂AF₆ (A - Si and Ge). It is found that with temperature decreasing, the integrated intensities of the bands corresponding to anion fundamentals, increase, while those of cation, decrease. An explanation is given to the phenomena detected, which is based on variations in the strength of the outer-sphere interaction with the temperature, and subsequent redistribution of electron density.     

Naphthodithiophene-based donor materials for solution processed organic solar cells

As an emerging donor building block, naphthodithiophene (NDT) is causing more concerns in the field of organic semiconductors. With the rigid and coplanar molecule structure, NDT will exhibit more application space relying on its own advantage for facilitating the charge carrier transport. In this review article, we have summarized the development progress on the NDT-based donor materials for solution processed organic solar cells. Discussions and comments on those representative NDT type materials about structure and property are also presented.     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

Opinion dynamics in networks with heterogeneous confidence and influence

We propose a discrete-time model of opinion dynamics. The neighborhood relationship is decided by confidence radius and influence radius of each agent. We investigate the influence of heterogeneity in confidence/influence distribution on the behavior of the network. The simulations suggest that the heterogeneity of single confidence or influence networks can promote the opinions to achieve consensus. It is shown that the heterogeneous influence radius systems converge in fewer time steps and more often in finite time than the heterogeneous confidence radius systems. We find that heterogeneity does not always promote consensus, and there is an optimal heterogeneity so that the relative size of the largest consensus cluster reaches maximum in heterogeneous confidence and influence networks.