强流中性源的供电系统

本文简要介绍了7×35cm~2多灯丝大面积源的供电保护系统,给出了该系统的基本设计思想,电源简化原理图及主要电路特点和已达到的技术指标。     

非自持和非麦氏分布情况下托卡马克堆芯等离子体功率平衡

本文给出一组托卡马克堆芯等离子体功率平衡方程,它描述了在非自持和非麦氏分布情况下等离子体功率平衡的问题,计算结果表明。在现实可行的聚变堆工程和相应的等离子体参数情况下,堆芯中每秒可产生聚变中子PN大于10~19。     

Thermosonicated whey protein concentrate blends on quality attributes of reduced fat Panela cheese

Aiming at producing a reduced fat cheese (RFC) as an alternative to full-fat Panela cheese, a highly consumed fresh Mexican dairy product, thermosonication (TS) processes (24 kHz, 400 W nominal power, 2, 4 and 6 min; 50, 55 and 60 °C) were evaluated to treat WPC (80% protein) blended with reduced-fat milk (1 and 2% fat), which were later LTLT pasteurized. TS blends were compared in terms of their technological properties (water holding capacity-WPC, gel firmness- GF, color, pH and titratable acidity) with those of a regular full fat (3%) LTLT pasteurized milk used as a control. Afterwards, a regression analysis was carried out with the obtained data in order to select the most appropriate conditions for cheesemaking purposes (similar GF, higher WHC with respect to the control), minimize both fat content and TS treatment duration to minimize energy expenses. According to these restrictions, the selected conditions were 1.5% fat milk-WPC blend, TS treated at 60 °C for 120 s; 1% fat milk-WPC blend, TS treated at 50 °C for 120 s and 1% fat milk-WPC blend, 50 °C for 144 s, which allowed preparing low fat cheeses (LFCs). These TS treatments were applied in a larger scale to elaborate Panela-type LFCs comparing different technological properties (cheese yield, syneresis, water content, texture profile analysis, color and titratable acidity) with those of a full fat variety, at day 1 and during 14 days of refrigerated storage. Results showed similar texture profiles of LFC cheeses and full fat milk cheeses throughout their storage period with significant changes in composition parameters (higher moisture, protein and salt contents, with low fat percentages), syneresis, selected color parameters (hue, b*), with no observed changes in cheese yield, TA and pH during cheese storage. These promising results are encouraging to develop LFCs with no physicochemical or technological defects using novel processing techniques that may help reducing calorie consumption without compromising sensory acceptability.     

磁场电源在 HL-2M 装置初始等离子体放电中的应用

磁场电源是 HL-2M 装置初始等离子体放电的重要组成部分,它关系到 HL-2M 装置零场的建立,等 离子体的击穿和维持及位形控制。为实现初始等离子体放电所需的供电电压和电流,对磁场电源从主回路、控制、 测量和保护分别作了相应的调整。在此基础上进行了大量的工程调试,确保了磁场电源的控制和保护等性能达到 初始等离子体放电的需求。在磁场电源运行中,电源控制性能和输出参数的一致性、纹波质量等都有显著提高。 介绍了磁场电源在调试及 HL-2M 装置初始放电中的应用。     

HL-2M 装置供电系统研制

为满足 HL-2M 装置的供电需求,须配套建设相应的供电系统。通过仿真计算 HL-2M 装置的总体供 电需求,考虑到 HL-2A 装置现有的供电系统设备,提出了兼顾 HL-2A 和 HL-2M 装置供电需求的总体配置方案。介绍了国内首台 300MVA 立式交流脉冲发电机组、磁体电源、高压电源和电源控制系统的研制情况。     

Temperature Effect on Power for Particle Detachment from Pore Wall Described by an Arrhenius-Type Equation

An Arrhenius-type asymptotic-exponential function is derived to describe the temperature dependence of the power needed for detachment of fine particles from pore walls in porous media.     

高功率准分子激光主振荡功率放大系统光学元件的稳定性

为了分析高功率准分子激光主振荡功率放大(MOPA)系统中各光学元件稳定性对靶面光斑定位精度的影响,建立了分析模型,利用分析结果指导高稳定性镜架设计以满足系统实验需求。根据高功率准分子激光MOPA系统特点,有效地简化了系统光路,建立了系统光路模型;按照系统打靶精度要求,利用三维坐标变换和光线追迹法,计算得到了系统单个光学元件稳定性对靶面光斑定位精度的影响规律;最后,对自行设计的镜架进行了稳定性测量。计算结果表明,反射镜的旋转变化和透镜垂直光轴的平移变化是影响靶面光斑定位精度的主要因素,且主放大光路中反射镜在X方向和Y方向上最大的变化范围分别不能超过0.8和1.6μrad。实际测量结果表明,设计的镜架在X方向和Y方向最大的变化范围分别为0.6和0.81μrad,满足系统实验要求。     

长周期光纤光栅的功率特性

用Matlab编程的方法对长周期光栅功率特性进行了研究,数值模拟了长周期光栅入射角度、光栅长度与功率分布的图像关系.研究结论为长周期光纤光栅的设计提供理论依据.     

Directional coupler design based on coupled cavity waveguides in photonic crystals

We propose a directional coupler design based on coupled cavity waveguide in photonic crystals. The plane wave expansion is used to give the dispersion of the coupled cavity waveguides and two parallel such waveguides. The couple length is got from the dispersion curves. Based on the research of the dispersion, we present a directional coupler and the transmission property is given. This structure is potentially important for highly efficient directional coupler in integrate optical circuit.     

Power coupler kick of the TRIUMF ICM capture cavities

The TRIUMF Injector CryoModule (ICM) adapted two superconducting single cavities as the capture section for the low injecting energy of 100 keV electrons. Coupler kick induced beam deflection and projected emittance growth are one of the prime concerns of the beam stability, especially at low energies. In low energy applications, the electron velocity changes rapidly inside the cavity, which makes the numerical analysis much more complicated. The commonly used theoretical formulas of the direct integral or the Panofsky- Wenzel theorem is not suitable for the kick calculation of β <1 electrons. Despite that, the above mentioned kick calculation method doesn't consider injecting electron energy, the beam offset due to the coupler kick may not be negligible because of the low injection energy even if the kick is optimized. Thus the beam dynamics code TRACK is used here for the simulation of the power coupler kick perturbation. The coupler kick can be compensated for by a judicious choice of the coupler position in successive cavities from upstream to downstream. The simulation shows that because of the adiabatic damping by the following superconducting 9-cell cavity, even for the worst orbit distortion case after two capture cavities, the kick is still acceptable at the exit of the ICM after reaching 10 MeV. This paper presents the analysis of the transverse kick and the projected emittance growth induced by the coupler for β <1 electrons. The simulated results of the TRIUMF ICM capture cavities are described and presented.