旋转热管生物反应器的流场模拟研究

采用热管技术对传统生物反应器进行革新,自主开发出一种适用于多种生物反应的新型生物反应器,提出了将热管本身作为搅拌轴的设计思想,同时以计算流体力学(CFD)为基础建立旋转热管生物反应器的数学模型,计算了不同雷诺数下此类搅拌轴的功率准数,并得到了功率曲线。采用标准k-ε湍流模型成功模拟了反应器内的速度分布,为反应器的优化设计提供了基础。     

空地激光通信跟踪精度主要外界影响因素研究

为了分析空地激光通信外界因素对跟踪精度的影响情况,将平台振动、大气湍流和背景光三个主要影响因素归结到对跟踪精度影响的统一框架下进行了研究。使用实际测量得到的平台振动数据,建立空地激光通信跟踪仿真系统,分析了不同条件下,三种外界因素对跟踪精度的综合影响情况。在文中假设基础上,分析可知:粗跟踪单元可以较好的抑制地面运动平台的振动,保证激光能够进入精跟踪视场;中强度的湍流使精跟踪残差标准差增大4倍左右,如果试验地点选择在高海拔地区,大气湍流使精跟踪残差标准差增大2倍左右。     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.     

Mechanism and control of molecular energy flow: a modeling perspective

 Vibrational energy flow in organic molecules occurs by a multiple-time-scale mechanism that can be modeled by a single exponential only in its initial stages. The mechanism is a consequence of the hierarchical structure of the vibrational Hamiltonian, which leads to diffusion of vibrational wavepackets on a manifold with far fewer than the 3N−6 dimensions of the full vibrational state space. The dynamics are controlled by a local density of states, which does not keep increasing with molecular size. In addition, the number of vibrational coordinates severely perturbed during chemical reaction is small, leading to preservation of the hierarchical structure at chemically interesting energies. This regularity opens up the possibility of controlling chemical reactions by controlling the vibrational energy flow. Computationally, laser control of intramolecular vibrational energy redistribution can be modeled by quantum-classical, or by purely quantum-mechanical models of the molecule and control field. Received: 26 July 2002 / Accepted: 30 September 2002 / Published online: 2 December 2002 Electronic Supplementary Material to this paper can be obtained by using the Springer Link server located at http://dx.doi.org/10.1007/s00214-002-0394-2. Acknowledgements. This work was supported by NSF grant CHE 9986670. Correspondence to: M. Gruebele e-mail: gruebele@scs.uiuc.edu     

骨架非稠合的电子受体在聚合物太阳能电池中的应用

Non-fullerene electron acceptors have attracted enormous attention of the research community owing to their advantages of optoelectronic and chemical tunabilities for promoting high-performance polymer solar cells (PSCs). Among them, fused-ring electron acceptors (FREAs) are the most popular ones with the good structural planarity and rigidity, which successfully boost the power conversion efficiencies (PCEs) of PSCs to over 14%. In considering the cost-control of future scale-up applications, it is also worthwhile to explore novel structures that are easy to synthesize and still maintain the advantages of FREAs. In this work, we design and synthesize a new electron acceptor with an unfused backbone, 5, 5'-((2, 5-bis((2-hexyldecyl)oxy)-1, 4-phenylene)bis(thiophene-2-yl))bis(methanylylidene)) bis(3-oxo-2, 3-dihydro-1H-indene-2, 1-diylidene))dimal-ononitrile (ICTP), which contains two thiophenes and one alkoxy benzene as the core and 2-(3-oxo-2, 3-dihydroinden-1-ylidene) malononitrile (IC) as the terminal groups. The synthetic route to ICTP involves only three steps, with high yields. Density functional theory calculations indicate that the non-covalent interactions, O…H and O…S, help reinforce the space conformation between the central core and the terminals. ICTP shows broad and strong absorption in the long-wavelength range between 500 and 760 nm. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of ICTP were measured to be -5.56 and -3.84 eV by cyclic voltammetry. The suitable absorption and energy levels make ICTP a good acceptor candidate for medium bandgap polymer donors. The best devices based on PBDB-T:ICTP showed a PCE of 4.43%, with an open circuit voltage (V_OC) of 0.97 V, a short circuit current density (J_SC) of 8.29 mA∙cm^-2, and a fill factor (FF) of 0.55, after adding 1% 1, 8-diiodooctane (DIO) as the solvent additive. Atomic force microscopy revealed that DIO could ameliorate the strong aggregation in the blended film and lead to a smoother film surface. The hole and electron mobilities of the optimized device were measured to be 9.64 and 2.03 × 10^-5 cm²∙V^-1∙s^-1, respectively, by the space-charge-limited current method. The relatively low mobilities might be responsible for the moderate PCE. Further studies can be performed to enlarge the conjugation length by including more aromatic rings. This study provides a simple strategy to design non-fullerene acceptors and a valuable reference for the future development of PSCs.     

生物电化学系统降解多环芳烃萘及微生物群落研究

采用单室空气阴极微生物燃料电池(MFC)反应器构型, 以不同浓度萘为基底物质, 考察MFC的产电性能、 萘降解率、 化学需氧量(COD)和总有机碳含量(TOC)降解率及MFC阴阳极微生物活性和多样性. 结果表明, 循环伏安曲线受不同浓度萘的影响变化较为明显, 随着萘浓度的增大, 最大功率密度呈下降趋势, 且萘对MFC的阴极电极电势影响较大; 当萘的浓度为15 mg/L时, MFC最大功率密度可达(645.841±28.08) mW/m ²; 对萘的降解率高达100%, 且MFC对COD和TOC的降解率随着萘浓度的提高而增大, 但是增大的速率逐渐减小. 对MFC阳极微生物膜进行高通量测序发现, Geobacter是优势菌属, 相对丰度达81%, 阴极主要以Aquamicrobium为主.     

DAR成色剂结构与性能的关系

通过分析DAR成色剂的结构和作用机理,讨论了其结构与照相性能之间的关系.DAR成色剂的结构可表示为:Cp—L—A,其中Cp代表成色剂母体,A代表促进显影的功能基团即增强基团,L代表连接基团同时也有吸附功能即吸附基团.本文指出:当吸附基团和增强基团相同时,母体对照相性能影响不大;当母体及增强基团相同时,吸附基团的吸附性越强,照相性能越好;当母体及吸附基团相同时,增强基团的感染显影作用越强,照相性能越好.     

The statistical overlap theory of chromatography using power law (fractal) statistics

The chromatographic dimensionality was recently proposed as a measure of retention time spacing based on a power law (fractal) distribution. Using this model, a statistical overlap theory (SOT) for chromatographic peaks is developed that estimates the number of peak maxima as a function of the chromatographic dimension, saturation and scale. Power law models exhibit a threshold region whereby below a critical saturation value no loss of peak maxima due to peak fusion occurs as saturation increases. At moderate saturation, behavior is similar to the random (Poisson) peak model. At still higher saturation, the power law model shows loss of peaks nearly independent of the scale and dimension of the model. The physicochemical meaning of the power law scale parameter is discussed and shown to be equal to the Boltzmann-weighted free energy of transfer over the scale limits. The scale is discussed. Small scale range (small β) is shown to generate more uniform chromatograms. Large scale range chromatograms (large β) are shown to give occasional large excursions of retention times; this is a property of power laws where "wild" behavior is noted to occasionally occur. Both cases are shown to be useful depending on the chromatographic saturation. A scale-invariant model of the SOT shows very simple relationships between the fraction of peak maxima and the saturation, peak width and number of theoretical plates. These equations provide much insight into separations which follow power law statistics.     

Synthesis,characterizations, and electrochemical studies of ZnO/reduced graphene oxide nanohybrids for supercapacitor application

Herein the present article reports the fabrication of ZnO/reduced graphene oxide (ZnG) nanohybrid following a reduction-based process using a non-hazardous material, i.e., ascorbic acid. The morphology, structure, and bonding in the nanohybrid were analyzed using different techniques. Atomic force microscopy and scanning electron microscopy images show spherical particles of ZnO distributed over reduced graphene oxide (rGO). The X-ray diffraction analysis gives calculated values of crystallite size for ZnO as 15.62 nm. The successful incorporation of ZnO nanoparticles into rGO was confirmed using energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses. The electrochemical studies were performed using an electrolyte (0.5 M H₂SO₄). The calculated value of specific capacitance for the nanohybrid was 345 Fg^-1, which was found to be almost double as compared to that of rGO, which is having a value of only 190.5 Fg^-1 at the same scan rate. The nanohybrid also showed excellent capacitance retention after 1,000 cycles.